Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Andwin Scientific PROTOSLO QUIETING SOLUTION
The Protoslo Quieting Solution is made to decelerate the movement of protozoa to keep them in focus and in the field of view while also keeping their characteristic motion. This clear, colorless solution is packaged and sold in a 15 mL dropper bottle.
IBI SCIENTIFIC 3P Large Mouse Restraint, 1.75" x 1.75"
Large Mouse Holder: 1.25-inch ID. IBI Scientific. Constructed of 1/4-inch clear cast acrylic, complete with adjustable nose restraint and tightening knob. Designed for mouse tail warming, injections, bleeds, and other injections.
Morrell Instrument Company Inc CFI PLAN ACHROMAT 50X / 0.90 /
Morrell is only authorized to sell the following products in New York, New Jersey, Pennsylvania, Maryland, Washington DC, Delaware, Virginia, West Virginia, Ohio, Indiana, and Kentucky.
Structure Probe Inc HOPG SPI Supplies Brand Grade SPI-2 10x10x1 mm Thick, Package of 1 Piece
Grade SPI-2. Very similar to ZYB(see below), this grade exhibits a mosaic angle as small as 0.8° +/- 0.2°. This grade is slightly less highly ordered than SPI-1 but is acceptable for most users. The lateral grain size can be up to 0.5 mm but can be as large as 1 mm. Note that this grade is slightly less "cleavable" than the 0.4° mosaic spread product, that is, SPI-1. Most workers find this grade more than suitable for all but the most critical samples, but priced low enough for routine use. Some users prefer this grade to SPI-1 because the cleavage steps are slightly wavy, so samples are held in place better (e.g. better adhesion). Dimensions = 10 mm x 10 mm x 1 mm
Ted Pella Inc PELCO SEM Storage box and holder for up to 18 of 12.7mm pin mounts
Versatile, cost effective SEM pin mount storage box and holder for pin mounts with a ø3.2mm (1/8") pin. Numbered 1-18 with the spacing designed to accommodate all types of pin mounts with a diameter from 6.4 to 50mm. Can hold 18 of 12.7mm pin mounts, 8 of 18mm pin mounts, 8 of 25mm pin mounts, 2 of 32 or 38 or 50mm pin mounts with space left for the smaller pin mounts. Maximum specimen height between mount surface and closed lid is 16mm (5/8"). Used for FEI/Philips, ZEISS/LEO/Leica, Cambridge CamScan, Tescan, Amray and ETEC SEMs. Box inside dimensions are: 4-5/8" x 2-2/4" x 1-5/16" (11.7 x 7.0 x 3.3cm).
Medicus Health Tube Agglutination Viewer, 3"L x 1"W x 0.375"H
Review microagglutination easily with this tube holder ∙Provides a consistent tube height so you don't have to re-adjust the microscope focus ∙Allows you to spin the tube in place to view all areas of the reaction ∙Provides unobstructed views of the cells ∙Holds any size tube in the U-channel ∙3"L x 1"W x 0.375"H