General Spectrometer Accessories
Perkin Elmer US LLC Silicone Torch O-Ring, 9.25 mm I.D. for Optima 3x00 XL/3x00 DV/3000 SCX/4300/5300/7300 V
Two silicone 9.25 mm I.D. O-rings are included in the Complete O-ring Kit for Optima 4300V/5300V/7300V (N0770916).
Perkin Elmer US LLC Sample Disk Holder for Spotlight Systems
The Sample Disk Holder is made of an aluminum alloy and accommodates up to 3 sampling discs, 13 mm in diameter. It is 76 (L) x 25 (W) x 3 (H) mm and sits on the sample stage of PerkinElmer's Spotlight systems. With this part number, you can order a replacement or spare holder.
Perkin Elmer US LLC Quartz Injector, 1.2 mm I.D. - Entire Length of Tube, Optima 8x00
This Quartz Injector is for use with Optima 8x00 ICP-OES series instruments. They are designed for organic solvents and non-HF matrices.
Perkin Elmer US LLC Baffled Quartz Cyclonic Spray Chamber with PFA Torch Adapter for Avio 200
The Baffled Cyclonic Spray Chamber features a central transfer tube which acts as a secondary particle separator, helping to separate larger aerosol particles from the sample. This reduces solvent load in the plasma without compromising detection limits.
Perkin Elmer US LLC Drain Tubing for S10/AS-93plus
The tubing has a 6.4 mm inner diameter, a 1.6 mm wall thickness and is clear in color. Note that the tubing is part of the Rinsing Kit B3140236.
Glass Expansion OpalMist DC Nebulizer 2mL/min, Includes NFT-075 UniFit Connector with 0.75mm ID x 1.3mm OD x 700mm long tubing (1 piece), and 70-803-1070 Gas Fitting with Ratchet Nebulizer connector
OpalMist DC Nebulizer 2.0mL/min, includes UniFit Connector with 0.75mm ID x 1.3mm OD x 700mm long tubing (1 pc) & DC Gas Fitting Type 21 with ratchet connector (1 pc). Compatible with Perkin Elmer Optima ICP-OES.Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 2.0mL/min. Recommended not to exceed optimum 2.0mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. OpalMist is made from high purity PFA resulting in the lowest background & exceptional resistance to HF. Tolerates up to 15% TDS & 75um particulates.Replacement parts include P/Ns NC0277960 & 70-803-1070.Recommended nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Platinum Alloy Nebulizer Complete Assembly for AAnalyst
A complete Stainless Steel body with Platinum Alloy nebulizer, Platinum/Iridium needle, Tantalum venturi, and Kalrez o-rings. It is preferred for general applications with acid concentrations greater than 5%, providing exceptional performance and durability. This assembly includes: O-Ring for Insert/Venturi, Qty. 2 (09902005) Nebulizer Insert, Qty. 1 (03031812) Nebulizer Body, Qty. 1 (03030353) Venturi for Platinum Alloy Nebulizer, Qty. 1 (03033124) Front End Cap, Qty. 1 (03031808) O-Ring for Front End Cap, Qty. 1 (09902239) Fine Adjustment Nut, Qty. 1 (03031460) Locking Ring, Qty. 1 (03031456) Washer, Qty. 1 (03031802) Capillary Assembly for Platinum Alloy Nebulizer, Qty. 1 (03030433) O-Ring for Capillary Assembly, Qty. 1 (09902102) Spring, Qty. 1 (03031806) Nebulizer Grease, Qty.1 (03030405) This nebulizer is compatible with the PerkinElmer AAnalyst 200/400*, AAnalyst100/300/700/800, and Models 5100PC/5000/3300/3110/3100 AA instruments. Note: AAnalyst 200/400 requires an end cap as
Med Vet International Dynarex Nasal Oxygen Cannula Flared Tip, 7' (2.1 M) Crush Resistant, Adult/Universal Connector, 50/Case
Dynarex Resp-O2 Nasal Oxygen Cannulas with Flared Tips are designed to efficiently deliver supplemental oxygen to respiratory patients. The cannulas are available with either Standard or Universal connectors and feature light green oxygen supply tubing, designed to help improve tube visibility. Flared-tip nasal prongs help ensure a secure fit Crush-resistant, star lumen oxygen supply tubing Individually wrapped Not made with natural rubber latex or DEHP
Glass Expansion DuraMist DC Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), and 70-803-1049 Gas Fitting with Ratchet Nebulizer connector
DuraMist DC Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) and DC Gas Fitting Type 22 with ratchet connector (1 pc). Compatible with Perkin Elmer Elan/NexION 300/350.Optimum nebulizer gas flow rate is 1.0L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 1.0L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, it tolerates up to 5% HF.Replacement parts include P/Ns 502702959 and 502703069.Recommend nebulizer maintenance tools are Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Contour Flared End Solva Pump Tube 3 tag, 95mm spacing, 1.52mm ID, Yellow/Blue, 95mm (PKT 6)
Contour Flared End Solva Flex Pump Tube 3tag, 95mm spacing, 1.52mm ID Yellow/Blue (PKT 6).Tag Colors: Yellow/BlueID mm: 1.52Wall Thickness mm: 0.86OD mm: 3.24Overall Length: 455mm (95mm spacing between tags)Number of Tubes Per Pack: 6Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion Solva Flex Pump Tube 3 tag, 95mm spacing, 0.64mm ID, Orange/White (PKT 12)
Solva Flex Pump Tube 3tag, 95mm spacing, 0.64mm ID Orange/White (PKT 12).Tag Colors: Orange/WhiteID mm: 0.64Wall Thickness mm: 0.86OD mm: 2.36Overall Length: 455mm (95mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon 4040 or equivalent.Special Properties: Special tubing for hydrocarbons, petroleum products and distillates.Chemical Compatibility: Ideal for gasoline, kerosene, heating oils, cutting liquids and coolants based on glycols.Limitations: Not recommended for strong acids and alkalis, foodstuffs, beverages and medicines. Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Perkin Elmer US LLC Chemifold Mixing Manifold for Glass Gas-Liquid Separator
This Chemifold Mixing Manifold is compatible with glass gas-liquid separators of flow injection systems such as the FIAS and FIMS instruments.
Glass Expansion DuraMist Nebulizer 0.4mL/min, Includes NFT-16-50 UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 piece), EL-1 EzyLok Connector Kit, and 70-803-0911 Ratchet EzyLok Connector.
DuraMist U-Series Nebulizer 0.4mL/min, includes UniFit Connector with 0.50mm ID x 1.6mm OD x 700mm long tubing (1 pc) & EzyLok Connector (1 pc).Optimum nebulizer gas flow rate is 0.7L/min & sample flow rate is 0.4mL/min. Recommended not to exceed optimum 0.4mL/min sample flow rate; however, lower gas & sample flow rates are OK. The backpressure should read ~40 psi at 0.7L/min gas flow rate. DuraMist is an economical inert nebulizer for high-precision analysis & the highest tolerance to TDS, up to 30%. Made from PEEK, tolerates up to 5% HF.Replacement parts include P/N 502702959, EL-1 & 501907289.Recommend nebulizer maintenance tools, Fluka RBS25 (P/N NC9000117) & Eluo Nebulizer Cleaning Tool (P/N 501907353). When nebulizer is not in use, best to store in the provided hard plastic case.Consider upgrading to our new Direct Connect (DC) DuraMist to take advantage of the cost-effective design improvements.Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
Glass Expansion PVC Pump Tube 3tag, 72mm spacing, 0.19mm ID, Orange/Red (PKT 12)
PVC Pump Tube 3tag, 72mm spacing, 0.19mm ID Orange/Red (PKT 12).Tag Colors: Orange/RedID mm: 0.19Wall Thickness mm: 0.91OD mm: 2.01Overall Length: 455mm (72mm spacing between tags)Number of Tubes Per Pack: 12Physical Properties: Thermoplastic, PVC based material with plasticizerMaterial: Made from Tygon R3603/R3607 or equivalent.Special Properties: Inexpensive all-around tubing for general laboratory applicationsChemical Compatibility: Excellent for aqueous solutions of the following acids and concentrations, up to 35% Nitric Acid, up to 37% Hydrochloric Acid, up to 25% Hydrofluoric Acid, up to 30% Hydrogen Peroxide.Limitations: Potential leaching of plasticizersGlass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001