Labconco™ Protector™ Combination Glove Boxes

Can function as either a filtered box or a controlled atmosphere glove box

Manufacturer: Labconco™ 5080070

 View more versions of this product

Catalog No. 16-200-448

  Check Availability

This item is a non-standard voltage; please ensure you are ordering the correct product.

Please contact customer service for assistance: 1-800-766-7000.

Add to Cart

Required Accessories : Supporting base, vacuum pump for evacuating, inert gas for filling.

    Specifications

    Liner Material Fiberglass
    Voltage 208/230V
    Certifications/Compliance CE
    Amperage 10A
    Depth (Metric) Exterior 87.4cm
    Depth (English) Exterior 34.4 in.
    Type Glove Box
    Height (English) Exterior 45.7 in.
    Width (English) Exterior 63.9 in.
    Filter Type HEPA
    Display LCD
    For Use With (Application) Laboratories that have multiple types of glove box applications or anticipate that their applications may change in the future (atmosphere sensitive materials and hazardous materials)
    For Use With (Equipment) AtmosPure™ Re-Gen gas purifier
    Height (Metric) Exterior 116.1cm
    Lighting Two 25w fluorescent
    Plug Type Schuko Plug
    Ports 2
    Width (English) Interior 35.5 in.
    Weight (Metric) 227kg
    Weight (English) 500 lb.
    Width (Metric) Exterior 162.3cm
    Width (Metric) Interior 90.17cm

    Opening two internal valves converts the box from controlled atmosphere mode to filtered mode. Ideal for laboratories that have multiple types of glove box applications or anticipate that their applications may change in the future.

    Overall Features

    • Factory leak-tested—no detectable leaks greater than 1 x 10-6mL/sec.
    • LCD dual display—one shows pressure of both chambers, the other shows airflow (CFM), air changes/min. (ACM) and main chamber pressure (in. of water)
    • 0.38 in. thick laminated safety glass viewing window with 36.0W x 27.6 in.H (91 x 70cm) viewing area
    • Pair of neoprene gloves 0.015 in. thick, 30 in. long, size 9 3/4
    • Two 8 in. ID epoxy-coated aluminum, double-grooved glove ports with neoprene gaskets
    • Switches for light, blower and electrical receptacle
    • Two 25-watt fluorescent lights
    • Dry-powder epoxy-coated, 18 and 20 gauge steel exterior panels

    Filtered Glove Box Features

    • Particulate containment <20 nanograms per cubic meter (naproxen sodium surrogate)
    • Fast “clean up” time—0.05 ppm average tracer gas levels or less detected during perimeter scan testing (surpasses ASHRAE 110 standards) after 5 minute dilution
    • Airborne particulate cleanliness exceeds ISO Class 4 conditions and achieves ISO Class 3 conditions
    • Inlet and outlet particulate (HEPA or ULPA) filters to prevent contaminants from entering or leaving the glove box chamber
    • Test port for challenging HEPA or ULPA filter integrity
    • True Bag-In/Bag-Out Filter Disposal System for safe filter removal and replacement
    • Built-in blower with speed control capable of airflow from 15 CFM to 85 CFM depending on voltage and frequency
    • Mutable, audible/visual low airflow/pressure alarm
    Controlled Atmosphere Glove Box Features
    • Exceed Class 1 atmosphere containment conditions for oxygen permeation <1.67 ppm/min. per ISO 10648-2 test method
    • Four manual valves with 3/8 in. compression fittings—two on the main chamber and two on the transfer chamber
    • Automatic control of the main chamber pressure, main chamber evacuation and filling cycles, and transfer chamber evacuation and filling cycles
    • Regulation of vacuum/pressure between -5 and +5 inches of water gauge in the main chamber and between 0 and -29.5 inches of mercury in the transfer chamber
    • Mutable, audible/visual alarm that sounds when pressure/vacuum level is outside set limits
    • Three-position foot pedal (increase gas/fill, off, evacuate/decrease gas)
    • Factory-installed, rear-mounted, low profile stainless steel pressure relief bubbler at ±6 inches of water gauge
    • Two rear-mounted inlet and outlet 3/4 in. OD compression fittings for easy connection to optional gas purifier or accessory drying train

  • Description & Specifications

Related Products


Product Content Feedback

We continue to work to improve your shopping experience and your feedback regarding this content is very important to us. Please use the form below to provide feedback related to the content on this product.

Product Title

By clicking Submit, you acknowledge that you may be contacted by Fisher Scientific in regards to the feedback you have provided in this form. We will not share your information for any other purposes. All contact information provided shall also be maintained in accordance with our Privacy Policy.

Cancel Submit