Reaction Kettles
Ace Glass, Inc. Head, 6in, five neck, 45/50 center, (4)24/40
6 inch reaction head with a flat ground flange for use with all reaction flasks that have a 150mm (6 inch) Duran ground mating flange. Head has five necks: (1) 45/50 center, (4) 24/40 sides.
Ace Glass, Inc. 2000mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, 0-8mm valve and 28/15 ball joint bottom outlet, #11 Ace-Thred inlet/outlet, complete with addition funnel, condenser, manifold & stirring assemblies
Complete, one-piece 2000mL jacketed pressure reactor is designed to perform low to moderate positive pressure reactions, synthesis, and catalysis. Flask has a #25 center neck, (3) #15 side necks, and (1) #7 side neck. Flask bottom outlet is 0-8mm 28/15 ball joint. Jacket inlet/outlet has a #11 Ace-Thred for use with 3/8 I.D. tubing. Rated 45 PSI at 100 degrees C. Reactor system includes addition funnel, condenser, manifold, and stirring assemblies.
Ace Glass, Inc. Flask, reaction, jacketed, 5L, 4in grooved flange, #11 Ace-Thred connections on jacket inlet/outlets for use with 3/8in
5L jacketed reaction flask with a 4 grooved flange, and #11 Ace-Thred connections on the jacket inlet/outlets for use with 3/8 I.D. tubing. Flask should be used with a stainless steel quick release clamp. Supplied with one CAPFE o-ring (PTFE encapsulated silicone).
Ace Glass, Inc. Head, solvent distillation, No-Air, 250mL, 14/20 joints, 14/20top take-off
Head, solvent distillation, No-Air, 250mL, 14/20 joints, 14/20top take-off
Ace Glass, Inc. European flask, jacketed, 500mL, 3 neck, 14/20 center, (2)14/20 sides
EURO FLASK 3NK 500ML 14/20
Ace Glass, Inc. Head, solvent distillation, No-Air, 1000mL, 24/40 joints, 14/20top take-off
Head, solvent distillation, No-Air, 1000mL, 24/40 joints, 14/20top take-off
Ace Glass, Inc. Reactor body, glass only, photochem, 500mL, jacketed, stopcock bottom outlet
Reactor body, glass only, photochem, 500mL, jacketed, stopcock bottom outlet
Ace Glass, Inc. Tube, pressure, 60mL, 150psi, 38.1mm OD, 10.2cm long, complete with #15 back-seal plug
60mL pressure tube with #15 Ace-Thred, rated for 150psig at as much as 120C. Includes #15 back-seal plug. Dimensions: 38.1mm O.D. x 10.2cm long.
Ace Glass, Inc. Tapered flask, 50mL, 3 neck, 14/20 center, (2) 14/20
50mL three neck tapered flask with walls tapered inward toward the bottom to allow continuous operation with smaller volumes. Flask has 14/20 center neck and (2) 14/20 side necks.
Ace Glass, Inc. Condenser, Allihn, 300mm, 29/42, #7 Ace-Thred connections glass only
300mm Allihn, bulb type, condenser with approximately one bulb per 50mm. Condenser features 29/42 standard taper inner and outer joints at the bottom and top, and a #7 Ace-Thred.
Ace Glass, Inc. PTFE filter reactor, 1000mL, complete, features halar coated SS coil, (5) 24/40 + coil in/out head and #80 valved bottom filter assembly
1000mL PTFE filter reactor with polypropylene filter support. Reactor includes a halar coated coil for heading and cooling. Head features five 24/40 joints as well as in/out coil. #80 valved bottom filter assembly facilitates easy filtrate recovery and cleaning. Reactor is suited for fluorine chemistry work as well as any work using strong alkalis where glass cannot be used.
Ace Glass, Inc. PTFE filter reactor, 250mL, complete, features (4)24/40 head and #50 valved bottom filter assembly
250mL PTFE filter reactor with polypropylene filter support. Reactor head features four 24/40 joints. #50 valved bottom filter assembly facilitates easy filtrate recovery and cleaning. Reactor is suited for fluorine chemistry work as well as any work using strong alkalis where glass cannot be used.
Ace Glass, Inc. Head, 150mm Duran flange, 5 neck, 24/40 center, (3)24/29, (1)45/40
5 neck head with 150mm flat ground Duran flange. Head features one 24/40 center neck, three 24/29 side necks, and one 45/40 side neck.
Ace Glass, Inc. 2000mL, one-piece jacketed pressure reactor with #25 center, (3)#15, (1)#7 side necks, 0-8mm valve and 28/15 ball joint bottom outlet, 28/15 ball joint inlet/outlet, complete with addition funnel, condenser, manifold & stirring assemblies
Complete, one-piece 2000mL jacketed pressure reactor is designed to perform low to moderate positive pressure reactions, synthesis, and catalysis. Flask has a #25 center neck, (3) #15 side necks, and (1) #7 side neck. Flask bottom outlet is 0-8mm 28/15 ball joint. Jacket inlet/outlet has a 28/15 o-ring ball joint. Rated 45 PSI at 100 degrees C. Reactor system includes addition funnel, condenser, manifold, and stirring assemblies.