Embedding Cassettes and Storage
Andwin Scientific TISSUE TEK/MILES MEGA CAS
The Tissue-Tek� Mega-Cassette� is made to be used for processing and embedding larger, thicker specimens, including bone, eye, and teeth. There are three textured surfaces that can be written on to offer users easy identification and organization. The cassette are able to work with solvents and decalcifying solutions. This measures 30 mm x 24 mm x 11 mm. This is sold in a case of 750.
Electron Microscopy Sciences Filing & Polishing Stick & Strip
A plastic handle, 10 1/2" (267 mm) long, holds strips of emery paper or cloth 11"x1" (279x25.4 mm). Strips are easily replaced. Comes complete with 2 strips/set (grit 120 and 240).
Thomas Scientific Cassette, Tissue Embedding with Attached Lid, 30ø Writing Area, AQUA, 500/Dispenser Box, 2 Boxes/Unit
The 30Ý angled cassette features an extra-large writing surface and two side panels ideal for labeling. The cassette has an integral lid that snaps apart and securely locks into the base of the cassette. The lid can be removed and reattached repeatedly to access the specimen. Note: These cassettes are not suitable for use on cassette printers. Extra large textured writing surface Wide finger tab on the back of the cassette for easy opening The lid is designed to be removed from the base and reinserted into front tabs to lock into place
Electron Microscopy Sciences Lowicryl HM20 Kit
Lowicryl resins are highly cross-linked acrylate-based embedding resins, designed for use over a wide range of embedding conditions. These resins provide low viscosity at low temperatures. All of these resins are photopolymerized by long wavelength (360nm) ultraviolet light. Since the initiation of the polymerization is largely independent of temperatures, blocks may be polymerized at the same temperatures used for infiltration. The resin may also be chemically polymerized at 60 degree C. Nonpolar (hydrophobic) usable to -70 C.
Electron Microscopy Sciences LR White Resin Medium- Grade Kit
A very low viscosity (8cps), non-toxic resin, suitable for both Light and Electron Microscopy. LR White is a polar monomer polyhydroxylated acromatic acrylic resin. It can be cured by heat or by UV light. Sections of polymerized LR White resin are hydrophilic. This character allows immuno-cytochemistry reagents to easily penetrate into the sections and etching of the sections is not necessary (etching sections will effect delicate tissue antigens). LR White sections also show minimal non-specific staining. Its low viscosity makes it ideal for infiltrating decalcified bone and teeth as well as plant tissues. It is available in medium and hard grade. Kit consists of: 500 ml LR White Resin, 10 ml UV accelerator.
Electron Microscopy Sciences Lowicryl K4M Monostep 225 GR
The same as our Lowicryl complete kits but this new formulation allows you one stop embedding without all of the cumbersome preparation and mixing. This pre-mixed, ready to use resin, saves you time and minimizes chemical contact. MonoStep Lowicryl is ideal for use in immunohistochemistry and immunolabeling. Store at room temperature.
Electron Microscopy Sciences JB-4™ Solution A 800 ML
A water soluble embedding media which is based on Glycol Methacrylate (GMA) plastic embedding. It is intended for use in preparing samples for high resolution microscopes (HRLM). The catalyzed monomer acts as a dehydration and infiltration agent; therefore, complete dehydration through 100% ethanol is not necessary (although recommended for large or dense tissues). Conventional paraffin sections have a greater degree of shrinkage and produce inadequate morphology when compared to JB-4.
Electron Microscopy Sciences JB-4 Plus™ Embedding Kit
JB-4 Plus offers all of the same features as JB-4 except it produces less of an exothermic reaction than JB4 which is good for temperature sensitive tissues. J Kit consists 500 ml Solution A, 15 ml Solution B, 8 g Benzoyl Peroxide Catalyst.