Cell Culture Flasks
Alkali Scientific CellPro™ 75cm² Cell Culture Flasks, Vented, TC Treated, 250mL, 5/pk, 100/cs
CellPro™ Cell Culture Flasks provide you with the highest level of protection for your cells during long-term cultivation and cell expansion. The design of the Cell Culture Flask is dedicated to improving workflow, providing superb protection and bringing peace of mind to scientists when it comes to their research. The Cell Culture Flasks allow you to conduct routine cell culture applications with the peace of mind that comes with knowing that your cell cultures are protected at the highest level.
Stellar Scientific T-175 Tissue Culture Treated Flask, Vented Cap, Canted Neck, 40/cs
Tissue Culture flasks are manufactured under the most stringent conditions and include a 100% integrity test to assure the reliability with your tissue and cell culture work. Class 100,000 clean room, USP class VI virgin polystyrene, and ISO 9001:2000 quality management systems all contribute to the consistent tissue and cell culture performance of our products. The tissue culture surface treatment used provides a negatively charged hydrophilic surface and results in a consistent cell attachment surface. Growth surfaces are flat and free from striation to maximize usable growth area and transparency.
TWD Scientific LLC BioX 75cm2 Tissue Culture Flask. Case of 100
TWD Scientific LLC BioX 75cm2 Tissue Culture Flask. Case of 100
Sino Biological T25 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
T25 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
Bellco Glass, Inc. Water Jacketed Flask Only, 6L
Flask only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8″ ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. MADE IN THE USA. Specifications:Jacket Volume (mL): 3700mlCap Size: 100mmSidearm Cap Size (mm): 45OD x OAH: 200x445mm
Chemglass Life Sciences Spinner Flask, 500mL, Jacketed, BioProcess, Plain Bottom, Complete
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Chemglass Life Sciences BioProcess Spinner Flask, 500mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Chemglass Life Sciences BioProcess Spinner Flask, 1, 000mL, Dimpled Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Sino Biological T175 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
T175 Cell culture flask- Vent cap (Purple) - TC treated (Sterile)
Cole-Parmer Techne 6027608 Glass Cell Culture Flask, 1000 mL; 1/ea
Culture vessels come calibrated and have two side ports and a central filling port. All culture vessel parts can be autoclaved at 121°C and 15 psi for 30 minutes. Completely seal vessels for use with pathogenic materials. Silicone-encapsulated stir rods reduce the possibility of cells attaching to and growing on the surface. Order a complete culture vessel (flask, stir rod, and caps) to use with these biological stirrers or order just a flask to use with an existing stirrer.
Sigma Aldrich Fine Chemicals Biosciences TPPR tissue culture flasks
The inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases because undesired tissue adhesion outside the growth zone is diminished. The flasks innovative shape is of such a design that devices inserted through the flasks neck have optimal access to the entire base surface. This means that there are no dead corners that cannot be reached with pipettes or cell scrapers.This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits dribble-free pouring.When the vented screw cap is tightened to the end position the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn the flask is in the VENT position with the inside of the flask being aerated
Chemglass Life Sciences BioProcess Spinner Flask, 1, 000mL, Dimpled Bottom, Internal Impeller, Complete
MicroCarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) prevents accumulation of microcarrier beads under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Antron Engineering LUER-LOK FITG 3/8-24 THREAD
This item has a minimum qty of 3 per supplier requirements.
LUER-LOK FITG 3/8-24 THREAD
Chemglass Life Sciences Impeller Assembly Only, for 1L & 3L Adjustable Hanging Bar Spinner Flasks
Impeller Assembly Only, for 100-500mL Adjustable Hanging Bar Spinner Flasks.
Bellco Glass, Inc. Bio-Probe Spinner,1L
•Material: Type 1 Class A Borosilicate Glass . MADE IN THE USA•Dimensions: 136mm OD x 240mm Overall Height•Two 45mm Side arms angled 60° off center•Two 32mm Side arms angled 35° off center•One 100mm Screw Thread Center Neck•Indented bottom•Graduations: 200mL to 1000mL, every 100mL – White Ink (Approx Volumes)•Supply with: Two 45mm PP Blue Screw Caps, two PP Blue Pouring Rings, two 32mm blue screw caps, and two o-rings