Electron Microscope Accessories
Buehler EpoThin™ 2 mix ratio 2:1 by volume, Hardener 16oz [0.48L]
EpoThin™ 2 mix ratio 2:1 by volume, Hardener 16oz [0.48L]
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Hexagonal 100 mesh Nickel Grid
Our high quality coated grids will make your microscopy work easier and save you time. A thin film of pure carbon deposited on one side of the grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in a grid storage box. Standard thickness is 5-6 nm.
Grid: Nickel
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Hexagonal 100 mesh Copper Grid
Our high quality coated grids will make your microscopy work easier and save you time. A thin film of pure carbon deposited on one side of the grid. Coated grids are optically checked and batch tested in the electron microscope. Packed in a grid storage box. Standard thickness is 5-6 nm.
Grid: Copper
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Hexagonal 600 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences Gilder Single Slot Oval Grid G153, Copper, 1500 x 300 µm Slot
Single Slot TEM Grids with oval holes have a thickness of are 50 microns. Each grid is individually inspected.
Material: Copper
Slot: 1500 x 300 µm
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Single 150 µm hole Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel
Electron Microscopy Sciences Gilder Single Slot Oval Grid GS2x0.5, Gold, 2000 x 500 µm Slot
Single Slot TEM Grids with oval holes have a thickness of are 50 microns. Each grid is individually inspected.
Material: Gold
Slot: 2000 x 500 µm
Electron Microscopy Sciences Gilder Single Slot Oval Grid G102, Nickel, 1000 x 200 µm Slot
Single Slot TEM Grids with oval holes have a thickness of are 50 microns. Each grid is individually inspected.
Material: Nickel
Slot: 1000 x 200 µm
Electron Microscopy Sciences EMS Molybdenum Aperture with 150 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 20 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 50 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences EMS Molybdenum Aperture with 10 µm hole, 3 mm O.D., 0.12 mm thick
O.D.: 3 mm
Thickness: 0.12 mm
Electron Microscopy Sciences Carbon Adhesive Tabs, 12 mm
Two sides of thick conductive adhesive (45 um) with the center conductive core film (35 um). Use for SEM including GSR. 125 um thick. No gas out-gassing. Traces of Si, Sb, S, Fe, Mg, Na.
Diameter: 12 mm
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Thin Bar Hexagonal 600 mesh Nickel Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Nickel