Electron Microscopes
Electron Microscopy Sciences EMS Molybdenum Aperture with 25 µm hole, 3 mm O.D., 0.24 mm thick
O.D.: 3 mm
Thickness: 0.24 mm
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1" surface, 13/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1"
Height: 13/16"
Electron Microscopy Sciences Forensic Certified SEM Mount 8 mm pin
This mount is made from a special certified Aluminum alloy which does not contain any of the objectionable elements that may interfere with samples collected for GSR . These mounts are 12.7 mm x 11 mm.
Electron Microscopy Sciences EMS Lacey Carbon Film 50 µm holes on 400 mesh Au
This carbon coated film on a broken pattern consists of woven-mesh-like holes of different sizes and shapes. This type of pattern provides support but does not interfere when observing specimen sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Gold
Hole: 50 µm
Electron Microscopy Sciences EMS Lacey Carbon Film 50 µm holes on 200 mesh Au
This carbon coated film on a broken pattern consists of woven-mesh-like holes of different sizes and shapes. This type of pattern provides support but does not interfere when observing specimen sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Gold
Hole: 50 µm
Electron Microscopy Sciences Conductive Aluminum/Nickel Tape
Electrically conductive and with a clean background, the tape is ideal for scanning electron microscopy (SEM). Pressed thin Al. Adhesive power/25mm width: 840 gf. Capacity after 60 min: 0.1mm.
Conductive resistivity: 0.008ohm/sq. Inch
Thickness: 0.09 mm
Pad: 0.035 mm
Adhesive: 0.040mm
Electron Microscopy Sciences EMS Holey Carbon Film 50 µm holes on 400 mesh Nickel
A thin film of carbon with round holes. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid.
Grid: Nickel
Holes: 50 µm
Electron Microscopy Sciences Gilder Single Slot Oval Grid G215, Gold, 2000 x 150 µm Slot
Single Slot TEM Grids with oval holes have a thickness of are 50 microns. Each grid is individually inspected.
Material: Gold
Slot: 2000 x 150 µm
Electron Microscopy Sciences Gilder Parallel Bar Grid G150P, Nickel
Gilder grids are a reliable support specimen grid for transmission electron microscopy. They feature a well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected.
Material: Nickel
Pitch: 165 µm
Hole: 115 µm
Bar: 50 µm
Electron Microscopy Sciences EMS Molybdenum Aperture with 70 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences Gilder Standard Square 50 mesh Gold Grid
A reliable support specimen grid source. Features well-defined grid bars, maximum open area, and a matt/shiny side. Each grid is individually inspected. 3.05 mm diameter, 0.7 mil (18 um) thickness.
Grid: Gold
Pitch: 500 µm
Hole: 420 µm
Bar: 80 µm
:
Electron Microscopy Sciences Gilder Aperture Grid with Single 300 µm hole, Gold
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 300 um.
Material: Gold
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Single 100 µm hole Nickel Grid
A thin film of pure carbon deposited on the shiny side of the single hole grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Nickel
Electron Microscopy Sciences EMS Molybdenum Aperture with 20 µm hole, 6 mm O.D., 0.24 mm thick
O.D.: 6 mm
Thickness: 0.24 mm
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Single 600 µm hole Copper Grid
A thin film of pure carbon deposited on the shiny side of the single hole grid. All of our coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. Standard thickness is 5-6 nm.
Grid: Copper