Beakers
Glass beakers can be heated to much higher temperatures than the plastic counterparts, while offering higher clarity for content visibility and measuring. Glass beakers feature uniform sidewalls and bottom thicknesses with a flat bottom and a beak, or small spout, for easier pouring. Glass beakers may have graduated markings on their side that are accurate within 10 percent, though a graduated cylinder or volumetric flask is recommended for precise volume measurements.
Laboratory are available in a range of materials and in sizes from 10 mL to 6 L. Although glass beakers are common, beakers are also made from a variety of plastic resins (PMP, polystyrene, polypropylene, PFA, polymethylpentene, HDPE, ETFE, PTFE, and more). You may also find beakers made from stainless steel, quartz, and carbon.
A variety of beaker types are available:
- Griffin or Low Form: Shorter versions, with or without pouring lips and made of standard weight or heavy-duty borosilicate glass or polypropylene plastic
- Berzelius or Tall Form: Taller and narrower than Griffin beakers, but with similar characteristics
- Pharmaceutical: Taller and more narrow, these beakers are usually graduated in both milliliters and ounces and may have double pouring spouts
- Tri-Cornered: Plastic, disposable, and stackable, these beakers feature a triangular top opening that offers three dripless pouring spouts
- Handled: Glass beakers can have attachable handles and plastic beakers may have molded-in handles; larger handled beakers with spouts may be called pitchers
- Colored Markings: Most beakers have areas on the side suitable for writing; these marking spots are also available in white or your choice of colors
Ace Glass, Inc. 20mL 24/40 Barrett moisture test receiver, jacketed sidearm, glass plug
20mL Barrett type moisture test receiver with 24/40 standard taper joints for use in determining the water content in petroleum and bituminous material. Features a jacketed side arm and is supplied with 2mm bore glass plug.
Ace Glass, Inc. Funnel, 1000mL, jacketed, pressure equalizing, addition, 29/42 joints, 4mm PTFE stopcock.
1000mL jacketed pressure equalizing addition funnel with 29/42 top and bottom joints, and a 4mm PTFE stopcock. Jacket runs from shoulder at top of vessel to above the PTFE stopcock. Funnel has size D hose barbs for 3/8 ID tubing. Pressure equalizing arm runs from top of vessel to just below the PTFE stopcock. Graduations are in both ascending and descending volume. Bottom drip tip extends to the edge of the bottom inner joint. Top outer joint is reinforced for safety.
Ace Glass, Inc. Flask, reaction, 3L, jacketed, 168mm O-ring groove flat flange, 170mm bottom OD x 260mm H, 28/15 O-ring ball joints on jacket inlet/outlet
3L jacketed reaction flask with round bottom and 28/15 o-ring ball joints on jacket inlet/outlet. 168mm o-ring groove flat flange is used to seal a head, instead of a flat gasket. Jacketed for temperature control of ingredients. Supplied with CAPFE o-rings. Dimensions: 170mm bottom O.D. x 260mm H.
Ace Glass, Inc. 1000mL jacketed reactor, complete, (3) vertical 24/40, (2)#7 Ace-Thred, 0-10mm zero dead space bottom valve, 28/15ball joint inlet/outlets
1000mL jacketed reactor, complete, (3) vertical 24/40, (2)#7 Ace-Thred, 0-10mm zero dead space bottom valve, 28/15ball joint inlet/outlets
Ace Glass, Inc. Flask, jacketed, 20L, 200mm(8in) ground Duran; O-ring groove flange, 35/25 O-ring ball joint inlet/outlet
20L jktd cylindrical reaction flask with 200mm (8) Duran flat, ground flange and o-ring groove. Features a water/steam jacket with 35/25 o-ring ball joints on jacket inlet/outlet connections. Flask is supplied with one CAPFE o-ring for Duran flange. Flask includes reference graduations.
Ace Glass, Inc. Immersion well, glass, jacketed, #7 PTFE inlet, 48odx450mm
Immersion well, glass, jacketed, #7 PTFE inlet, 48odx450mm
Electron Microscopy Sciences PTFE Beakers, 50 ml, 58 mm height, 38 mm diameter
Is statically molded from virgin "PTFE" and machine finished to give a smooth surface for ease of cleaning and to eliminate contamination. Supplied with a pouring spout and they are virtually immune to chemical attack. Working temperature range is from cryogenic to 260 degree C (500 degree F). Ideal for use in wafer etching.
Capacity: 50 ml
Height: 58 mm
Diameter: 38 mm
Ace Glass, Inc. 2000mL jacketed filter reactor, complete with 28/15 ballpoint inlet/outlets, 100mm four neck 24/40 head, 80mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, clamp, bushings & O-rings
2000mL jacketed filter reactor, complete with 28/15 ballpoint inlet/outlets, 100mm four neck 24/40 head, 80mm bottom valved adapter, 100 micron PE & 350 micron PP filter supports, stir shaft, clamp, bushings & O-rings
Electron Microscopy Sciences Staccup Beakers 120 cc
Resistant to most chemicals. Beakers have frosted marking area, customary and metric graduations, and anti-drip ridge. Made of heavy gauge polypropylene. Suitable for parafilm cover.
Foxx Life Sciences Borosil® Beakers, Griffin Low Form with Spout, 25mL 60/CS
Borosil® Low-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from 5mL to 10L. Borosil® Beakers comply with ISO 3819 & DIN 12331. 500mL & 10L are not covered in ISO or DIN standards. 5mL & 10mL sizes are not graduated. In collaboration with Borosil Glass Works, Foxx Life Sciences is proud to bring the outstanding quality of Borosil® Type 3.3 Low-Expansion Borosilicate glassware to North America for the first time. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers unparalleled mechanical strength, clarity and reliability at competitive prices. And thanks to a unique annealing process, Borosil® Glassware is stress-free and incredibly resistant to thermal shock.
Electron Microscopy Sciences Thermotech™ PTFE Beakers 100 ml, 74 mm height, 56 mm O.D.
The beakers feature a unique combination of a pure "PTFE" Body with a specially formulated stabilized "PTFE" Carbon base as a single molding resulting in a totally inert pure "PTFE" inner surface. It is heatable to 270 degree C without distortion and has improved heat transfer. All "PTFE" Beaker caps can be used for Thermotech "PTFE" Beakers, accordingly to its sizes.
Height: 74 mm
Ace Glass, Inc. Instatherm; griffin beaker with lip and pouring spout, 600mL, 85mm ID, 90mm OD, 124mm height, 40v/8amp max, includes9698-20 connecting controller cord
Instatherm; griffin beaker with lip and pouring spout, 600mL, 85mm ID, 90mm OD, 124mm height, 40v/8amp max, includes9698-20 connecting controller cord
Foxx Life Sciences Borosil® Beaker Griffin Tall Form with Spout, 150mL, 40/CS
Borosil® Tall-Form Griffin Beakers are designed with pouring spouts for precise pouring. Uniform wall thickness & stress-free glass make them ideal for heating or cooling. High chemical resistance means Borosil® Beakers can be used in nearly any application. Avail. in sizes from 50mL to 1000mL. Borosil® Beakers comply with ISO 3819 & DIN 12331. 500mL is not covered in ISO or DIN standards.In collaboration with Borosil Glass Works, Foxx Life Sciences is proud to bring the outstanding quality of Borosil® Type 3.3 Low-Expansion Borosilicate glassware to North America for the first time. Manufactured from the same USP Type 1 borosilicate glass that North American scientists have come to trust, Borosil® Laboratory Glassware offers unparalleled mechanical strength, clarity and reliability at competitive prices. And thanks to a unique annealing process, Borosil® Glassware is stress-free and incredibly resistant to thermal shock.