Pump Valves
MSC Ham-Let 3200341 3/8" Stainless Steel Check Valve Inline, Comp x Comp, 3,000 WOG
Ham-Let 3200341 3/8" Stainless Steel Check Valve Inline, Comp x Comp, 3,000 WOG
Chemglass Life Sciences Valve, Chem-Vac, Chem-Cap, Hi-Vac, Three-Way, 0-8mm Bore
Valve, Chem-Vac, Chem-Cap, Hi-Vac, Three-Way, 0-8mm Bore. CHEM-VAC CHEM-CAP valve with three-way configuration for use in construction of manifolds, adapters, etc. See CG-961 for replacement CHEM-CAP plug and CG-906 for glass portion only.
Ace Glass, Inc. Gauge, only, pressure, 0-400psi, stainless steel internal materials, 1/4in male NPT bottom fitting, 2.5in diameter
0-400psi pressure gauge with stainless steel internal materials. Features male NPT bottom fitting. Gauges diameter is 2.5 inches.
AVANTOR MASTERFLEX (VWR LLC) Parker Hannifin PP6VUC6-MG Ball Valve, Polypropylene, Union Connector 3/8'' push-to-connect tube, 1/each
This ball valve is glass reinforced polypropylene body with a polysulfone ball and EPDM seals. It is NSF 51 listed. It also is FDA compliant for contact with food. The plastic design is leak free and corrosion resistant.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Two-way normally closed solenoid pinch valve; 12 VDC, 1/32"" ID x 3/32"" OD tubing
Choose from two-way NC, two-way NO, or three-way pinch valves. These are ideal where contamination is an issue, as the fluid only comes in contact with the tubing, not the valve. Tubing replacement is quick and easy, making these suitable for pharmaceutical or sanitary applications. Mounting clip or mounting flange available separately for increased versatility.
Check All Valve SCV-300-SS-UE-1/2
3 in. SCV style check valve made out 316SS body material with a USP class VI EPDM oring seat and a 1/2 psi spring cracking pressure which is also made out 316SS. The outside oring is also USP class VI EPDM.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Ball valve, 3-way, 1/4"" barb - PVC w/Viton seals
Ball valves are designed primarily for on/off service.
New England Biolabs, Inc. NEBNext Multiplex Oligos for Illumina (96 Unique Dual Index Primer Pairs Set 5) - 96 rxns
Designed for use in library prep for DNA ChIP DNA and RNA (but not Small RNA) the NEBNext Adaptors enable high-efficiency adaptor ligation and high library yields with minimized adaptor-dimer formation. Incorporating a novel hairpin loop structure the NEBNext Adaptor ligates with increased efficiency to end-repaired dA-tailed DNA. The loop contains a U which is removed by treatment with USER Enzyme (a combination of UDG and Endo VIII) to open up the loop and make it available as a substrate for PCR. During PCR barcodes can be incorporated by use of the NEBNext index primers thereby enabling multiplexing.This kit includes 96 pre-mixed unique pairs of i5 and i7 index primers packaged in a single-use 96-well plate with a pierceable foil seal.
Check All Valve SCV-150-SS-UE-1/8
1-1/2 in. SCV style check valve made out 316SS body material with a USP class VI EPDM oring seat and a 1/8 psi spring cracking pressure which is made out of 316SS. The outside oring is also USP class VI EPDM.
Eldex Laboratories Inc High Temperature Burner for Cartridge
Piezo electric ignition, needle valve, and T=1600 degrees celsius.
Electron Microscopy Sciences P47 Scintillator for for JEOL U3, JSM2, 19.0 x 1 mm
They are coated with a thin layer of well selected P47 phosphor (Y1Si2O7:Ce3+; yttrium silicate activated with cerium), and have a high signal output and a good working life. They need not be coated with aluminum prior to use unless cathodoluminescence studies are required. Use on JEOL U3, JSM2.
Size: 19.0 x 1 mm
AVANTOR MASTERFLEX (VWR LLC) Masterflex PTFE Multi-Turn Needle Valve, 1/8"" NPT(F), 316 SS Body, 2800 mL/min water
Maximum pressure is 75 psi; maximum temperature is 200¿>F (93¿>C). Wetted parts are body and O-ring made of PTFE and CTFE valve spindle. Choose aluminum (Al) or 316 stainless steel (SS) body. Orifice is 0.125".