Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Chemglass Life Sciences Clamp, Chain, Small
Clamp, Chain, Small. Small size chain clamps to accommodate up to 6 1/2” (170mm) O.D. Quick slip-on chain connection has large, easy-to-turn adjusting knob. Extension arm has a length of 6” (150mm). Grip is vinyl coated.
Chemglass Life Sciences Clamp Holder, Heavy Duty, Large
Clamp Holder, Heavy Duty, Large. Heavy duty holder features greater grip strength and the ability to hold flat panels or shelves up to 3/4” (19mm) thick. Large thumb screws allow easy adjusting. Maximum grip size is 3/4” (19mm).
Chemglass Life Sciences 120mL HW Pressure Vessel, Cylindrical, #15 Internal Thread, Complete, 38mm O.D. x 215mm Length, Bushing Size/15
120mL Heavy Wall Pressure Vessel, Cylindrical, #15 Internal Thread, Complete, 38mm O.D. x 215mm Length, Bushing Size/15. Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The design allows hand tightening/loosening for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Supplied complete with vessel, PTFE bushing & Viton o-ring. Optional Perfluoro o-ring has the chemical resistance & service temperature range similar to Kalrez 4079. See CG-362, CG-364, and CG-366 for optional PTFE Bushings.IMPORTANT NOTICE: ALL CHEMGLASS PRESSURE VESSELS ARE TESTED AT 150 PSI, OR APPROX TWO AND ONE-HALF TIMES THEIR RECOMMENDED WORKING PRESSURE. HOWEVER, CHEMGLASS DOES NOT GUARANTEE THE VESSEL FROM BREAKING UNDER PRESSURE, DUE TO THE NATURE OF MATERIAL AND CONDITIONS BEYOND OUR CONTROL. CHEMGLASS RECOMMENDS THE USE OF SAFETY SHIELDS AND/OR OTHER SAFETY EQUIPMENT.
Chemglass Life Sciences 150mL HW Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 63.5mm O.D. x 117mm Length, Bushing Size/25
150mL Heavy Wall Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 63.5mm O.D. x 117mm Length, Bushing Size/25. Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The design allows hand tightening/loosening for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Supplied complete with vessel, PTFE bushing & Viton o-ring. Optional Perfluoro o-ring has the chemical resistance & service temperature range similar to Kalrez 4079. See CG-362, CG-364, and CG-366 for optional PTFE Bushings.IMPORTANT NOTICE: ALL CHEMGLASS PRESSURE VESSELS ARE TESTED AT 150 PSI, OR APPROX TWO AND ONE-HALF TIMES THEIR RECOMMENDED WORKING PRESSURE. HOWEVER, CHEMGLASS DOES NOT GUARANTEE THE VESSEL FROM BREAKING UNDER PRESSURE, DUE TO THE NATURE OF MATERIAL AND CONDITIONS BEYOND OUR CONTROL. CHEMGLASS RECOMMENDS THE USE OF SAFETY SHIELDS AND/OR OTHER SAFETY EQUIPMENT.
Chemglass Life Sciences Vacuum Trap, 1000mL Capacity, Fits 4300mL Dewar Flask, 340mm OAH x 130mm Width, Complete
Vacuum Trap, 1000mL Capacity, Fits 4300mL Dewar Flask, 340mm OAH x 130mm Width, Complete. Trap is designed for large volume solvent removal by vacuum. The 40/35 standard taper joint connects trap body with stopper. Connections are 1/2in O.D. Trap is designed to fit into standard CG-1593 through CG-1595 Dewar flasks.
Chemglass Life Sciences Vacuum Trap, Complete, 45mm Body OD x 250mm Overall Length, 16mm OD Side and Inner Tubes, 40/50 Jt.
Vacuum Trap, Complete, 45mm Body OD x 250mm Overall Length, 16mm OD Side and Inner Tubes, 40/50 Jt. Similar to CG-4514, but with the top inlet tube bent at a 90º angle.
Chemglass Life Sciences 1L Reaction Vessel, Jacketed, 100mm Schott O-Ring Flange, GL-14 Inlet/Outlet, CG-911-A-10 Drain Valve
1000mL Reaction Vessel, Jacketed, 100mm Schott O-Ring Flange, GL-14 Inlet/Outlet, CG-911-A-10 Drain Valve. Similar to CG1924, but with our CG911A 0-14mm sidearm valve. All valves are designed to seal flush with the bottom of the flask avoiding the dead space normally associated with stopcock drains. This feature permits total mixing & draining of the contents of the reactor. The CG510 is recommended for solution based reactions while the CG911A and CG511 are recommended for reactions containing solids. Reaction vessel is constructed with a flange having a groove formed in the sealing surface of the flange. Flange is also ground to permit a greased seal with any lids CG1940 through CG1946. Supplied complete with two polypropylene hose connections and two screw caps(Polypropylene hose connections with a Viton rubber seal for working temperatures up to max +110¿C.) For clamp see CG141 or CG141T. For o-ring see CG147.
Chemglass Life Sciences Vacuum Trap, 45mm Body OD x 350mm Body Length, 25mm OD Side and Inner Tubes
Vacuum Trap, 45mm Body OD x 350mm Body Length, 25mm OD Side and Inner Tubes. One piece trap used in the removal of undesired vapors in the vacuum system by condensation. Vacuum Trap, 45mm Body OD x 350mm Body Length, 25mm OD Side and Inner Tubes.
Chemglass Life Sciences Condenser, 45/50 Joint, Reflux, 315 x 100mm
Condenser, 45/50 Joint, Reflux, 315 x 100mm. Compact high efficiency reflux condenser employs a double wall thimble shape bulb sealed into the outer jacket. Serrated hose connections for water connection extend through the outer bulb and have an O.D. of 10mm at the middle serration. While the overall height of this condenser is only 210-215mm, it has the efficiency of a standard 400mm Liebig or West condenser.
Chemglass Life Sciences Cold Finger Condenser Only
Cold Finger Condenser Only. Replacement Part for CG303001 micro sublimer.
Chemglass Life Sciences Trap Arm, Style 'B'
Trap Arm, Style 'B'. Replacement part for CG452701 vacuum trap.
Chemglass Life Sciences Vacuum Trap, Body Only
Vacuum Trap, Body Only. Replacement part for CG452701 vacuum trap.
Ace Glass, Inc. 24/40 30.5cm distillation column
30.5cm Hemple distillation column with 24/40 standard taper joints, and indentations to support packing. Length in centimeters refers to the length from the packing support to the bottom of the outer ground joint.