Baths
Enzo Life Sciences BML-282 (5mg)
Novel inhibitor of ubiquitin C-terminal hydrolase L1 (IC50 = 0.81 µM). It displays 21-fold greater selectivity over UCH-L3 (IC50 = 17 µM). Alternative name: N-(3,4-Dichlorobenzyl)-5-bromoisatin O-acetyloxime. Purity: ≥98% (TLC). Solubility: Soluble in DMSO (5mg/ml with warming) or dimethyl formamide (10mg/ml with warming). Long Term Storage: -20°C.
Sigma Aldrich Fine Chemicals Biosciences JulaboR shaking water bath1EA
.nbspMicroprocessor technology.nbspSplash-proof mains switch.nbspKeypad for actual setpoint values high and low temperature warning functions.nbspMulti-Display (LED).nbspLarge bath volume.nbspReduced space requirement.nbspRS232 interface.nbspElectronic timerCover needs to be ordered separately.
Research Products International Corp Lab Armor Beads, 2 Liters
Lab Armor Beads are a revolutionary modern day concept for replacing water in baths, ice in ice buckets and aluminum blocks in dry block incubators. These unique thermal technology beads have a broad temperature range of -80°C to 180°C. Lab Armor Beads can also be used to replace aluminum blocks in dry block heaters. Help to maintain a clean and green environment in the laboratory. Improves energy efficiency of standard water baths by over 50%.
Stays Clean - Protected from water-borne contamination
Stays Organized - No more water accidents
Saves Time - Always on and ready to use
Eco-Friendly - Highly recyclable beads, fewer harmful biocides and more energy efficient.
Research Products International Corp Digital Control Water Bath with Lid, 14 Liter Capacity, 15 x 12 3/4 x 10 1/2 Inches
Hot Tubs Water Baths offer a variety of sizes to meet all of your needs and are ideal for general lab applications. The space saving design allows for the most efficient use of bench space and the PID Controller offers easy temperature selection, rapid heat-up and excellent stability. Baths can also be used as a boiling water bath. User simply sets temperature to “boiling mode” and attaches gabled cover.
Large easy to read LED panel displays temperature settings in 0.1°C increments and programmable timer up to 99hrs, 59mins. Temperatures from +5°C above ambient up to 100°C can be maintained with ±0.1°C accuracy. Recessed panel protects controls from spills. Seamless steel tank includes diffuser tray and shelf. Built for years of reliable performance and include a two year warranty.
Excellent performance
Boiling mode is ideal for melting agar
Two year warranty
Ace Glass, Inc. Condenser, pilot plant, 1000mm jacket, 35/25, size F hose barbs
CONDENSER 1000MM 35/25 BARBED
Electron Microscopy Sciences EMS MyBath™ Water Bath, 8L, 115V, Ambient +5 to 100°C temp range
MyBath is designed to guarantee superior accuracy and performance in a compact footprint. MyBath models feature seamless, stainless steel chambers for easy cleaning and long life. The chambers resist rust and have no corners to collect dirt or contamination.
Adjustable in 0.1 degree C increments, the temperature is shown on a large, 3-digit display. The Quik-CAL allows for simple, in-lab calibration. High efficiency insulation maintains temperature stability and uniformity within the bath, while keeping the housing cool to the touch. Easy to use controls to digitally select and monitor settings. Drains for water changes.
Temp range: Ambient +5 to 100°C
Accuracy: ± 0.5°C at 37°C
Increment: 0.1°C
Uniformity: ± 0.2°C at 37°C
Chamber: 12.8 (W) x 10.4 (D) x 5.9 (H)"
Enterprise Technology Solutions Universal High Capacity Bath T
Universal High Capacity Bath Tissue w/OptiCore Septic Safe 2-Ply White 2000/Roll 12/Carton
Enterprise Technology Solutions Premium Bath Tissue Roll With
Premium Bath Tissue Roll With Opticore Septic Safe 2-Ply White 800 Sheets/roll 36/carton
Bellco Glass, Inc. 3L Insct Sys Prc MicroCarrier ,115V
Designed for growing insect cell cultures such as SF9 and SF21 cells. The system comes completewith all accessories needed to grow your insect culture line for expression. MADE IN THE USA Includes:–7785-D2005 Digital 5-Position Magnetic Stirrer 115V–1965-03000 Micro-Carrier Spinner Flask Complete 3L–1965-20003R 2-Port Assembly 3L–7808-10004 Gas Blending Stand–7725-00120 Air Supply Pump 115V–7800-10050 Silicone Tubing 1/4” ID
MSC Rubbermaid Bath Tub Mat, 36 x 18 in, Rubber, Plumbed Wash Station
This bath tub mat is specifically designed for use with a plumbed wash station. Its rubber material provides a non-slip surface, which is crucial for safety in wet environments, helping to prevent slips and falls. The generous dimensions of 36 in long by 18 in wide offer ample coverage around the wash station, ensuring a secure footing for users.
- Provides a non-slip rubber surface for enhanced safety
- Helps prevent slips and falls in wet environments
- Generous 36 in long by 18 in wide dimensions offer ample coverage
- Ensures secure footing for users
- Clean white color suitable for wash stations
Alkali Scientific 20L Digital Water Bath, bath water heater
This equipment is designed to handle a broad spectrum of laboratory procedures, including incubation, inactivation, and agglutination, as well as various pharmaceutical, serological, biomedical, and industrial processes. To ensure optimal temperature uniformity, the Water Bath is equipped with an energy efficient, large area heater and thermostatic control. Its PID microprocessor control system (Proportional Integral Derivative) offers precise heat control by anticipating the approach to your set point temperature and preventing overshoot. A redundant safety thermostat is standard on all models. Display: 3.25" LCD Working Temperature Range: Ambient +5 °C to 100 °C Temperature Stability: ±0.1 °C Temperature Calibration Capability: 1 point Working Access (L x W x D): 24.1 x 43.2 x 15.2 cm Flammability Class (DIN 12876 1): I (NFL)
MSC SPI Plug & Pin Gage, Class ZZ Minus, 0.2820 Dia, Steel
This Class ZZ Minus Plug & Pin Gage is designed for precise measurement applications, featuring a 0.2820 inch diameter. Manufactured from durable steel, it ensures accuracy with a tolerance of 0.000200 inch (0.0002 mm).
- Diameter of measurement: 0.2820 inch
- Class: ZZ Minus
- Tolerance: 0.000200 inch (0.0002 mm)
- Material: Steel
Memmert water bath WTB 50, 115volt +5C above ambient to +100C (Dependant on Ambient) Gable Cover/ Reversible Shelf included
Memmert water bath WTB 50, 115volt +5C above ambient to +100C (Dependant on Ambient) Gable Cover/ Reversible Shelf included
Chemglass Life Sciences 12L Lab Armor Beads, Shipped in (3) 4L Containers
These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20 ° C to 8 ° C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180 ° C. However, product may be used up to 300 ° C without loss in thermal performance, but product fluidity may be reduced. Please contact technical services for s
Chemglass Life Sciences CoolCube Microtube and Microplate Cooler
CoolCube Microtube and Microplate Cooler. The CoolCube is designed to store samples safely on the lab bench without sample degradation due to temperature increase or fluctuation. Constructed of DuraStar (a high strength polymer) and a patented gel refrigerant, the CoolCube maintains temperature at approximately 0¿C for up to four hours. Simply place the CoolCube in a freezer overnight and it¿s ready for use, keeping samples cool and safe at the bench, without messy ice buckets or wet tubes. One side of the Benchmark CoolCube can be used as a convenient PCR workstation with wells for 12 standard 1.5/2.0mL microtubes and one 96 well PCR plate or 0.2mL tubes/strips. The other side can be used to hold 36 standard 1.5/2.0mL microtubes.