Bath Accessories
Chemglass Life Sciences 0.75L Lab Armor Beads
0.75L Lab Armor Beads. These dry metallic beads replace water in water baths, aluminum blocks in dry baths, ice in ice buckets, and give old equipment a cool, shiny, state-of-the-art look while maintaining temperatures of -20C to 8C for 4 or more hours. Open sources of water in the lab can put the lab at risk if incubating and spreading biological or chemical contamination between samples, equipment and people. Unknown biological and chemical contamination in water can readily enter your incubating samples resulting in distorted data and non-reproducible results. Lab Armor bead technology will save you countless hours of reworking ruined experiments and eliminate cleaning. Lab Armor Beads extend the life of your bath by eliminating corrosion and reducing burn-out risk. For best performance, use product at an operating temperature of -80 to 180C. Product may be used up to 300C without loss in thermal performance, but product fluidity may be reduced.
Bellco Glass, Inc. Compression Fitting,1/2in. Large Flange - Repl Part
Large flange headplate assemblies.Universal headplates fit 5l thru 36l vessels. MADE IN THE USA. Corrosion resistant 316l stainless steel.These thermowells are designed specifically for the Bellco control systems and fit through a 5/16" fitting on the stainless steel headplate. See the BCS section for complete listings. Probe adapters & compression fittings are designed using our standard 45 mm blue polypropylene open top caps and white silicone gaskets. A wide variety of fittings are available to allow pH and do monitoring via insertion of these probes into the sidearms of vessels. Bellco probe adapters are designed to allow introduction of threaded probes into vessels through 200 mm stainless steel headplate or a 45 mm vertical sidearm.
Accurate Chemical Acryl-AquaClean, Microbiological Additive for heating bath fluids (a WAK-Chemie product), 250ml
Microbiological additive for heating bath fluids compatible with acrylic glass and aluminium. Inhibits growth of bacteria, algae and fungi. Beginning of contamination is indicated by decolorisation of the blue liquid. Active ingredients are non-volatile. 250ml
Julabo USA Inc RS232 cable, 3m, for use with shaking water baths SW22/SW23
Bath Accessories, Julabo, RS232 interface cable, length 3 m. For use with shaking water bath models SW22, SW23 only!
Julabo USA Inc 5L Thermal C5 bath fluid -60…+110 °C
Bath Accessories, Julabo, Thermal C5 - 5 Liter -60°C +90 °C. 5 cSt polydimethylsiloxane, colorless
Thomas Scientific Staticmaster Ionizing Cartridge
Static Eliminator Duostat For neutralization of static charge on balances, optics, films, etc. Strength 500 µCi; effective range approximately 40 mm No state or USNRC-specific license is required to purchase or possess this unit. Effective life span is one year. Spent unit may be mailed to the manufacturer for proper disposal. Unit can be placed in or near the item to be neutralized or can be mounted on 3620A50 (1 each of 3620A30 must be purchased to use 3620A50 Single Unit Positioner, A30 Ionizing Units may be used without positioner). Stand of stainless steel with flexible gooseneck arm and maximum height of 15”. Stainless steel housing 3” x 1” x 1/4” high, with mounting tabs. Instantly solves the problem created by static when weighing filters; increases accuracy and repeatability Just one passage through the unit offers reliable, repeatable weighings Portable and easy positioning, requires a minimum amount of bench space. Staticmaster Ionizing Car
Julabo USA Inc Each, in-line solenoid valve set
Bath Accessories, Julabo, Set of 2 solenoid valves (max. +100°C) to control in-line flow. Fittings: M16x1 male/female. Connects to Stakei outlet – make sure to specify 115V or 230V when ordering. Allows for fluid flow to application only when pump operates. Eliminates potential siphoning in the off state. For use with HL, SL, MS and MX circulators only.
Julabo USA Inc Pair, M16x1f to 1/2" tube stub adapters
Bath Accessories, Julabo, Adapter 1/2 in. tube, Pair of M16x1 female to 1/2" tube stub adapters. For use with Swagelok union fittings.
Julabo USA Inc Pair, G 3/4" female to M16x1 male adapters
Bath Accessories, Julabo, Adapters G 3/4" female to M16x1 male, stainless steel for FL(W)1203/1703/2503/4003
Julabo USA Inc Pair, G 1 1/4" female to 1" hose barb adapters
Bath Accessories, Julabo, Adapters G 1 1/4" female to barbed fittings for tubing 1" inner dia. for FL(W)2506/4006/7006/11006/20006
Julabo USA Inc Pair, G 3/4" female to 3/4" MNPT adapters
Bath Accessories, Julabo, Adapters G 3/4" female to NPT 3/4" male for FL(W)1203/1703/2503/4003