Flasks
CELLTREAT Scientific Products 25cm2 Tissue Culture Flask - Vent Cap, Sterile
CELLTREAT Scientific Products 25cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Vent cap and maximum volume of 50mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 10/re-sealable bag, 200/case.
Bellco Glass, Inc. 225cm2 Cell Culture Flask Plug Seal Cap TC sterile 5/pk 25/cs
225cm2 Cell Culture Flask Plug Seal Cap TC sterile 5/pk 25/cs
CELLTREAT Scientific Products 182cm2 Tissue Culture Flask - Vent Cap, Sterile
CELLTREAT Scientific Products 182cm¿ Tissue Culture Treated Flask. Tissue Culture Treated Flasks have uniform hydrophilic surface ideal for consistent cell attachment. Convenient zip-closure bag is a practical alternative to folding and taping open bags. Large opening, canted neck design and moderate angles allow easy access to entire flask surface; ideal for cell scrapers. Stable base enables filling with flask standing upright. Thick, durable walls. Flask is printed with lot number and expiration date for easy identification and tracking. Vent cap and maximum volume of 600mL. RNase/DNase free and non-pyrogenic. Every case is printed with the lot number for quality traceability. Packaged sterile, 5/re-sealable bag, 40/case.
Cole-Parmer Techne 6027689 Glass Cell Culture Flask, 250 mL; 1/ea
Culture vessels come calibrated and have two side ports and a central filling port. All culture vessel parts can be autoclaved at 121°C and 15 psi for 30 minutes. Completely seal vessels for use with pathogenic materials. Silicone-encapsulated stir rods reduce the possibility of cells attaching to and growing on the surface. Order a complete culture vessel (flask, stir rod, and caps) to use with these biological stirrers or order just a flask to use with an existing stirrer.
Midwest Scientific CULTURE FLASK T115 RE-SEALABLE
TPP Tissue Culture Flask T115, Re-sealable, Filter Cap, 3/bag, 18/cs
Bellco Glass, Inc. MicroCarrier Spinner Flask complete, 100mL
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 100ml Center Cap:70mm Sidearm cap: 32mm OD X OAH:65 X 135
Bellco Glass, Inc. IOB w/ Water Jacketed Flask,1L
Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. MADE IN THE USA.
Bellco Glass, Inc. Water Jacketed Flask Only, 500mL
Flask only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8″ ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. MADE IN THE USA. Specifications:Jacket Volume (mL): 260mlCap Size: 70mmSidearm Cap Size (mm): 38OD x OAH: 110x200mm
Chemglass Life Sciences Spinner Flask Only, 6000mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Bellco Glass, Inc. Flat Bottom AHB Spinner Complete, 250mL
•Designed for the efficient growth of suspension cells at low speeds•Flask Specifications:. MADE IN THE USAo250 mL flat bottom, Type 1 Class A BorosilicateoDimensions: 85mm OD x 145mm OAHoTwo 32mm Sidearms angled 55º offset centeroOne 70mm Screw thread center neckoGraduations: 50mL to 250mL, every 25mLoIncludes two 32mm blue PP screw caps and pouring rings•Impeller Assembly Specifications:oConsists of PTFE coated magnet and white Teflon magnet holder•Glass Shaft Specifications:oType 1 Class A BorosilicateoDimensions: 7mm OD x 155mm long•Cap Assembly Specifications:oConsists of one 70mm blue PP screw cap with 16.2 mm hole for black compression fitting, 70mm white silicone liner with 15.8mm hole, 7mm black compression fitting
Chemglass Life Sciences Spinner Flask, 1000mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. MicroCarrier Flask Only,500mL,100mm Nk W/Dimple Bottom
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. SIZE: 500ml (working volume). Dimensions: 110mm OD x 170mm overall height. Center neck: 100mm. Two 45mm angled sidearms; (ANGLED 60°). Grad. Range: 100-500ml, every 50ml. Supply with (2) 45mm PP blue screw caps & pouring rings.
Chemglass Life Sciences BioProcess Spinner Flask, 250mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences 100mL Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Chemglass Life Sciences 500mL Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.