Chromatography Autosampler Vials Only
Grainger Crimp Fitting 45deg 1/4 ID 7/16 MFlare
The Grainger 14L759 is a Westward brand 1/4-inch drive socket set. This 108-piece socket set includes both SAE and metric sockets ranging from 1/4 inch drive to 3/4 inch drive in shallow, deep, and universal depths. The set is made from chrome vanadium steel and comes packed in a sturdy plastic blow mold case for storage and portability. This socket set is ideal for automotive and machinery repair and maintenance.
Sigma Aldrich Fine Chemicals Biosciences WHEATONR Type I crimp top
Serum Bottles with exceptional wall strength and superior heat and chemical tolerances.Ideal for long and short term sample storage lyophilization and vaccine / injectable drug containersfits most lyophilization applicationsManufactured from WHEATON 400 borosilicate molded glass that conforms to USP Type I requirementsShrink-wrapped partitioned modules reduce breakage
Trajan Scientific Clear QsertVial With fused 300l insert Kit Pack, 12x32mm, 100 Pack
Kit Pack. QsertVial, 12x32mm, Screw, Clear With fused 300µl insert, PTFE/Silicone, Blue QuikCap, 100 Pack
Grainger Crimp Fitting 1/4 I.D. 1/4 M BSPP
The Aeroquip 16P803 hydraulic crimp fitting is made of steel and has a 1/4" NPTF thread size. It is designed for use with 1/4" OD tubing and has a working pressure of up to 5000 psi. This reusable crimp fitting creates a leakproof seal. It requires a hex crimping tool to properly secure tubing. The 16P803 fitting weighs 0.1 lbs and measures 1-1/4" in length. It can withstand operating temperatures from -65 to +250 degrees Fahrenheit. This hydraulic crimp fitting is manufactured in the USA by Eaton's Aeroquip division.
Microsolv Technology Corporation Easy Purch Pack Max Rec Autom
Vial & Cap Kit Includes 100 EA 1.2ml, MRQ, Screw Top, Clear Autosampler Vials and 100 EA matching Screw Caps with Tan Silicone Rubber / White PTFE Septa bonded in the Blue Caps. AQ Brand Easy Purchase Pack. 1/PK.
Grainger Crimp Fitting 3/8 I.D. 3/8 F BSPP
The Grainger 16P779 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor with a 1.15 Service Factor. It has a 48Y Frame with a 1" diameter shaft and operates on 60 Hz power. The motor is totally enclosed, fan cooled (TEFC) with a cast iron frame and thermally protected. It can provide 0.56 kW of output power. The 16P779 electric motor is suitable for industrial and commercial applications requiring a reliable 3/4 HP single phase motor.
Bellco Glass, Inc. Big Mouth Amber S/T Vial,2.0mL 12x32mm - 10-425 Thd
Clear vials are manufactured from type 1 class a Borosilicate glass. Amber vials are manufactured from type1 amber glass. Designed for use with varian and other auto-samplers. MADE IN THE USA. Size: 12x32mm Cap size: 10-425
Bellco Glass, Inc. Big Mouth Amber Vial, 2.0mL Crimp Top - 12x32mm
This 11mm crimp vial is made of amber borosilicate glass with a 40% larger opening that prevents broken needles due to increased target area. Designed to work in Agilent and other autosamplers. Sample capacity of 2mL, 12mm in diameter, and 32mm in height. Vials compatible with 11mm crimp and Poly Crimp Seals. 1,000 vials per case with 10 shelf packs of 100 vials packed in plastic shrink wrapped scallop packaging. MADE IN THE USA.
Phenomenex Inc Beveled Edge, Flat Bottom, Clear 33, No Patch
Verex™ Headspace Vial, 23x46mm, 10mL AR0-3220-12
Microsolv Technology Corporation Vials, Crimp Top, Glass. Amber, 2ml, with Write-On Patch and fill lines. Deactivated. An 11mm Serum Finish with 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Deactivated / Silanized Borosilicate Glass, amberized. Amber vials are often used for light sensitive compounds and considered low actinic. Write-On Patch and fill lines are epoxy paint for reduced smearing with solvents. Use with 11mm aluminum crimp caps. These wide opening vials have serum finish tops that provide the best seal for chromatography, when used properly with correct aluminum crimp caps.
Grainger Crimp Fitting 1-1/4 I.D. 1-1/4 M BSPP
The Grainger Approved Crimp Fitting is a 1-1/4" I.D. x 1-1/4" M BSPP crimp fitting made from brass. It has a maximum pressure rating of 3000 psi at 70°F and is designed for use with soft, annealed copper tubing. This fitting allows you to make a flared connection without soldering. Simply insert the tubing and crimp in place for a secure connection. With its durable brass construction, this fitting is corrosion and abrasion resistant. The 1-1/4" size works for a variety of residential and commercial applications. This is an ideal option when you need to make a reliable crimped connection.
Grainger Crimp Fitting 1/2 I.D. 1/2 M BSPT
The Grainger 16P812 is a 16-gallon plastic trash can with a dome lid. It is made of high density polyethylene and measures 28" high x 18" diameter. The trash can has a reinforced rim and base for durability. It features an attached dome lid to help contain odors and fits standard 32" can liners. This commercial trash can is ideal for high traffic areas and has a weight capacity of 200 lbs. The gray color provides a clean, uniform look. Overall, this is a heavy-duty plastic trash can well-suited for commercial and industrial use.
Trajan Scientific La-Pha-Pack , Vial, Headspace, Screw, 10mL, 23x46mm, Amber, Round bottom, Case of 1000. Made in Germany.
La-Pha-Pack , Vial, Headspace, Screw, 10mL, 23x46mm, Amber, Round bottom, Case of 1000. Made in Germany.
Grainger Crimp Fitting 45 Deg 3/8 ID M20-1.5 F
The Parker Hydraulic Crimp Fitting is made of steel and has a Parker Code 55CY93. It is a hydraulic crimp fitting that creates leak-proof connections. This fitting has a working pressure of 5000 psi and a temperature range of -65 to +250°F. It has a tube OD of 3/4 in, a thread size of 9/16-18 UNF-3A, and a tube wall thickness of 0.065 in. The Parker Hydraulic Crimp Fitting 55CY93 is designed for use in hydraulic systems to create secure, leak-free connections between tubing and hose assemblies.