Embedding Cassettes and Storage
Electron Microscopy Sciences Flat Embedding Mold Flat Embed Mold Single End, 4 mm deep, 14 x 5 mm
A clear silicone rubber with very high tear strength. It can be reused more times than the conventional silicone molds. It is resistant to most epoxy resins and its clear base allows positioning of the specimen lighted from beneath. Standard flat embedding mold.
Depth: 4 mm
Size: 14 x 5 mm
Cavities: 21
Electron Microscopy Sciences Wafer-Mount™ 559
Available in sheet form 10"x10" (254x254 mm). To use, remove the paper backing exposing the adhesive layer. The substrate is positioned on the film and pressed down firmly so that it adheres to the plastic film. No heating is required. The wafer mounted on the plastic film can then be held down using a vacuum manifold or mechanical means for dicing or scribing. After dicing or scribing, the parts can be separated from the wafer-mount 559 film by washing in acetone or MEK. Ideal for holding down silicon wafers, alumina, or glass substrates for scribing.
Electron Microscopy Sciences BEEM Capsule Holder, Size 00
These holders are used to hold capsules upright during the resin embedding stage. The cavities (22) allow for illumination from the bottom of the holder for specimen orientation. Holds size "00", conical, and bottle neck capsules.
Size: Size 00
Electron Microscopy Sciences Plastic Tissue Capsule
Plastic tissue capsules molded from polyethylene and resistant to all processing chemicals, including Zenker's Fixative. A three-compartment divider which is removable for specimens up to 35 mm. A weighted end floats the capsule in a upright position to conserve space. Perforated on the top and bottom for better circulation of the fluid. Snap-on hinged cover.
Electron Microscopy Sciences Transparent Wafer Container Single, 2.5", Polypropylene Material, 75 x 11 mm
The carriers are used for storage and or shipping wafers. They prevent all types of damage and contamination to the wafer during shipping and even storage. Each of the containers are packed in 1000 class clean room and bag. The set includes the Container , the cover and the spring. Boxes are transparent and made from Anti-Electrostatic Polycarbonate.
Use: 2½" (63 mm)
Material: Polypropylene
Dimensions: 75 x 11 mm
Electron Microscopy Sciences BlocStor 3 Tissue Block Storage for Supa Mega, Flatpack
The BlocStor range of tissue block storage products is manufactured from recycled fiberboard and provides a cost-efficient archiving and storage solution. All boxes are designed for strength, rigidity, long term archiving of tissue blocks, and for maximum utilization of storage space. Every BlocStor is supplied with a pre-printed archive label for clear identification and rapid retrieval.
Electron Microscopy Sciences Secure-Seal™ Imaging Spacer, 1 well 20 mm, 0.12 mm Depth
Confine specimens without compression with SecureSeal imaging spacers. SecureSeal imaging spacers are ultra thin adhesive spacers which peel and stick to coverglass or microscope slides to confine specimens without the need for compression.
Wells: 1 well
Diameter: 20 mm
Depth: 0.12 mm
Dimensions: 25 mm x 25 mm
Electron Microscopy Sciences Well Bars Set 101
We offer Well Bar Sets to make your ordering easier and to offer you a complete set for facilitate your work. Two sizes well bars; Six small chucks; Four large chucks; Four Over-Chuck Freezing Blocks; One Chuck Bin; 16 Dispensing Slides; Cutting Board/Freezing Girdle; 1 Elevated Freezing Block; 1 Angle Embedding Forceps; and accessories.
Psl Equipment Inc BLACK BIOPSY PAPER 500/PK
Non-absorbent porous mesh, specifically designed for processing biopsy specimens. Allows fluid to flow through freely while containing small tissue fragments.
Electron Microscopy Sciences Embedding Capsule Holder
Fabricated form polypropylene, a direct substitution for the BEEM capsule holders. 15 positions. Fits embedding capsule size 00' (8.5 mm diameter). Sturdy, long lasting, and stackabe.