Combination Ion Selective Electrodes
Cole-Parmer Insertion/Submersion pH Probe; SJ/CPVC/100Ohm RTD; Tinned/BNC
In-line or submersible electrodes with probe guard operate from 23 to 176°>F (-5 to 80°>C) and have a PVC housing with a 3/4'' NPT(M) fitting on both ends. Epoxy body withstands pressures to 100 psi. Measure pH from 0 to 14. All electrodes measure 6-3/4''L x 1'' OD, with a 1-3/4'' insertion depth.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Perchlorate, Double-Junction, BNC
These fast and accurate electrodes do not require an external referencethey're easier to use than separate sensing and reference half-cell electrodes. As double-junction combination ion-selective electrodes, they are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results.
Cole-Parmer Oakton Ion Selective Electrode (Electrode type: Sodium)
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Hach Company Intellical™ ISECL18101 Chloride (Cl⁻) Ion Selective Electrode (ISE) with Calibration Reagents Pack
The Intellical™ Chloride ISE Analysis Package contains all you need to start measuring chloride (Cl-) with your HQD meter instrument: The Intellical™ ISECL181 Chloride ISE with 1 m cable, 1 L bottles of 100 mg/L and 500mL of 1000 mg/L of Hach Chloride standard solutions, pack of 100 Hach chloride ionic strength adjustor (ISA) Powder Pillows.
Cole-Parmer pH Probe, Refillable, long and thin body
Glass body combination probes are able to withstand higher temperatures and chemical attack. All have 3.3 ft (1 m) long cables with BNC connectors.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Nitrate, Double-Junction, BNC
Easily fit this electrode of nitrate with glass body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Combination Ion-Selective Electrode (ISE), Calcium (Ca+2)
Easily fit this electrode of calcium with epoxy body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Combination Ion-Selective Electrode (ISE), Copper (Cu+2)
Easily fit this electrode of copper with epoxy body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Fluoride, Double-Junction, BNC
Easily fit this electrode of fluoride with glass body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Combination Ion-Selective Electrode (ISE), Cyanide (CN)
Easily fit this electrode of cyanide with epoxy body into small spaces without any added reference electrode.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Bromide, Double-Junction, BNC
Easily fit this electrode of bromide with glass body into small spaces without any added reference electrode.
Cole-Parmer Interchangeable Cable Refillable SJ Glass pH Probe; 329 x 8 mm
Match these combination electrodes with one of the connector cables listed at the right. If you use several pH meters that each have different connector types, these electrodes and cables can save you money. The probe-cable interface is moisture proof and noise free, with a sealing O-ring, gold-plated contacts, and PTFE insulation.
Hach Company Sension+ 9655 Fluoride Ion Selective Electrode (ISE) – sensor only
Sension+ 9655 is a half-cell (reference not integrated) fluoride ion selective electrode (ISE) with an epoxy body and non-replaceable crystalline membrane selective to fluoride ions in solution. It is recommended for use with the Sension+ 5044 reference electrode. The 9655 has a fixed 1 meter cable and BNC connector for laboratory use with the Hach Sension+ MM374 Multimeter. The 9655 is ideal for measuring fluoride concentrations in drinking water, wastewater and general water quality applications.
