Materials Testing Instruments
MSC SPI Telescoping Gage, 5/16-1/2 in Range, TiN Coated, Hardened Tool Steel
This telescoping gage is designed for accurately measuring hole sizes. It operates by expanding a plunger within the hole, which then locks into place. The gage is subsequently removed, and the final hole dimension is precisely determined by measuring across its contacts with a micrometer.
- Plunger expands in the hole and locks into place
- Final hole size is obtained by measuring over contacts with a micrometer
- Contact points are made of hardened and ground precision tool steel
- Contact plungers automatically self-center in all positions
- Maintains constant spring tension for uniform feel
- Features a satin chrome finish
- Available with TiN coated plungers for enhanced durability
MSC Vermont Gage Class ZZ Plug Gage Set, 0.011 to 0.75 in, 740 Pc
This Class ZZ plug gage set features a range of 0.011 to 0.75 inch, with a total of 740 pieces. It offers a precise tolerance of 0.000100 inch and is constructed from steel with a black oxide finish. Each set includes a Certificate of Accuracy with NIST Traceable Standards, ensuring reliability for critical measurements.
- Range from 0.011 to 0.75 inch diameter.
- Comprises 740 individual pieces.
- Precision tolerance of 0.000100 "
- Constructed from durable steel.
- Features a black oxide finish.
- Designed with a minus tolerance type.
- Includes a Certificate of Accuracy with NIST Traceable Standards.
- Ideal for setting micrometers, NO-GO gaging inspection, measuring hole diameters, and calculating distances between holes.
MSC Insize USA LLC Dial Caliper, 12 inch, 0.001 inch Graduation, Stainless Steel
This dial caliper is designed for precise measurements up to 12 inches. It features a shockproof design and is constructed from durable stainless steel. This tool is supplied with a manufacturer inspection certificate traceable to NIST, ensuring reliability and accuracy in various applications.
- Accuracy of +/-0.002 inch
- Measures up to 12 inches
- Jaw length of 2.441 inches
- Range per revolution is 0.100 inch
- Constructed from stainless steel
- Dial graduation of 0.001 inch
- Includes an inspection certificate and a hard plastic case
- Features a shockproof design
MSC Van Keuren Thread Pitch Diameter Measuring Wire, 1.75 mm Pitch, 1-1/2 in Long, 3 Piece Set
This Van Keuren thread pitch diameter measuring wire set is designed for precision measurement applications. Each set includes three wires, featuring a 1.75 mm pitch and a length of 1-1/2 inches. These wires are essential for accurately determining the pitch diameter of threaded components.
- 3 piece set for comprehensive measurements
- Length of 1-1/2 in for versatile use
- 1.75 mm pitch for specific thread profiles
- 1.0104 mm measuring wire diameter for accuracy
- Designed for precise thread pitch diameter determination
MSC SPI Telescoping Gage, 3/4 to 1-1/4 in, 4.4 in Overall Length
The SPI Telescoping Gage is designed for measuring in the range of 3/4 to 1-1/4 inches, with an overall length of 4.4 inches. It features a 4-inch long handle and is constructed from hardened tool steel with a satin chrome finish.
- 4 in handle length
- Constructed from hardened tool steel
- Features a satin chrome finish
MSC SPI Thread Plug Gage, 1/4-20 Thread, 3B Class, Single End, No Go
This Taperlock Thread Plug Gage is designed for the precise inspection of internal threads, ensuring proper fit and assembly of mating components. It features a robust tool steel construction and includes a certificate traceable to NIST standards for reliable measurements.
- Taperlock design
- Ensures proper assembly of mating components
- Certificate traceable to NIST included
- Handles not included with single members
- Thread measurements conform to ANSI specification 1.16B
- Through hardened RC 60-64
MSC Vermont Gage Plug & Pin Gage, Class ZZ Minus, 1.50 mm Diameter, 2 in OAL
This is a Class ZZ Minus Plug & Pin Gage with a 1.50 mm diameter and 2 inch overall length. It is designed for precise measurement applications such as setting micrometers, NoGo inspection, and calibrating verniers and other measuring devices. Constructed from steel, this gage features a 10 micro coating/finish and includes a Certificate of Accuracy with NIST Traceability, ensuring reliable and accurate performance for demanding laboratory and industrial environments.
- Designed for setting micrometers, NoGo inspection, and calibrating verniers and other measuring devices.
- Constructed from durable steel for long-lasting use.
- Features a 10 micro coating/finish for enhanced performance.
- Includes a certificate of accuracy with NIST traceability.
MSC Vermont Gage Class ZZ Plus Plug Gage, 1.3028 in Diameter
This plug gage is designed for precise measurement applications. It features a specific diameter for accurate gaging and is suitable for various industrial and laboratory uses.
- Class ZZ Plus gage
- 1.3028 inch diameter measurement
- Handle sold separately
MSC Lift-All Web Sling, Twisted Eye & Eye, Polyester, 6 ft
This web sling is a Type 4, Twisted Eye & Eye design, made from durable polyester. It measures 6 feet long and 2 inches wide, offering a vertical capacity of 6400 lb. It is also rated for a 5000 lb choker capacity and a 12800 lb basket capacity, suitable for various lifting applications.
- Twisted eye and eye, type 4 sling design
- Polyester material for durability
- 6 ft long, 2 in wide
- 6400 lb vertical capacity
- 5000 lb choker capacity
- 12800 lb basket capacity
- 10 in eye length
- 2 plies for strength
- Yellow color
- Maximum operating temperature of 200°F
- Abrasion-resistant
- Meets WSTDA, ASME B30.9, and OSHA 1910.184 standards
MSC Vermont Gage Pin Gage, 0.3575 in Diameter, Class ZZ, 52100 Tool Steel
This pin gage is designed for precise measurement applications, featuring a 0.3575 inch diameter and a Class ZZ tolerance. It is constructed from durable 52100 tool steel and has an overall length of 2 inches, ensuring reliable performance.
- Constructed from 52100 tool steel
- Measures 0.3575 in diameter
- Features a Class ZZ tolerance
- Has a 2 in overall length
- Finished to 10 microfinish
MSC Fowler Mechanical Outside Micrometer, 9 in, 0.0001 in Graduation, Ratchet Stop
This mechanical outside micrometer is designed for precise measurements up to 9 inches. It offers a high level of accuracy and features a ratchet stop thimble for consistent measuring force, making it suitable for various industrial and laboratory applications.
- Measures up to 9 inches
- Graduation of 0.0001 inch
- Accuracy of 0.0003 inch
- Ratchet stop thimble for consistent pressure
- Solid carbide measuring faces for durability
- Quick, easy zero adjustment on sleeve
- Includes a wrench and case
MSC Value Collection Mechanical Outside Micrometer, 0.01 in Graduation, Ratchet Stop Thimble, Satin Chrome
This mechanical outside micrometer is designed for precise external measurements. It features a 0.01 inch graduation and a ratchet stop thimble for consistent pressure, making it suitable for various industrial and workshop applications.
- Accurate to 0.006 inch
- Equipped with a ratchet stop thimble for repeatable measurements
- Measuring faces are made of durable steel
- Features a satin chrome finish for corrosion resistance
- Does not include a digital counter, offering a traditional mechanical reading
MSC Vermont Gage Pin Gage, Class ZZ, NoGo, Steel, 3.13 mm
This pin gage is a Class ZZ gage, designed for NoGo inspection. It is made of steel and features a 3.13 mm size. This reversible gage utilizes a metric system of measurement with a 0.00508 mm minus tolerance. It is ideal for applications such as setting micrometers, verniers, and other measuring devices.
- Designed for NoGo inspection
- Class ZZ gage
- Reversible style
- Metric system of measurement
- 3.13 mm diameter
- Minus direction of tolerance
- 0.00508 mm tolerance
- Ideal for setting micrometers, verniers, and other measuring devices
MSC Vermont Gage Pin Gage, Class X Plus, 0.1590 in Diameter, 2 in Length
This Class X Plus pin gage is ideal for precise calibration of measuring equipment or direct gaging of parts. It features a specific diameter and length, is constructed from durable tool steel, and comes with a certificate of accuracy traceable to NIST standards.
- Diameter of measurement: 0.1590 in
- Tolerance: 0.00004 in
- Material: Tool steel
- Application: Calibration of measuring equipment or to gage parts directly
- Includes: Certificate of accuracy with NIST traceability
- Length: 2 in
- Coating/finish: 4 micro
MSC Vermont Gage Pin Gage, Class X Plus, 0.6300 in Diameter, 2 in Length
This high-precision Class X Plus pin gage is designed for accurate calibration and gaging applications. Constructed from durable tool steel, it features a 0.6300 in diameter and a 2 in length, ensuring precise measurements for various equipment or parts.
- Includes certificate of accuracy with NIST traceability.
- Suitable for calibration of measuring equipment.
- Can be used to gage parts directly.