Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Electron Microscopy Sciences TEM Round Grid Mats
White silicone rubber mats, with numbered compartments. Good for organizing grids. They will not slide or jump between compartments. Also ideal for staining grids. Easy to pick up grids without damaging forcep tips.
Electron Microscopy Sciences MAC Custom Block of 10 Microanalysis Standards
Pure metal and compounds standards are suitable for electron-beam energy dispersive or wavelength dispersive X-ray microanalysis systems. The standards are polished to a 0.25 micron diamond finish and carbon coated and are supplied with fully authenticated certificates of analyses and a location map for standard identification.
A Faraday Cup, for accurate specimen current measurements is available as an optional extra on all mounts. The standards are mounted in brass holders.
Electron Microscopy Sciences Veco Square Mesh Oyster Grid D75, Copper
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter.
Material: Copper
Pitch: 333 µm
Holes: 283 µm
Bar: 50 µm
Electron Microscopy Sciences Precision Light Guide Focusing Lens, OAL, diameter
Designed for use with microscopes, boroscopes, and endoscopes. Flexible and versatile, the light guides are ideal for a host of scientific, quality control and electronic applications. All of our light guides are backed by a full one-year warranty. Applications in stereochemistry, high/low contrast, optical comparators, IC/Semicondoctor etching and printing, automatic test equipment, profile projectors, and quality control.
Features fiber bundles that have been designed to provide brilliant specimen cross lightning from above and below. Only the finest quality optical class used. End fitting are polished stainless steel.
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 1/2" Head with 5 mm Pin, Aluminum, 3.1 mm Pin diameter
SEM stub specimen mount with tapered end pin and slotted head for use with LEO SEMs. Made from ultra-pure aluminum with a standard lathe finish.
Head: 1/2"
Pin height: 5 mm
Electron Microscopy Sciences Maxtaform 400 mesh, Nickel
Maxtaform grids with clean and smooth edges, firm support, and a large open area. 3 mm diameter, 0.75 mil thickness.
Grid: Nickel
Pitch: 63 µm
Hole: 43 µm
Bar: 20 µm
:
Hunt Optics And Imaging CX33 Upright Microscope Set Trinocular Head, Right-Hand Stage Controller
CX33RTFS2-1-2; CX33 Upright Microscope Set, Trinocular Head, Right-Hand Stage Controller, 4x, 10x, 40x Objectives, Eyepieces, LED Illumination
Electron Microscopy Sciences Formvar/Carbon Film 10 nm/1 nm thick on Square 300 mesh Copper Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. All of our coated grids are optically checked followed by batch testing in the EM. Packed in grid storage box. NOTE: All of our film is laid on the shiny side of the grid. Formvar is approximately 10 nm thick with 1 nm of carbon.
Grid: Copper
Electron Microscopy Sciences Gilder Finder Grid F1, 200 mesh Nickel Grid
Used to identify specific areas of mesh by an alphabetical or numerical code built into the mesh. 3.05 mm diameter, 0.7 mil (18 um) thickness. Series has thick bars dividing regions into 6 thin bar areas identified by a numeric system.
Grid: Nickel
Pitch: 125 µm
Hole: 90-100 µm
Bar: 35-12 µm
Electron Microscopy Sciences Gilder Finder Grid F1, 200 mesh Gold Grid
Used to identify specific areas of mesh by an alphabetical or numerical code built into the mesh. 3.05 mm diameter, 0.7 mil (18 um) thickness. Series has thick bars dividing regions into 6 thin bar areas identified by a numeric system.
Grid: Gold
Pitch: 125 µm
Hole: 90-100 µm
Bar: 35-12 µm
Electron Microscopy Sciences Gilder Thin Bar Hexagonal 300 mesh Nickel Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Nickel
Pitch: 83 µm
Hole: 73 µm
Bar: 10 µm
Electron Microscopy Sciences Gilder Thin Bar Hexagonal 200 mesh Copper Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Copper
Pitch: 125 µm
Hole: 113 µm
Bar: 12 µm
Electron Microscopy Sciences SEM Finder Grid SEMF2, Nickel
Designed to aid in the identification and localization of SEM specimens when placed on standard SEM stubs. Larger cells identified 1-57 & subdivided into 4. 228 identifiable cells.
Material: Nickel
Diameter: 10 mm
Thickness: ~50 µm
Electron Microscopy Sciences SEM Finder Grid SEMF1, Nickel
Designed to aid in the identification and localization of SEM specimens when placed on standard SEM stubs. Four quadrant markers tapered towards center. 100 radial sectors.
Material: Nickel
Diameter: 10 mm
Thickness: ~50 µm
Electron Microscopy Sciences SEM Finder Grid SEMF2, Copper
Designed to aid in the identification and localization of SEM specimens when placed on standard SEM stubs. Larger cells identified 1-57 & subdivided into 4. 228 identifiable cells.
Material: Copper
Diameter: 10 mm
Thickness: ~50 µm