Embedding Accessories
Electron Microscopy Sciences Micro-Bed Embedding Resin 500 ML
Micro-Bed resin is a water-soluble resin, a mixture of acrylate and polyester resins. Universal embedding medium that may be used for light or electron microscopy.
Due to its non-crosslinking characteristics, its hydrophilic nature, and roughness of its section surface, it is excellent in preserving tissue structure, offers good results in immunolabeling, and stands up well to conventional stains.
In LM, tissues were stained with conventional histological stains (e.g.,hematoxylin-eosin) and embedded in Micro-Bed: results comparable with those provided on paraffin embedded tissues. Polychrome silver-based and cytochemical stains (e.g.,PAS) were also feasible. In TEM, images as good as those obtained with similar acrylic resins, (e.g., Lowicryl K4M), were obtained.
Supplied as a single component-ready to use pre-mixed resin. Micro-Bed can be polymerized by heat (55-65°C) or UV (365nm) at -10 to 20°C for 72 hours.
Electron Microscopy Sciences Paraffin TMA ArrayMold G, Blue, 3.5 mm diameter, 24 cores per mold Capacity
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) w/ less time while maintaining excellent results. Process up to 150 specimens onto one single slide w/ very little time consuming, minimal technical training. The DVD instruction is accompanying w/ each kit, will step by step guide you to perform through the entire TMAs process. Arraymolds allow pathologist or researcher to view many different samples on the same single slide. Helpful in finding IHC markers for control or quality assurance from hundreds of samples. Staining markers will be more consistent when hundreds of samples are on one slide. Used less costly antibody.Arraymold kit is small enough to be stored in a drawer.Rubber arraymold can be reused many times without losing its flexibility. Generates 3.5 mm diameter sample core, 24 cores per mold. Kit: 10 Disposable 4mm sterile dermal needles, 2 Stylets, 1 Brass Plate, 1 4mm reusable rubber Arraymold, DVD.Color: BlueDiameter: 3.5 mm
Electron Microscopy Sciences Biopsy Paper Bags, 45 mm x 75 mm, 500/pk
These bags are made from porous paper which provides maximum tissue safety during processing. They permit proper fluid exchange and drainage. To Use simply introduce the specimen into the bag and fold it enclosing the cassette or capsule. You are now ready to process as usual.
Electron Microscopy Sciences SupaMega Stainless Steel Base Molds, 60x45x15 mm, 15 mm height
The SupaMega range of stainless steel base molds have extra deep side walls allowing wax to be decanted into the cassettes during embedding without the risk of the usual leakage of wax. The smaller faced mold also saves wax on medium sized blocks too large to fit into standard cassettes negating the use of full size molds.
Size: 60 x 45 mm
Height: 15 mm
Electron Microscopy Sciences Disposable Base Mold, 37 x 24 mm, 5 mm height
Our Disposable Base Mold is designed to fit all existing cassettes. Because our base molds are disposable you save time on cleaning and storing and they offer you less exposure to hazardous chemicals.
Size: 37 x 24 mm
Height: 5 mm
Electron Microscopy Sciences Paraffin TMA ArrayMold E, Blue, 1.5 mm diameter, 72 cores per mold Capacity
The Arraymold is the simple tool for laboratories to perform Paraffin tissue microarrays (TMAs) w/ less time while maintaining excellent results. Process up to 150 specimens onto one single slide w/ very little time consuming, minimal technical training. The DVD instruction is accompanying w/ each kit, will step by step guide you to perform through the entire TMAs process. Arraymolds allow pathologist or researcher to view many different samples on the same single slide. Helpful in finding IHC markers for control or quality assurance from hundreds of samples. Staining markers will be more consistent when hundreds of samples are on one slide. Used less costly antibody.Arraymold kit is small enough to be stored in a drawer.Rubber arraymold can be reused many times without losing its flexibility. Generates 1.5 mm diameter sample core, 72 cores per mold. Kit: 10 Disposable 2mm sterile dermal needles, 2 Stylets, 1 Brass Plate, 1 1.5mm reusable rubber Arraymold, DVD.Color: Blue
Electron Microscopy Sciences Peel Away Disposable Embedding Mold Rectangular, 22 x 40 mm
Peel Away Disposable Embedding Molds are used for plastic or paraffin embedding. No block trimming needed. Inside fingers hold ID slip which becomes embedded in the block for positive permanent identification.
Size: 22 x 40 mm
Electron Microscopy Sciences Nylon Biopsy Bag, 45 x 74 mm
Biopsy bags made from nylon cloth, 0.2 mm mesh diameter. All seams are heat-sealed. Allows for unrestricted fluid movement around the tissue. Reduces the loss of small biopsy specimens. Reduces cross contamination and pressure artifacts by using sponges.
Size: 45 x 74 mm
Electron Microscopy Sciences For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
For use with the Tissue-Tek CRYO3 Microtome/Cryostat Cryo 2000™, these plastic Cryomold specimen holders have round shapes and a tab for easy handling.
Ted Pella Inc SEAL N FREEZE LARGE 50/PK
SEAL'N FREEZE® CRYOTRAY®Cryo Embedding Molds.-- Large: 25 L x 30 W x 20mm D (1 L x 1.2 W x 0.8" D), pkg/50 trays (200 molds). The SEAL’N FREEZE® CRYOTRAY® is a compact system of plastic cryo embedding molds with attached sealable lids. This tray system allows for batch processing of tissue samples in perfect uniform blocks that are ideal for cryo sectioning and storage.Each disposable plastic SEAL’N FREEZE® CRYOTRAY® includes four individual molds which can be easily separated from the center connector by folding and tearing along the perforated borders.
Electron Microscopy Sciences Flat Embedding Mold Flat Embed Mold Single End, 6 mm deep, 14 x 5 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. Standard flat embedding mold.
Depth: 6 mm
Size: 14 x 5 mm
Cavities: 21
Polysciences, Inc. Peel-A-WayEmbedding Mold (Square - S22)
Peel-a-Waya Embedding Mold (Square - S22). Disposable paraffin molds designed to in.Peel-a-Way in. from the solidified embedded block. Be sure to consider Polyciences' Polyfin and Peel-a-Way Micro-Cut Paraffin for use with Peel-a-Way molds. May also be used for epoxy and acrylic resin embedding procedures. Features: - Polyethylene - 22mm x 22mm square - 20mm deep - 288 molds per case