Slide Mounting Media
Electron Microscopy Sciences Epo-Fix Embedding Kit Small Clear
A two component epoxy resin, characterized by negligible shrinkage during curing and good mechanical properties in its hardened state. It is particularly suited for embedding hard samples of complicated shape and for vacuum impregnation. Samples such as paper, silicon, ceramics, metals, wafers, and chips are suitable to be used with Epo-Fix. Kit consists of: 1 kg resin, 120 g hardener, 15 cups, 15 stirrers, 1 x 5 mL and 20 mL syringes.
Electron Microscopy Sciences EMS-Mount 30 ML
EMS-Mount is a non-permanent, low viscosity an aqueous mounting medium designed for mounting of tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents. This mounting medium preserves Fast red, Aminoethylycarbazole (AEC), BCIP/NBT, BCIP/INT chromogens and is also compatible with counterstain like Hematoxylin and Nuclear fast red (NFR). It is also suitable for chromogens like DAB and DAB with nickel and cobalt. (It is not compatible with H and E staining).
Application: Mounting of chromogens that cannot be dehydrated with organic solvents. Ready to use. Storage at 2-8 degree C is recommended.
Electron Microscopy Sciences EMS Conductive Gold-Paste Extender 25 ML
Extender for conductive gold paste adhesive used in scanning electron microscopy.
Electron Microscopy Sciences Citifluor™ Mountant Solution PVP-1, Glycerol Free, Hardening 25 ML
Citifluor mounting medium for immunofluorescence is designed to reduce the fading of the fluorescence of dyes used for labeling biological specimens. In the technique of fluorescence microscopy, the fluorescence is stimulated by high intensity UV and/or visible light. Absorption of the light populates an excited state of the dye (usually a singlet state) and this leads to fluorescence. However, the excited state of the dye may undergo chemical reaction, which leads to destruction as evidenced by the fading of the fluorescence and consequent loss of the image. Aqueous solution of poly(vinyl pyrrolidone).
Material: Glycerol Free
Type: Hardening
Electron Microscopy Sciences EMS Glycerol Mounting Medium 100 ML
This aqueous mounting medium made with glycerol is for preserving fluorescence of tissue and cell smears. It is excellent for preserving thick sections that can not be mounted with mounting medium or fresh frozen tissues containing lipids, e.g. brain tissue.
This mounting medium is also useful for immunofluorescence. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Cy dyes, Alexa fluoro 488, Alexa fluoro 594, Green fluorescent protein (GFP), tetramethyly rhodamine and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. This medium does not contain phenylenediamine, which destroys immunofluorescence of Cy dyes.
Not recommended for phycoethyrin (PE), phycocyanin (PC) and allophycocyanin (APC).
Reagent: Ready to use mounting medium for IHC and immunofluorescence (IF).
Refractive Index: 1.472. Storage at temperature of 2-8 degree C is recommended. Protect from light.
Ibidi USA ibidi Mounting Medium With DAPI, 15ml
DAPI counterstaining and mounting combined in one single step. Ready-to-use in immunofluorescence assays using widefield fluorescence and confocal microscopy. Dropper bottle for exact dispensing into channels or open wells. Brilliant fluorescence signals with low background fluorescence. Concentration/Volume 15mL
Electron Microscopy Sciences Fluoro-Gel Mounting Medium with TES Buffer 20 ML
Fluoro-Gel is a water based mounting medium designed for the permanent mounting of fluorescent stained tissues, which may either be damaged or soluble in organic solvents, such as xylene or toluene. This unique formula prevents rapid photo-bleaching of FITC, Texas Red, AMCA, Cy2, Cy3, Cy5, Alexa Fluoro 488, Alexa Fluoro 594, Green Fluorescent Protein (GFP), Tetramethylyrhodamine, Redox, Phycoerythrin (RP-E), Phyocyanin (PC), and Allophycocyanin (APC).
The fluorescence is retained during prolonged storage at 4 degree C in the dark. Application: Immunofluorescence, confocal microscope.
Electron Microscopy Sciences UV Mounting Medium 100 ML
Mounting medium that is designed to match the refractive index of JB-4 embedded sections. Cures within 2 minutes when exposed to long wave UV light (365nm) when applied to moist sections. Sections are mounted after last staining water rinse. Slides must be coverslipped.
Biotium EVERBRITE MOUNTING MEDIUM
EverBrite™ mounting medium is a revolutionary antifade mounting medium optimally formulated for preserving fluorescence of Biotium's CF™ dyes and other fluorochromes. Unlike VectaShield®, EverBrite™ is compatible with cyanine-based fluorophores like Cy® dyes. The mounting medium permits immediate imaging of slides and tissues after sealing edges of coverslips with nail polish or Biotium’s CoverGrip™ Coverslip Sealant. After mounting, slides can be stored at 4°C for a year or longer. EverBrite™ provides a high level of protection from photobleaching over a wide range of fluorescence wavelengths. EverBrite™ Mounting Medium has a refractive index of 1.46, which is well-matched to the refractive indices of coverslip glass and immersion oil (1.5). 10 mL. VectaShield is a registered trademark of Vector Laboratories. Cy Dye is a registered trademark of GE Healthcare.
Electron Microscopy Sciences CytoSeal™ Mounting Medium 280 Mounting Medium 4 OZ
CytoSeal 60 and 280 are toluene-based mounting mediumformulated from acrylic resins that will not crack or discolor with age. An antioxidant has been added to the formulation to inhibit fading or yellowing of stained specimens. It will not become brittle and crack, nor will it discolor or yellow with age. CytoSeal can be dissolved in toluene or xylene. High-viscosity medium for applications where minimal spreading is desired or applications without a cover glass
Electron Microscopy Sciences EMS-Mount 100 ML
EMS-Mount is a non-permanent, low viscosity an aqueous mounting medium designed for mounting of tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents. This mounting medium preserves Fast red, Aminoethylycarbazole (AEC), BCIP/NBT, BCIP/INT chromogens and is also compatible with counterstain like Hematoxylin and Nuclear fast red (NFR). It is also suitable for chromogens like DAB and DAB with nickel and cobalt. (It is not compatible with H and E staining).
Application: Mounting of chromogens that cannot be dehydrated with organic solvents. Ready to use. Storage at 2-8 degree C is recommended.
Electron Microscopy Sciences Omnimount™ solvent, 100ml, Compatible with HistoClear II
Specially developed mounting medium is compatible with National Diagnostic clearing agents, HistoClear II. Omnimount combines outstanding optical characteristics with low fluororescence and exceptional durability. Omnimount is a truly universal mounting medium compatible with all common clearing agents: xylene, toluene, limonene, and petroleum derived products.
The Omnimount solvent has a higher flash point and a lower toxicity than xylene based mountants, so Omnimount provides both a safer work environment and reduce shipping costs.
Electron Microscopy Sciences Fluoro Gel with Dabco 1000 ML
Fluoro Gel with antifading agent 1, 4-Diazobicyclo-(2,2,2-octane (DABCO) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears. This unique formula prevents rapid photobleaching of FITC, Texas Red, AMCA, Alexa fluoro 488, Alexa fluoro 594, Cy dyes, tetramethyly rhodamine, and Redox. The fluorescence is retained during prolonged storage at 4 degree C in the dark. Use for immunofluorescence and confocal microscopy. Storage at 2-8 degree C is recommended
Enzo Life Sciences Antifade mounting medium with DAPI (hardset) (10ml)
Antifade mounting medium with DAPI (hardset) is an antifade reagent that causes little or no quenching. Use of the mounting medium significantly extends the photobleaching half-life of the fluorescent stain. The inclusion of DAPI allows for staining of the nucleus. Long Term Storage: -80°C. Applications: IF, IHC, Fluorescence microscopy, Fluorescent detection .