Microplate Sealing Films and Tapes
Thomas Scientific Pierce Heat Seal; pierceable heat sealing foil, 100 sheets (125 x 78 mm)
Heat sealing offers a 100% effective method of plate sealing, for complete seal integrity, as well as being quick and cost effective. Pierce Heat Seal is compatible with polypropylene and polystyrene plates. This seal demonstrates good solvent resistance and can be used for low temperature and room temperature compound storage in DMSO and organic solvents.
Bio Rad Laboratories PEELING FOIL HEAT SEAL 100/PK
Pkg of 100, laminate/foil peelable seals for PCR and sample storage, for use with PX1 PCR plate sealer.
Sigma Aldrich Fine Chemicals Biosciences X-Pierce Film, 100/pk
Also useful for protecting contents of plate from contamination during multiple manual reagent additions over time. X-Pierce films are 89 um thick vinyl with a 18 um thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96 well plates.
Alkali Scientific ASI™ General Purpose Sealing Film, 100/pk
General Purpose polypropylene films offer superior barrier properties to minimize evaporation and prevent well-to-well contamination. Ideal for use with polypropylene plates.Certified DNase- & RNase- free. Features good chemical resistance. Provides a very secure seal to minimize evaporation, but is slightly harder to remove than SealPlate films. Less rigid polypropylene film reduces aerosols upon removal. Specially formulated adhesive minimizes plate residue. Can be used as a temporary seal while awaiting further processing.
Alkali Scientific SealSafe™ Low-Evaporation Sealing Film, 100/Cs
SealSafe minimizes evaporation, prevents well-to-well contamination and spillage. Eliminates the “edge effect” which can occur with plate lids (e.g. greater evaporation in the outside plate wells).The rigid polyester film features good clarity and easy handling and provides a secure seal and is easy to remove.
Sigma Aldrich Fine Chemicals Biosciences AlumaSealR 96 film size 38
A 38 mum thick aluminum sealing foil film with a 38 mum layer of acrylic adhesive for use with 96 well plates. fits inside the rim of raised-rim plates. AlumaSeal 96 sealing films have one partial-width end tab with no perforations.film dimensions are 127 mm x 78 mm (9.5 mm end tab)Available as non-sterile onlyPierceableRecommended temperature range between -80C to 120CCertified DNase- RNase- and nucleic-acid-free
Analytical Sales & Services Top PFA Flms for 24-Well Parallel Synthesis Block, 25pk
NC0530526 TP PFA FLMS FR 24 WLL PRL 25PK
Alkali Scientific SealSafe Titan™ Sealing Film Rolls, 2 Rolls/pk, 100 Sheets/Roll, Sterile
SealSafe's dispenser facilitates the quick and easy dispensing of film from a roll allowing microplates to be sealed three times faster than using sheeted films. Cost-effective replacement rolls are sold separately. Ideal for use under the hood; the SealMate dispenser minimizes film contamination. Environmentally friendly; no paper liner to remove and discard; utilizes approximately 72% less material than SealPlate sheeted film. Each sheet is separated by an adhesive-free, perforated, color-coded green band. (This item is for 2 replacement rolls only. For stater kit, order SKU SF25ML or SF25ML-S for sterile version.)
Alkali Scientific VaporSeal™ Gas Permeable Membrane, Hydrophobic Sealing Film
VaporSeal™ features a Hydrophobic Sealing Film, gas permeable membrane with a medical grade, non-cytotoxic adhesive. The porous membrane consists of layers of heat welded rayon fibers. Moisture vapor transmission rate = 4,200g/m2/24hr. Easy-to-pierce with serological pipets and pipet tips for direct sample recovery.
Alkali Scientific AlumaFoil™ RollRight™, Dispenser +1 Roll of AlumaFoil Sheets, 500 Pre-Scored Sheets
Self-standing, non-slip supports hold the pre-scored aluminum foil sheets film roll securely in place for quick and easy bench-top dispensement. The roll unwind tension can be easily adjusted to user preference. Continuous backing liner can be torn off or fed directly into a wastebasket for disposal. Certified DNase- & RNase- free. Pierceable with a pipet tip or robotic probe for direct sample recovery. 2.0mil aluminum foil removes easily without tearing. The conformable nature of foil allows for the visual verification of the seal’s security around each well. Not recommended for long-term cold storage.
Labsource Inc Clear Weld Heat Seal Mark 2, Permanent Heat Seal, Optically Clear Polymer Film, 500 m x 115 mm
The Clear Weld Heat Seal Mark 2 is an optically clear, permanent sealing film specifically designed for scientific applications. It offers robust protection for polypropylene plates and ensures maximum seal integrity, making it ideal for critical assays such as PCR and qPCR. With dimensions of 500 m x 115 mm, it is autoclavable and resistant to solvents, ensuring reliability for both low-temperature storage and high-temperature incubations.
Thomas Scientific Gas Permeable Clear Heat Seal; clear heat sealing film, with 3 mm slits for gas transfer, 100 sheets (125 x 78 mm)
Peelable heat sealing film, optically clear; suitable for qPCR and optical applications Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. Our Clear Heat Seal is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates. Samples can also be accessed by pre-piercing with a blade, needle or our Pierce Plate (4ti-0398). The optical clarity of this seal enables its use for sealing plates required for imaging use, including fluorescent detection methods such as qPCR and colorimetric assays. The Clear Heat Seal forms a complete seal to a plate enabling both low temperature uses, including low temperature storage, and high temperature uses, such as PCR (when used with a pressurised heated lid). This seal demonstrates moderate solvent resistance and can be utilised for short term compound storage at room temperat
Electron Microscopy Sciences NUNC™ 96 Well Optical Bottom Plate White
The NUNC Coverglass Optical Bottom 96 Well Plates have an optically clear polystyrene plate bottom. This clear base permits microscopic viewing and reading of well. Minimum light scatter and low autofluorescence. The plate's upper structure is offered in black (for fluorometric detection). Sterile. External dimensions 128 x 86 mm.
Color: White