Electron Microscopes
MCMASTER CARR SUPPLY COMPANY SLTTD SCREW 18-8SS 00-90 1/8IN
NC3373042 SLTTD SCREW 18-8SS 00-90 1/8IN
Electron Microscopy Sciences SEM Wafer Holder, 100 mm
These wafer holders are made from aluminum and feature brass clips which secure the wafers. Each holder comes with a 0.125" (3.2 mm) pin of 0.375" (9.5 mm) length. Accomodates 4" (100 mm) diameter wafer.
Size: 100 mm
Ted Pella Inc Standard SEM Pin Stub Mount, Ø12.7mm x 8mm pin height, 1000/pack
FEI, Tescan, ZEISS (also for Philips, Aspex, LEO, Cambridge, AMRAY, Leica, CamScan, ETEC), aluminum, grooved edge
World Precision Instrument SU-MPC200 Motorized Micromanipulator Controllers-505093
Neurobiological experiments are becoming more complex. Many require multiple manipulators with control units that quickly become space and/or cost prohibitive. The MPC-200 is the solution you have been asking for. A single controller capable of running 2 manipulators! With the simplicity of the SU-MP225 controller, it was expanded to run two manipulators from a single controller/ROE. The MPC-200 works with one or two of our world-renowned mechanicals, the SU-MP285 (SU-MPC385), the SU-MP225 (SU-MPC325) or the narrow format SU-MP265 (SU-MPC365).
Electron Microscopy Sciences ExP Vacuum Wand Kit for 6" (150mm) wafers, Molded PEEK wafer tip, ⅛" coiled hose and stand
ExP Vacuum Wand wafer handling kits are a lower cost alternative to the Porta-Wand and Porta-Vac II systems, which share the same tips. Has a push-button to close the vacuum and release the wafer. The included stand keeps the button pressed when the wand is not in use. Comes complete with an ⅛" Inner Diameter coiled vacuum hose and a wafer tip. Must use a vacuum pump or vacuum line. Able to be used with our Vacuum Pick Up System. Comes with 1/8" coiled hose and stand.
Includes: Molded PEEK wafer tip, ⅛" coiled hose and stand
World Precision Instrument SU-MP85 Micromanipulator-SU-MP85-L
The classic micromanipulator developed by Sir Huxley many years ago is still considered by many investigators to be the finest manual micromanipulator available. The SU-MP85 offers the advantage of a very large range of movement with its built-in coarse manipulator and precise submicron movement with the fine controls. Coarse positioning is achieved with a three axis manipulator mounted on top. The ultrafine positioning is accomplished with the large micrometers mounted on the base. These micrometers provide smooth, precise movement through a 10:1 reduction mechanism.
Grainger Toolholder Vise Steel BT 50 Taper Tools
The HUOT Toolholder Vise For BT50 Taper 16T927 is a toolholder vise designed for use with BT50 toolholders. It features a BT50 taper to hold toolholders rigidly and accurately. The vise has a 5" jaw width and opens to 7" to accommodate large toolholders. It's made from fine grain iron for strength and rigidity. The vise comes with a removable chip guard and is hardened to 48-52 HRC. It weighs approximately 35 lbs. The vise provides a rigid setup for milling, grinding, inspection, and tool presetting operations when used with BT50 toolholders.