Electron Microscopes
Electron Microscopy Sciences EMS Molybdenum Aperture with 15 µm hole, 3 mm O.D., 0.24 mm thick
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences EMS Carbon Rods
Carbon Rods for the EMS 975 and 975S turbo evaporator. Rods have a 6.15mm diameter.
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on Gilder F1 Finder Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Standard Pin SEM Stub Mini, 6.6 x 1.3 mm Head, 9.5 mm Pin, Aluminum
Mini SEM pin stub mount for Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, Tescan, ETEC and Amray. Made from lathe finished ultra-pure aluminum.
Head: 6.6 x 1.3 mm
Pin height: 3/8"
Electron Microscopy Sciences Formvar/Carbon Support Film 10 nm/1 nm thick on Gilder F2 Finder Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Hexagonal 400 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface with 12 Divisions, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 1/4"
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Hexagonal 200 mesh Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Gold
Electron Microscopy Sciences Gilder Aperture Grid with Single 200 µm hole, Copper
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 200 um.
Material: Copper
Electron Microscopy Sciences Geological Thin Section Holder 9.5 mm
This thin section holder is made from aluminum with copper clips and brass screws. The unit measures 55x30x8 mm and holds a standard geological thin section or slide measuring 47 x 27 mm. The holder comes complete with 2 clips to insure nothing moves. The holder has convenient tweezer inserts which allow for easy loading.
Electron Microscopy Sciences EMS Molybdenum Aperture with 60 µm hole, 3 mm O.D., 0.24 mm thick
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences Formvar Support Film 5-6 nm thick on London Finder LF135 Nickel Grid
A thin film of pure formvar resin coats the shiny side of a London finder grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in grid storage box. Standard coating is 5 to 6 nm thick.
Grid: Nickel
Electron Microscopy Sciences SEM Cylinder Mount 45° Angle 5/8" Surface, Aluminum
Scanning electron microscope specimen mount with 45 degree angle. Made from lathe finished ultra-pure aluminum.
Head: 5/8"
Height: 3/8"
Electron Microscopy Sciences Metallurgical Mount Holder 1" and 30 mm, 3.2 mm x 8mm Pin
This mount holder which is made from machined aluminum with stainless steel Allen screws. Desgned specifically for use with 1 1/4" and 30 mm metallurgical mounts.
Type: 3.2 mm x 8 mm Pin
Electron Microscopy Sciences Gilder Parallel Bar Grid G150PB, Copper
Gilder grids are a reliable support specimen grid for transmission electron microscopy. They feature a well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected.
Material: Copper
Pitch: 165 µm
Hole: 115 µm
Bar: 50 µm