Embedding Cassettes and Storage
Electron Microscopy Sciences Gilder Aperture Grid with Single 1000 µm hole, Molybdenum
Single Slot aperture grids have a thickness of are 50 microns. Aperture diameter is 1000 um.
Material: Molybdenum
Research Products International Corp Tissue Processing Cassette, Lilac, 500/cs
Designed for processing various tissue and biological samples. Cassettes keep specimens submerged in liquid during all phases of sample processing. Efficient flow through slots maximize fluid exchange and ensure proper drainage. Easy to use. Snap apart and conveniently lock the lid into the base of the cassette. Cassettes can be opened and closed numerous times and always relock securely without risk of specimen loss. Molded from high density polymer. Labeling areas located on three sides of cassette with a 30° angle writing surface.
Optional cassette storage drawer available provides convenient storage and identification for up to 250 cassettes. Heavy duty cardboard construction.
Electron Microscopy Sciences EM5-8B-PE 5 Block Embedding Mold-8 mm Body
The block embedding mold features an innovative new design based on the widely used Ø8 mm size embedding mold. The unique two part design allows for easy removal of resin blocks, as well as incorporating many other advantages over currently available embedding products.
It has separate base and tube sections that clip together to form the familiar capsule shape. It allows for easy removal of resin blocks achieved by simply pulling the mold apart by hand.
It can produce blocks up to 20 mm in length with no razor blades or capsule presses are required. Each mold can be clipped to other molds, allowing for the creation of trays of desired size. Each cavity is numbered 1 < 5, whilst the end support stands have designated areas for writing indexing numbers or comments.
Electron Microscopy Sciences Cold Embedding Molds, 1.5" diameter
These 2 part molds may be used for all cold embedding epoxies. Comes with a detached cap for easy removal. The molds come in 3 different sizes to accommodate all of the samples you may have. The molds are made from HDPE and we recommend the use of mold release spray prior to use.
Diameter: 1½"
Electron Microscopy Sciences EMS Multi-Well Embedding Mold, Blue
This unique silicone mold has 2 different cavity sizes to meet all of your embedding needs. 2 troughs: 1"(L) x 1/8"(W) x 1/8"(D). 14 cavities: 1/4"(L) x 1/2"(W) x 1/8"(D). 1 trough: 2 3/4"(L) x 3/32"(W) x 1/8"(D). 10 cavities: 3/8"(L) x 3/4"(W) x 1/8"(D). Each cavity has an alpha-numeric marking, A1-A7, B1-B7, C1-C5, D1-D5.
Electron Microscopy Sciences Embedding Capsule Holder
Fabricated form polypropylene, a direct substitution for the BEEM capsule holders. 15 positions. Fits embedding capsule size 00' (8.5 mm diameter). Sturdy, long lasting, and stackabe.
Electron Microscopy Sciences Embedding Ring, Yellow
Molded from the highest quality plastic, our Embedding Rings fit most base molds. The large writing surface further eases identification and handling. The base measures 1 5/8" x 1 1/8" and the ring measures 1" x 1" (25 x 25 mm).
Electron Microscopy Sciences PTFE Flat Embedding Mold Set
The PTFE Flat Embedding Mold offers flat embedding for most resins, including LR White, LR Gold, JB-4, Immuno-Bed and Lowicryl and can be used for both UV/low temperature and thermal cure. It may be used as a substitution for the silicone molds. The individual cavities are pre shaped to reduce block trimming.
For curing anaerobic material, we recommend using Aclar film, cut-to-size of the mold and lower on top of the mold after you ʽjust over-fill' the cavities with embedding resin. Due to the flexibility of the PTFE, you just bend the mold to pop out the cured resin blocks. After all the cast blocks have been removed, reinsert the mold to its holder to re-shape the mold.
The mold holder is machined from aluminum and anodized black. Each of the 18 cavities measures 5 mm W x 14 mmL x 4 mm deep. Overall mold measures: 5 1/2" x 3" x 1/4” (140x50x8 mm).
Electron Microscopy Sciences Embedding Bar 2 each, 30 x 30 mm & 24 x 24 mm
Stainless steel well bars for precision embedding techniques addressing the most difficult embedding tasks.
Size: 30 x 30 mm & 24 x 24 mm
Electron Microscopy Sciences Square Mesh Cassettes with Lids Packed Separate, Green
Biopsy processing cassettes are similar to the slotted cassettes but have a 1 mm square mesh for small biopsies. Made from Acetyl Polymer, which is a special high density polymer that keeps specimens safely submerged in solution, these cassettes are totally resistant to most histological solvents and their slots offer maximum flow through for good fluid exchange and proper drainage.
The lids can be opened and closed as often as necessary and they always relock securely without danger of specimen loss. Large labeling areas are located on three sides of the cassette for your convenience.
Color: Green
Electron Microscopy Sciences Peel Away Disposable Embedding Mold Assorted Sample Pack
Peel Away Disposable Embedding Molds are used for plastic or paraffin embedding. No block trimming needed. Inside fingers hold ID slip which becomes embedded in the block for positive permanent identification.
Electron Microscopy Sciences Slotted Cassette with Lids Attached, Blue
Made from Acetyl Polymer, which is a special high density polymer that keeps specimens safely submerged in solution. These cassettes are totally resistant to most histological solvents and their slots offer maximum flow through for good fluid exchange and proper drainage. The lids either come attached to the cassette or are packaged separately. The lids can be opened and closed as often as necessary and they always relock securely without danger of specimen loss. Large labeling areas are located on three sides of the cassette for your convenience. Each slot measures: 1x5 mm. Contains three dispenser boxes of 500 cassettes.
Color: Blue
