Dry Block Incubators
Cole-Parmer Stuart Digital 2-Block Heater, 200⁰C, 120 V
Stuart dry block heaters are designed for precise heating of test tubes, microcentrifuge tubes, cuvettes, and microtiter plates. The "number of blocks accepted" indicates the number of single-width blocks accepted by each heater. A heater that accepts two single-width blocks will also accept one double-width block.
Ace Glass, Inc. DYNABLOC EXTRACTOR DYNABLOC EXTRACTOR
Dynabloc T-handle extractor for removing blocks when hot.
Electron Microscopy Sciences Mini Cooling Chamber, 6 Holes, 3" x 1½" x 1½"
Mini-cooling chambers are ideal for use when only a small number of microtubes are required. Each Mini-Chamber will fit in our 1L Glacierbrand Ice Pan(6.13" x 6.13" x 3.61"). Mini-Chambers are anodized aluminum and utilize our "Surround-A-Tube" cooling technology.
Capacity: 6 Holes
Dimensions: 3" x 1½" x 1½"
Use: 1.5-2.0 ml Tubes
Electron Microscopy Sciences EMS MyBlock™ Dry Bath I Single Position universal block 115 V
The EMS MyBlock series has several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of temperature.
MyBlock's transparent lid promotes better temperature uniformity and minimizes stratification in the block by maintaining a warm air jacket layer while reducing energy consumption by minimizing heat loss. The hinged lid can be flipped open or easily removed (lifted off) to accommodate taller tubes.
Universal blocks accept tubes from 0.5 to 2.0 ml and, with just a quick flip to the other side, accomodate 0.2 ml tubes, PCR strips or in the dual block model only a PCR plate. Other blocks are available for tubes up to 50 ml. With 1 Quick-Flip universal block.
Cole-Parmer Techne BLoCKICE Cooling/Heating Block, 100-230 VAC, 50/60 Hz
This benchtop chilling and heating block is ideal for incubating sample tubes at temperatures ranging from 32 to 104°F (0 to 40°C). The Isotemptemperature control ensures all contents are kept at an even temperature, whether cold or warm. Aluminum block inserts provide a temperature stability of±0.2°C for precise control of reaction temperature. Unit holds two single-width inserts or one double-width inserts. Integrated countdown/count-up timer with audible alarm allows up to nine days to be programmed and will not start until a stable temperature has been reached. A dark plastic lid protects light-sensitive reagents while maintaining the cooled environment.
Cole-Parmer Techne Dri-Block Aluminum Heating Block Insert, 20 x 12 mm diameter, conical
Interchangeable aluminum heating blocks provide excellent thermal conductivity and accommodate various test tubes, cups, and plates. Depending on the combination of blocks selected, plastic spacers (36620-67) can be used to fill a half-width recess, ensuring optimal thermal performance. Most blocks come with a separate hole to accept a thermometer. Order a flexi-block to accommodate multiple size tubes, vials, or cuvettes at once. Unskirted PCR plates can be heated in either size flexi-block. Skirted microtiter plates, deep-well plates, and PCR plates can only be incubated in the triple-width version.
Ace Glass, Inc. Dynabloc, heating block, flask, 125mL Erlenmeyer size, (3) 69mmwells
DynaBloc heating block with (3) 69mm wells, for use with 125mL Erlenmeyer flasks. Dynabloc heating system supplies low-cost, highly efficient, simultaneous stirring and/or heating of multiple samples contained within small, round bottom flasks. When hot, blocks should be removed using a T-handle DynaBloc extractor (Part 50978109).
Electron Microscopy Sciences Lapping & Polishing Fixture Angled Mounting Block, 0.5 °
1" (25 mm) diameter stainless steel mounting blocks for lapping and polishing fixtures. For use with models 150, 151, and 155.
Angle: 0.5°
Use: Models 150, 151, 155
Ace Glass, Inc. Dynabloc block, 20mL & 30mL vial size, 18 (28x27.6mm) holes
20mL & 30mL vial size Dynabloc block with 18 size 28x27.6mm holes. The Dynabloc heating system supplies low-cost, highly efficient, simultaneous stirring and/ or heating of multiple samples contained within various sizes of small vials and tubes.
Alkali Scientific™ BSH5001 Alkali Scientific™ One-Block Digital Dry Bath 115V
The MyBlock Series Dry Baths is a “next generation” product line that introduces several major advantages over traditional dry baths. They are the first digital dry baths to include advanced microprocessor controls, timed or continuous operation and a removable hinged lid. In addition, an optional external temperature feedback probe can be positioned directly inside a sample tube, providing real-time control and monitoring of actual sample temperature. Digital temperature control (set and walk away) Hinged lid (improves uniformity & conserves energy) External (optional) temperature probe (measures actual sample temperature Available with Quick-Flip universal blocks (supports all common tube sizes, PCR strips and PCR plates) Patent Pending Blocks sold separately
Electron Microscopy Sciences Vacuum Vacuum Mounting Blocks, 2.125"
Vacuum Mounting Bocks are for use with the Models 155DV, 155D, and 155V lapping and polishing fixture. Made of stainless steel. Blank for Vacuum Pattern. Stainless Steel.
Diameter: 2.186" (55.5mm)
Use: 155D, 155V, 155DV
Ace Glass, Inc. Dynabloc block, 40mL vial size, 18 (28x50mm) holes
40mL vial size Dynabloc block with 18 size 28x50mm holes. The Dynabloc heating system supplies low-cost, highly efficient, simultaneous stirring and/ or heating of multiple samples contained within various sizes of small vials and tubes.
Ace Glass, Inc. Dynabloc, 9601-16 Instatherm bath insert, 16mm OD tube size, 24 holes
DYNABLOC INSTATHERM 16MM TUBE
Ace Glass, Inc. Dynabloc block, 4 dram 16mL vial size, 28 (22x35.6mm) holes
4 dram, 16mL vial size Dynabloc block with 28 size 22x35.6mm holes. The Dynabloc heating system supplies low-cost, highly efficient, simultaneous stirring and/ or heating of multiple samples contained within various sizes of small vials and tubes.