Bioreactor Vessel Hardware
Ace Glass, Inc. Photochem reactor body, 250mL, complete with spinbar, sparger, bushing and PTFE tubing
Complete photochemical reactor featuring spinbar, sparger, bushing and PTFE tubing. 250mL reaction vessel is made of borosilicate glass to accomm ODate ACE 7854, 7856, or 7857 immersion wells. Vessel has one 14/20 angled joint for sparger tube, one 24/40 vertical joint for condenser, and one #7 Ace-Thred side arm for a thermometer. Center joint is 60/40, and the bottom of the reactor is flat to allow use of a stir magnet.
Bellco Glass, Inc. Stainless Steel 3-Port Assembly , 1L For Angled 45mm Sidearms
Size: 1lSeam welded w/ electropolish finish3-port w/ siphon, fill & vent tubesIncludes: 45mm pp cap & silicone gasket Longest tube: 2.5". MADE IN THE USA.
Bellco Glass, Inc. Large Flange O-Ring Only,200mm
200 mm large flange 0-ring for use with SST flange clamp. MADE IN THE USA. 200 mm 0-ring Red silicone rubber construction
Bellco Glass, Inc. Vertical Disk Impeller, 3L Bioreactor - 2 1/4 OD"
VERTICAL DISK IMPELLER 3L MADE IN THE USA Material: 316 SSTFor bioreactor system - 7802-03115Dimensions: 2" od x 47/64" wideFor .375" od shafts
Bellco Glass, Inc. 2-Port Sampler Assembly , 32mm For Larger 32mm Side Arms's
Universal port assembly for 32mm sidearms2 -port sampler assembly, 316l sst materialBoth tubes: .187"od x .117" idSupplied with 32mm s/cap & silicone linerThis port cap assembly can be used on any usage of 32mm sidearms. MADE IN THE USA
Takara Bio Tet-On 3G Bidirectional Inducible Expression System (with ZsGreen1)
Tet-On 3G Bidirectional Induci
Ace Glass, Inc. 500mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, 0-8mm valve and 28/15 ball joint bottom outlet, #11 Ace-Thred inlet/outlet, complete with addition funnel, condenser, manifold & stirring assemblies
Complete, one-piece 500mL jacketed pressure reactor is designed to perform low to moderate positive pressure reactions, synthesis, and catalysis. Flask has a #25 center neck, (3) #15 side necks, and (1) #7 side neck. Flask bottom outlet is 0-8mm 28/15 ball joint. Jacket inlet/outlet has a #11 Ace-Thred for use with 3/8 I.D. tubing. Rated 45 PSI at 100 degrees C. Reactor system includes addition funnel, condenser, manifold, and stirring assemblies.
Bellco Glass, Inc. 4-45 Bioreactor Flask complete, 3L
The 4-45 bioreactor vessel is manufactured from Type 1 Class A Borosilicate Glass. This vessel has 4 sidearms around 100mm center neck. The stainless steel cap seal has 5 ports for insertion of 12mm probes and 1/4″ tubes. The vessel has an internal impeller assembly with stainless steel ball bearings and PTFE paddle. MADE IN THE USA. Specifications:Accepts All Standard Fittings And Probes316L Stainless Steel Cap Seal with compression fittings for probes/tube insertion.4 sidearms positioned 90° for increased capabilities.Accessories:1965-11400 Flask Only, 1L1965-60014 SST Cap seal, 1L, 5 port with IOB1965-13400 Flask Only, 3L1965-60034 SST Cap seal, 3L, 5 port with IOB1965-45200 45mm Plug w/Compression Fitting & Hose Barb.
Bellco Glass, Inc. 2-Port Stainless Steel Assembly ,15L For Vertical Over Head Drive Vessels
2-port 45mm cap assembly, 15lFor 15l 1964 style Over Head Drive vessels. MADE IN THE USALong tube: 1/4"od x 17 1/8"Short tube: 1/4"od x 2.156"All tubes extended up 1.0" above the cap slugSupply 45mm s/cap & white silicone liner
Bellco Glass, Inc. Stainless Steel Baffle Assembly , 10L For 10L Bioreactor Systems
Stainless Steel Baffle Assembly , 10L For 10L Bioreactor Systems. Manufactured from 316l stainless steel with ra32 finish or better inside and out. The assemblies attach to the headplate. MADE IN THE USA.
Chemglass Life Sciences 1 L Unjacketed Bioreactor Vessel (CLS-1378-01)
The Chemglass Life Sciences one liter unjacketed bioreactor vessel is a glass containment component for laboratory-scale microbial fermentation and cell culture systems. It is supplied as the standalone vessel and is designed to integrate with compatible headplates, agitators, and support accessories to form a complete one liter bioreactor setup.
- One liter nominal volume.
- Unjacketed design for direct use without a temperature jacket.
- Glass construction for chemical resistance and visual monitoring.
- Compatible with headplate assemblies that provide multiple ports.
- Vessel only; headplate, motor, and accessories sold separately.
Ace Glass, Inc. 1000mL, two-piece pressure reactor complete with 0-8mm valve and 28/15 ball joint bottom outlet, 100mm head with #15center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold, stirring & temperature control assemblies
1000mL, two-piece pressure reactor complete with 0-8mm valve and 28/15 ball joint bottom outlet, 100mm head with #15center, (3)#15, (1)#7 side necks, addition funnel, condenser, pressure manifold, stirring & temperature control assemblies
Bellco Glass, Inc. Stainless Steel Sparge Assembly w/Frt, 3/8 For 3L Bioreactor System
316l stainless steel sparger assembly with stainless steel frit for 3 liter bioreactor system. MADE IN THE USA English threads Material: 316l SST with electropolish finish ra 32 or better tubing specifications: .250" od x .152" idOverall length: 10 43/64"Inseration Length: 9 1/4" With SST Frit - 10µ Supply with SST Nut & O-ring
Bellco Glass, Inc. Hi-Torq Over Head Drive Adapter,100mm
Hi -Torque Over Head Drive Adapter is used in conjunction with the High-Torque Over Head Drive Motor to drive the impeller assembly for mixing within a vessel. Adapts all Bellco PTFE impeller assys or SST impeller assys. Used with 100mm cap assembly. 316 SST design with polyester/SST bearing. Includes two (2) 1/4"npt female plugged ports for optional fittings.NOT HIGH SPEED!SPEED RANGE: 5- 150rpmDimensions: 3 3/4" l x 3 3/4' w x 7 1/2" tall (including dust shield coupling. MADE IN THE USA