Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Teledyne Tekmar 3-STAGE NEEDLE USED WITH ATOM
3-stage needle, used with ATOMX purge and trap systems
Sigma Aldrich Fine Chemicals Biosciences Halocarbon oil 27 | 9002-83-9 | MFCD00147324 | 100 mL
Halocarbon oil 27 | 9002-83-9 | MFCD00147324 | 100 mL
Electron Microscopy Sciences Lacey Carbon Film with Ultrathin Carbon 3 nm thick on 200 mesh Copper Grid
The continuous ultrathin carbon film on lacey carbon allows for the thinnest support film that still has adequate strength to withstand electron microscope specimen preparation. The less than 3nm thick film lies across a carbon lacey film supported by a mesh grid. The size of the holes in the lacey film differ widely from batch to batch but are generally in the range of ¼ µm to 5µm, which gives the equivalent support of at least 6000 mesh grid.
Specimen material lying over the covered holes can be imaged in the TEM with practically no interference from the carbon film supporting it. This product is ideal for looking at nanotubes, virus particles and other small particulate material.
Grid: Copper
Ted Pella Inc 16120 SPECIMEN HOLDER W/BOX
Specimen Holder, Plastic Box, Standard, w/Pin Mount Specimen Holder, 1/EA
Electron Microscopy Sciences Carbon Support Film 5-6 nm thick on Square 400 mesh Copper Grid
A thin film of pure carbon. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Standard thickness is 5-6 nm.
Grid: Copper
Hach Company 3/4 Inch Combination pH/ORP Sensor, Convertible Style, Ryton Body Material, General Purpose Glass pH Electrode, No Temperature Compensation, 15 ft Cable
Ryton, Convertible Body Style, 4.5m Analog Cable, General Purpose Glass pH Electrode, No Temperature Compensation
Electron Microscopy Sciences Walton & Beckett Graticule G24, 19 mm, 5:1 ratio
The Walton and Beckett graticule is for counting fibrous dust (asbestos or glass fibers) and particularly where the majority of fibers to be counted are shorter than 5 microns. The circle is divided into four by two diametrical lines scaled in units of 5 and 3 microns respectively. 3 and 5 microns are the critical measurements of fiber lengths and diameters used in fiber counting. Walton and Beckett include shapes with an aspect ratio of 3:1 or 5:1 for comparing to fibers.
IMPORTANT NOTE: The circle on these Walton & Beckett graticules must represent 100 microns at the stage and each one must be manufactured to the individual instrument. 5:1 ratio is useful where the majority of fibers to be counted are shorter than 5 um.
Size: 19 mm
Electron Microscopy Sciences Cargille Immersion Oil Type HF 4 OZ
After years of development and field testing, we now have available two new PCB-Free Immersion Oils for Fluorescence Microscopy. A new Immersion Oil called HF which would provide low fluorescence and the correct optical properties.
Electron Microscopy Sciences Osmium Tetroxide, 20816-12-0, MFCD00011150, 1 g
Formula: OsO4, MW: 254.20, Crystalline, Highest Purity, 99.95%, Melting Range: 39.5-41.0°C, Boiling Point: 129.7°C.
Electron Microscopy Sciences Embra Grid with 2 x 1 mm slot, Aluminum
EMBRA electroformed grids combine a high open area with a rigid construction which allows for relatively easy handling. 3.05 mm diameter, 50 micron thick for oval hole grids.
I.D.: 2 x 1 mm
Material: Aluminum
Electron Microscopy Sciences Poly-View for Negatives, 3- 1/4 x4"
Completely transparent polyethylene storage sheets fits all U.S. standard 3-ring binders: 8 1/4"x1 1/4". Convenient. Offers good protection for your valuable negatives and prints.
Size: 3-1/4 x 4"
Electron Microscopy Sciences Poly-View for Negatives, 3- 1/4 x4"
Completely transparent polyethylene storage sheets fits all U.S. standard 3-ring binders: 8 1/4"x1 1/4". Convenient. Offers good protection for your valuable negatives and prints.
Size: 3-1/4 x 4"