Mills
Grainger Drill Mill 3/8 Carbide Bright
The Micro 100 Drill Mill Carbide is a high performance carbide drill bit designed for milling and drilling in steel, cast iron, aluminum, and other metals. It has a TiAlN coating for increased tool life and heat resistance. The drill bit has a 135 degree split point tip to reduce walking and wandering. It is available in diameters ranging from 1/8 inch to 1/2 inch, and in stub, jobber, and screw lengths. The Micro 100 drill bits feature variable helix flutes to efficiently clear chips. They are manufactured in the USA from micrograin carbide for strength and durability.
Fritsch Milling And Sizing Inc Support Walls P-1 Cl Size 2 Stainless Steel
Lateral support walls made of stainless steel for FRITSCH Jaw Crusher PULVERISETTE 1 classic line Size 2.
General material specification:Material: stainless steel - 1.4571
Abrasion resistance: fairly good
Suitable for: medium-hard, brittle samples
Fritsch Milling And Sizing Inc Movable Jaw P-1 Cl Size 1 Hardmetal Tungsten Carbide
Movable crushing jaw, hardmetal tungsten carbide for PULVERISETTE 1 classic line, Size 1 for the comminution of hard, abrasive samples
General material specifications:
Material: hardmetal tungsten carbide - GC40 - WC
Abrasion resistance: extremely good
Suitable for: hard, abrasive samples
Fritsch Milling And Sizing Inc Grinding Bowl 80 Ml Cpl. Hardened,Stainless Steel P-7Pl
Grinding bowl 80 ml cpl. hardened,stainless steel P-7 pl with lid, seal ring and label
Grinding bowl volume: 80 ml
Useful capacity: 10 … 30 ml
Weight net: 1.150 kg
General material specification:
Material: hardened, stainless steel - Fe-Cr
Abrasion resistance: good
Suitable for: hard, medium-hard, brittle samples
All grinding bowls for the Planetary Micro Mill PULVERISETTE 7 premium line are delivered - as a standard – with a silicone seal ring. Due to this seal ring, the lid and grinding bowl are so tightly sealed that even grinding in suspension is possible absolutely problem-free.
When grinding in solvents or dry grinding of slightly caustic samples, we recommend our seal rings made of Viton (Article No. 84.0341.15) because they have a much higher chemical resistance.
Grainger Ball End Mill Single End 0.30mm Carbide
The Grainger Approved Ball End Mill Single End is a high-speed steel end mill with a ball end for milling contoured surfaces. It has a 1/4" shank diameter, 1/2" overall length, and a 1/4" cutting diameter. The end mill has a TiN coating for increased hardness and lubricity. It is designed for general purpose milling in most material types up to 45 HRC hardness. The end mill provides accurate results for profiling, contouring, slotting, and pocketing applications.
Grainger Drill Mill 1/2 Carbide AlTiN
The Grainger 16T596 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a minimum height of 10-3/4 inches and a maximum height of 16-1/4 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It is designed for portability with its compact size and enclosed hydraulic system. The jack's lift range makes it suitable for use with light and medium duty automotive lifting applications. Its maximum load capacity is 32,000 lbs.
Grainger Sq. End Mill Single End Carb 3/4
The Grainger 14G036 is a Westward 3/8-inch drive deep impact socket set. This 12-piece set includes sizes ranging from 10mm to 19mm, providing a wide range of metric sockets for impact wrench use. The sockets are made from chrome vanadium steel for durability and have a black phosphate finish to resist corrosion. According to the product details, these impact sockets are designed for use with pneumatic tools up to 1,000 ft-lbs of torque. The set comes packaged in a molded case for convenient storage and organization. With their durable construction and useful range of sizes, these Westward impact sockets are a solid choice for automotive and industrial applications requiring high torque.
Grainger Thread Mill Carbide
The Micro 100 16R741 is a 1/4" diameter, 3/4" long, 4 flute carbide thread mill. It has a right hand spiral flute design and can cut 60 degree internal threads in steel, stainless steel, cast iron, aluminum, and other materials. The thread mill has AlTiN nano coating for increased tool life and lubricity. It is capable of cutting unified thread sizes from 4-56 to 1/4-20 as well as metric thread sizes from M1x0.25 to M6x1. Recommended speeds are 70 to 120 SFM. Overall, this Micro 100 thread mill provides an efficient method of cutting internal threads in metals.
Grainger Cor Rad End Mill 1/2 Carb 0.0200 rad
The Corner Radius End Mill from Grainger is a 4-flute carbide end mill designed for corner radiusing and contouring in a variety of materials. It features a 30 degree helix angle and right-hand cut. The end mill has a neck relief to reduce chatter and improve finish. It is available in multiple corner radius sizes from 1/64" to 1/4", and shank diameters of 1/8", 3/16", 1/4", 5/16", 3/8", and 1/2". The end mill is made in the USA out of micrograin carbide for wear resistance and heat tolerance. Its applications include die/mold work, profiling, slotting, and contouring in materials like tool steels, hardened steels, titanium alloys, nickel alloys, and stainless.
World Precision Instrument #6 Carbide Ball Mill
This line-powered micro drill will make easy work of grinding, finishing, cutting and drilling bone, teeth and other material. The high-torque 35,000 rpm (maximum) motor is quiet and has minimal vibration which reduces wear on the motor and provides greater comfort for you. It also features a forward and reverse switch, “E Type” handpiece and handpiece holder. The handpiece has a removable nose cone that can be cleaned and sterilized. It accepts 3/32” and 2.33mm bur shanks. Unlike battery-powered drills, this unit maintains consistent power for the duration of use. The wide range of speeds allows you to control the amount of heat generation.
Alkali Scientific Beadblaster 96 Ball Mill Homog
The BeadBlaster96 is an extremely versatile bead mill homogenizer that has applications in a variety of areas including biological research environmental testing and industrial settings Adapters are available for microplates microtubes and 15/50ml tubes Grinding jars and balls in a variety of materials are available Wet homogenization dry grinding and cryogrinding can all be performed with the BeadBlaster96 The arced motion of the sample holders and powerful motor allow samples to be processed quickly and efficiently All parameters are digitally controlled through the large touch screen and 9 programs can be stored in memory The safety cover lifts up for easy access to the sample holders and automatically locks during operation The wrap-around design of the clear acrylic lid allows for visualization during homogenization Wet dry or cryogrinding Accepts a variety of tubes plates and jars Large digital touch screen control panel See-though safety lid