Cell Culture Flasks
Bellco Glass, Inc. MicroCarrier Spinner complete,500mL,100mm Neck
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 500ml Center Cap:100mm Sidearm cap: 45mm OD X OAH:110 X 180
Chemglass Life Sciences Spinner Flask, 100mL, Flat Bottom, Replacement Glass Flask ONLY
Replacement vessel is supplied with black phenolic, rubber lined caps for the 18mm side arms, polypropylene caps and pouring rings for the GL-32 and GL-45 side arms.
Bellco Glass, Inc. IOB w/ MicroCarrier Flask, 8L
Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. MADE IN THE USA. Cap size: 100mm Flask size: 8l Dimensions: 238 x 430mm Sidearm cap: 45mm
Bellco Glass, Inc. Screw Cap 3 Bottom Baffles Fernbach,1800mL With Membrane Cap
Manufactured from Type 1 Class A Borosilicate Glass. Designed for culturing organisms that require a large surface area to volume ratio. Flask is supplied with a GL45 blue polypropylene linerless screw cap and pouring ring.. MADE IN THE USASpecifications:Type 1 Class A Borosilicate GlassSizes: 1800mlOD X OAH (MM):200 X 157Case Quantity: 1
Bellco Glass, Inc. Glass Ball Spinner Complete,6000mL
Description: Glass Ball Spinner Comp, 6000mL. MADE IN THE USASize: 6000mLMaterial: Type 1 Class A Borosilicate GlassFlask Dimensions: 204mm OD x 410mm OAH, two 45mm sidearms offset at 30º, 100mm center neckIncludes two 45mm blue PP screw caps & two 45mm blue PP pouring ringsImpeller Assembly: one 100mm blue PP screw cap, 100mm Teflon cap seal, 100mm blue silicone sealing gasket, soft silicone flex tube, glass ball magnet tube, and magnetSpecially Formed Bottom Indent Prevents Accumulation under impellerGlass ball houses a magnet for gentle agitation of Micro carrier Beads
Bellco Glass, Inc. IOB w/ Water Jacketed Flask,1L
Internal impeller is useful because it decreases risk of contamination thorugh the cap. Has an adjustable shaft to align the paddle with the bottom of the flask. Large paddle promotes increased oxygenation with low shear. Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. MADE IN THE USA.
Bellco Glass, Inc. IOB w/ MicroCarrier Flask, 100mL
Internal impeller decreases risk of contamination. Impeller has an adjustable shaft to align paddle. The large paddle promotes increased oxygenation. MADE IN THE USA. Sealed internal impeller decreases risk of contamination. Specifications:Cap Size: 100mmFlask Size: 100mLPaddle Size: 9 1/2″ x 6″
Chemglass Life Sciences 1L Internal Large Impeller Spinner Flask, Bioprocess, Complete
MicroCarrier spinner flasks with larger paddle design promotes increased optimal growth of suspension and microcarrier cultures.Indented bottom (100mL thru 1000mL) promotes mixing action under the impeller paddle.The 3L version does not have a dimple.The complete system includes a flask with two angled sidearms and a PTFE paddle assembly that attaches underneath the cap decreasing the risk of contamination.
Bellco Glass, Inc. MicroCarrier Spinner Flask Only, 3L No Ctr Cap
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 3l Sidearm cap: 45mm (included)
Chemglass Life Sciences BioProcess Spinner Flask, 1, 000mL, Flat Bottom, Complete
Flat bottom spinner flasks promote optimal growth of suspension cultures.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts through the compression fitting in the cap.
Bellco Glass, Inc. MicroCarrier Spinner Flask complete, 100mL
Promotes optimal growth of suspension and micro-carrier culture. Impeller height adjust through compression fitting center cap. The indented bottom prevents accumulation of micro-carrier beads under impeller. MADE IN THE USA. Size: 100ml Center Cap:70mm Sidearm cap: 32mm OD X OAH:65 X 135
Chemglass Life Sciences BioProcess Spinner Flask, 8, 000mL, Plain Bottom, Complete
Microcarrier spinner flasks promote optimal growth of suspension and microcarrier cultures.Indented bottoms, 100mL thru 1000mL, prevent accumulation of microcarrier beads under the impeller paddle.Please Note: The 6L and 8L Versions Do Not Have Dimpled Bottoms.The complete system includes a flask with two angled sidearms and a PTFE paddle with glass shaft that adjusts trough the compression fitting in the cap.
Bellco Glass, Inc. Water Jacketed Flask Only, 500mL
Flask only. For use circulating water bath or chiller and magnetic stir plate. Hose connection accepts 3/8″ ID silicone tubing (Bellco M7965037) Available complete with micro-carrier impeller assembly or as components. MADE IN THE USA. Specifications:Jacket Volume (mL): 260mlCap Size: 70mmSidearm Cap Size (mm): 38OD x OAH: 110x200mm
Chemglass Life Sciences Spinner Flask Only, 6000mL, Jacketed, BioProcess, Plain Bottom
Water jacketed, flat bottomed spinner flasks consist of a water jacketed spinner flask, manufactured from Type 1 Class A borosilicate glass.Flasks are typically used with a circulating water bath.Jacket volumes are approximate and flasks are not graduated.Note: Paddle and Cap assembly are not included.
Bellco Glass, Inc. Flat Bottom AHB Spinner Complete, 250mL
•Designed for the efficient growth of suspension cells at low speeds•Flask Specifications:. MADE IN THE USAo250 mL flat bottom, Type 1 Class A BorosilicateoDimensions: 85mm OD x 145mm OAHoTwo 32mm Sidearms angled 55º offset centeroOne 70mm Screw thread center neckoGraduations: 50mL to 250mL, every 25mLoIncludes two 32mm blue PP screw caps and pouring rings•Impeller Assembly Specifications:oConsists of PTFE coated magnet and white Teflon magnet holder•Glass Shaft Specifications:oType 1 Class A BorosilicateoDimensions: 7mm OD x 155mm long•Cap Assembly Specifications:oConsists of one 70mm blue PP screw cap with 16.2 mm hole for black compression fitting, 70mm white silicone liner with 15.8mm hole, 7mm black compression fitting