Chromatography Autosampler Vials Only
Analytical Sales & Services MSQ Vial Kit: Clear Screw Vials with Marking Spot And Caps with Pre-Slit PTFE/Silicone Liners
Vial Kit -Clear Screw Vials w/MS & Pre-Assembled Screw MSQ Cap with Pre-Slit PTFE/Silicone Liners
Trajan Scientific La-Pha-Pack , Vial, Screw, 12x32mm, Clear With marking Ppanel, 9mm, 100 Pack. Made in Germany.
La-Pha-Pack , Vial, Screw, 12x32mm, Clear With marking Ppanel, 9mm, 100 Pack. Made in Germany.
Microsolv Technology Corporation Vials, Crimp Top, Glass. Clear, 2ml. Deactivated. An 11mm Serum Finish with 12x32mm outer dimensions. For use as an autosampler vial. 100/PK.
First hydrolytic, Class A, Deactivated / Silanized Borosilicate Glass. Use with 11mm aluminum crimp caps. These vials have serum finish tops that provide the best seal for chromatography, when used properly with correct aluminum crimp caps.
Trajan Scientific L-MARK® Brand Vial Standard 9mm Screw 2mL Marking Panel 12x32mm, 100 Pack
Vial, Screw, 12x32mm, Amber, W/ marking panel, 9mm QuikVial, 100 Pack
Sigma Aldrich Fine Chemicals Biosciences WHEATONR Type I crimp top
Serum Bottles with exceptional wall strength and superior heat and chemical tolerances.Ideal for long and short term sample storage lyophilization and vaccine / injectable drug containersFits most lyophilization applicationsManufactured from WHEATON 400 borosilicate molded glass that conforms to USP Type I requirementsShrink-wrapped partitioned modules reduce breakage
Grainger Crimp Fitting 1/4 I.D. 1/4 M BSPP
The Aeroquip 16P803 hydraulic crimp fitting is made of steel and has a 1/4" NPTF thread size. It is designed for use with 1/4" OD tubing and has a working pressure of up to 5000 psi. This reusable crimp fitting creates a leakproof seal. It requires a hex crimping tool to properly secure tubing. The 16P803 fitting weighs 0.1 lbs and measures 1-1/4" in length. It can withstand operating temperatures from -65 to +250 degrees Fahrenheit. This hydraulic crimp fitting is manufactured in the USA by Eaton's Aeroquip division.
Grainger Crimp Fitting 3/8 I.D. 1/2 M BSPP
The Grainger 16P805 is a 16-ounce can of Rust-Oleum Stops Rust Protective Enamel spray paint in Gloss Black color. This oil-based paint provides a durable protective coating that resists corrosion, fading, chipping, and abrasion. It features a comfort spray tip with a wider finger pad to reduce fatigue caused by continuous spraying. The advanced spray system allows paint to spray at any angle, even upside down, for full coverage. It is ideal for coating metal, wood, plastic, wicker, and more. One coat covers most surfaces.
Grainger Crimp Fitting 5/8 I.D. M30-2 F Metric
The Parker Hydraulic Crimp Fitting is a steel hydraulic fitting that uses crimp technology for high pressure hydraulic hose connections. It has a working pressure of up to 5000 PSI and a temperature range of -65 to +250°F. The fitting body is made of carbon steel with a zinc dichromate finish. It uses a hex crimp design and is compatible with many Parker industrial hoses. The crimp fitting creates a strong, reusable fitting for hydraulic systems.
Grainger Crimp Fitting 90 Deg 1/2 ID 1/2 FBSPP
The Grainger 16P796 is a 3/4 HP, 115V, 1725 RPM, 56C Frame, Open Drip Proof, Single Phase, Ball Bearing, Electric Motor. It has a NEMA standard 56C frame with a 1.15 service factor. The motor is totally enclosed and fan cooled with Class F insulation and a C-face endshield for easy mounting. It can provide 0.56 kW of power with 1.8 nominal amps at full load. This electric motor is designed for general purpose applications.
Microsolv Technology Corporation Vials, Snap Top, Glass. Clear, 2ml, with Write-On Patch and fill lines. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. 100/PK
First hydrolytic, Class A, Borosilicate Glass. Write-On Patch and fill lines are epoxy paint for reduced smearing with solvents. Lowest cost in class for budget minded laboratories.
Grainger Crimp Fitting 1/4 I.D. 1/4 F Metric
The Aeroquip 16P889 hydraulic crimp fitting is made of steel and has a 1/4" NPT female thread. It is designed for use with 1/4" OD tubing. The operating pressure is up to 5000 psi. The fitting has a zinc dichromate finish for corrosion resistance. It meets or exceeds SAE J514 specifications. The 16P889 crimp fitting provides a reliable, reusable connection for hydraulic tubing in fluid power systems.