Microscope Lamps and Accessories
Electron Microscopy Sciences EMS Tungsten Loop Filament New, Zeiss, Tescan, Leo
Our Electron microscope Tungsten filaments have a rigid attachment of the filament wire to the post with no possiblity of waving and a minimum tip radius for a coherent beam. The base assembly of all of our new filaments are guaranteed to be rebuildable for the lifetime of the electron beam instrument. Inspected for consistent quality and performance before being shipped to you. Return the base and we will rebuild the filament.
Use: Zeiss Instruments, Tescan, Leo
Electron Microscopy Sciences Thin Sample Holder, 15x10 mm Stub
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For most AMRAY: 1/2" diameter, 1/8" dia. Pin (3.1mm) with split openings up to 1/4" (6.4mm), with 15mm (9/16") pin height
Electron Microscopy Sciences New Porton Graticle NG12, 16mm
The NG12 is particularly useful since the array of globes and circles are conveniently close to where the particles pass. At the end of each band of the sample the mechanical stage is traversed vertically to take in the next band until the whole sample has been covered.
Size: 16 mm
Electron Microscopy Sciences Thompson Graticle G23, 21mm
For counting particles in any of three areas of known size. The graticule is calibrated in the same manner as a normal eyepiece scale. The result is then used to calculate the area of any square.
Size: 21mm
Divisions: 10 mm, 7 mm and 4 mm squares
Electron Microscopy Sciences Thin Sample Holder, 15 mm Pin
Ideal for examination cross section of thin samples, such as wafers, multi-layer of capacitors, plastics, metals, etc. For ISI, JEOL, TOPCON: double set screw for a secure holding of the specimen during observation. 15mm(dia). X 10mm(H), 6.4mm split
Electron Microscopy Sciences Veco Thin and Thick Bars GE200, Copper Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter.
Material: Copper
Pitch: 125/145 µm
Hole: 80w/ Single slot 1000x500 µm
Bar: 45/65 µm
Electron Microscopy Sciences Thompson Graticle G23, 19mm
For counting particles in any of three areas of known size. The graticule is calibrated in the same manner as a normal eyepiece scale. The result is then used to calculate the area of any square.
Size: 19mm
Divisions: 10 mm, 7 mm and 4 mm squares
Electron Microscopy Sciences Gilder Thin Bar Hexagonal 600 mesh Nickel Grid
Very fine mesh grids have up to 2,000 lines/inch. There is an increasing need in TEM for support films, routinely carbon, as thin as 1.5 - 2.0 nm. The pitch (the distance from the center of one bar to the center of the next bar) dimension in all grids remains constant, allowing use as a lower magnification calibration aid.
Apart from one side being shiny, the other matt, there is a large asymmetrical mark in the rim which gives the identification of which side the specimen is on. Grids are 3.05 mm overall diameter; 2.05 mm mesh area diameter. With 5 µm bars more of the specimen can be viewed then in standard grids.
Grid: Nickel
Pitch: 42 µm
Hole: 37 µm
Bar: 5 µm
:
Electron Microscopy Sciences Poly-View for Negatives, 3- 1/4 x4"
Completely transparent polyethylene storage sheets fits all U.S. standard 3-ring binders: 8 1/4"x1 1/4". Convenient. Offers good protection for your valuable negatives and prints.
Size: 3-1/4 x 4"
Electron Microscopy Sciences Rotatrim Rolling Trimmer Mono-Rail Cutter, 16"
Designed for trimming papers and lightweight boards . Rotary blade is hardened Sheffield carbon steel, spring-tensioned and self-sharpening.
Size: 16"
Electron Microscopy Sciences Rotatrim Rolling Trimmer Mono-Rail Cutter, 26"
Designed for trimming papers and lightweight boards . Rotary blade is hardened Sheffield carbon steel, spring-tensioned and self-sharpening.
Size: 26"
Electron Microscopy Sciences Scale with Cross Line Microscope Graticle NE7, 16 mm, 10 mm with 0.1 mm spacing
Used as a horizontal and a vertical scale, they are especially useful when interested in measurement in different axis. Horizontal micrometer scale 10mm long with crosslines at 0.1mm spacing. Surface chrome image.
Size: 16 mm
Divisions: 10 mm with 0.1 mm spacing
Surface: Chrome image
Electron Microscopy Sciences Coates & Welter SEM Mount 3/4" Head, 3/8 " Pin diameter, Aluminum
Coates & Welter aluminum specimen mounts for scanning electron microscopes.
Head: 3/4"
Pin diameter: 3/8"
Electron Microscopy Sciences Coates & Welter SEM Mount 3/4" Head, 3/8 " Pin diameter, Aluminum
Coates & Welter aluminum specimen mounts for scanning electron microscopes.
Head: 3/4"
Pin diameter: 3/8"