Electron Microscope Specimen Mounts and Holders
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface, 1/4" height, Aluminum
Hitachi M4 Thread SEM mounts made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Height: 1/4"
Electron Microscopy Sciences SEM Hitachi S-450 M4 Mount 3-Division 5/8", 1/4" height, Aluminum
Hitachi S-450 SEM mounts with M4 tapered hole and female thread. With 3 divisions. Made from ultra-pure aluminum with standard lathe finish.
Head: 5/8"
Height: 1/4"
Electron Microscopy Sciences Hitachi M4 SEM Cylinder Mount 1-1/4" surface, 1/4" height, Aluminum
Hitachi M4 SEM mounts are made from lathe finished ultra-pure aluminum.
Head: 1-1/4
Pin height: 1/4"
Electron Microscopy Sciences SEM Mount Hitachi M4 1" Surface 9-Division, 1/4" height, Aluminum
Hitachi cylinder mount has a M4 tapered hole with female thread. Made from lathe finished ultra-pure aluminum. M4 tapered hole.
Head: 1"
Height: 6 mm
Electron Microscopy Sciences Standard Pin SEM Stub 3-Division 1/2" Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
3-Division surface pin stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan are made from lathe finished ultra-pure aluminum.
Head: 1/2"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Standard Pin SEM Stub 3-Division 1/2" Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
3-Division surface pin stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan are made from lathe finished ultra-pure aluminum.
Head: 1/2"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Standard Pin SEM Stub Mini, 6.6 x 1.3 mm Head, 9.5 mm Pin, Aluminum
Mini SEM pin stub mount for Cambridge, Leica, ZEISS/LEO, FEI/Philips, CamScan, Tescan, ETEC and Amray. Made from lathe finished ultra-pure aluminum.
Head: 6.6 x 1.3 mm
Pin height: 3/8"
Electron Microscopy Sciences Standard Pin SEM Stub Slotted 18 mm Head with 8 mm Pin, Aluminum, 3.2 mm Pin diameter
Pin stub mount with slotted head for use with Cambridge, Leica, ZEISS/LEO, FEI/Philips, PHENOM, CamScan, and Tescan.
Head: 18 mm
Pin height: 8 mm
Electron Microscopy Sciences JEOL SEM Cylinder Mount 1-1/4" surface, 3/16" height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 1-1/4"
Height: 3/16"
Electron Microscopy Sciences Standard Pin SEM Stub 9-Division 25 mm Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
9 divisions surface min stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs. Mounts are made from lathe finished ultra-pure aluminum.
Head: 1"
Pin height: 9 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences Calibration Specimen 150-1D, SEM Pin
SPM calibration specimens are produced by holographic fabrication that assures high accuracy and precision. The standards provide easier testing of your SPM, improved accuracy of critical dimension measurements and accuracy of 0.5% (1 std. dev.). The pattern height of greater than 100nm provides excellent image contrast. There is uniform coverage of entire chip which allows for imaging anywhere on the chip. Has a nominal period (pitch) of 150 nm, one dimensional, fabricated on a transparent substrate (Aluminum lines on glass).
Mount: SEM Pin
Electron Microscopy Sciences Standard Pin SEM Stub 9-Division 25 mm Head with 9 mm Pin, Aluminum, 3.2 mm Pin diameter
9 divisions surface min stub mounts are for use with FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, Tescan and Camscan SEMs. Mounts are made from lathe finished ultra-pure aluminum.
Head: 1"
Pin height: 9 mm
Pin diameter: 3.2 mm
Grainger Toolholder Vise Stl CAT-V 50 Taper Tools
The HUOT Toolholder Vise For BT50 Taper 16T927 is a toolholder vise designed for BT50 taper toolholders. It has a clamping range of 0.39" to 1.57" and can hold tool shanks up to 1.57" in diameter. The vise body is made of ductile iron with a black oxide finish. It comes with an M10 mounting stud and nut. The vise can withstand up to 20,000 PSI hydraulic clamping force. This is a high quality toolholder vise for secure holding of BT style toolholders in milling machines.
Grainger Toolholder Vise Stl CAT-V 40 Taper Tools
The HUOT Toolholder Vise for CAT40 is a toolholder vise designed for CAT40 spindles. It has a clamping range of 0.5" to 1.5" and can hold tool shanks up to 1.5" in diameter. The vise body is made from ductile iron and has an opening stroke of 2.25". It comes with removable steel jaws and uses a screw clamping mechanism for rigid clamping. The vise can withstand speeds up to 4000 RPM. Overall dimensions are 4" x 3.25" x 4.5". It weighs approximately 9 lbs.
Electron Microscopy Sciences PS 100 XO Calibration Slide
All of the PS-XO series of Calibration Slides are made with Green Float Glass and have a bright Chrome Image High definition 100mm scale in 0.1mm divisions with extended 0.5mm, 1.0mm and 5.0mm lines. Series of dots and crosses, at 10mm intervals.