Pump Valves
AVANTOR MASTERFLEX (VWR LLC) Gauge Guard Isolator Sanitary Gasket, Platinum-cured Silicone, 3/4"" Clamp Size
Simple accessories to protect your delicate pressure gauge. Choose from platinum-cured silicone, FKM, EPDM or PTFE materials.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Ball Valve, 2-way, 1/4"" barb, PP with Viton seals
Ball valves are designed primarily for on/off service.
AVANTOR MASTERFLEX (VWR LLC) Manual Pinch Valve, 5/16"" to 3/8"" tube OD
Fluid contacts only the tubing¿ideal for use in pharmaceutical and food industries where eliminating contamination is critical. Obtain precise and repeatable flow rates using easy-to-read metered scale on valve body. Valves are made of Delrin. Tubing is not included¿order flexible tubing with durometer (Shore A) of 60 or less from our "Tubing" section.
AVANTOR MASTERFLEX (VWR LLC) Pure-Fit Flow Control Clamp, Glass Reinforced Nylon Tru Valve
With the Pure-Fit Tru Valve, you no longer need to worry about a time-consuming retrofit to your system. The valve's butterfly design allows easy installation to existing lines; purity is maintained, because the valve goes around the exterior of the tubing and never comes in contact with process fluid. Featuring a simple threaded handle and calibrated scale, the valve ensures accurate control of flow and can also be writtne into validation protocols. The valve also features lockout positioning for use in steam-in-place (SIP) cycles. Its lightweight borosilicate glass-reinforced nylon construction reduces stress on your tubing line due to weight imbalance but is sturdy enough to withstand autoclaving or gamma irradiation. The Pure-Fit Tru Valve will accommodate any flexible tubing up to 0.700" (17.8 mm) in outer diameter.
Thermo Scientific VF-P20 PTFE Pump Head Seals
PTFE seal engineered as leak-proof high pressure and temperature watertight pump seal with chemical resistance.
AVANTOR MASTERFLEX (VWR LLC) Masterflex 3-Way Direct Lift Solenoid Valve; 1/16 24VDC; 30 psi max
Rated for 26" Hg vacuum. Maximum fluid temperature is 158¿F (70¿C). All valves have 15" lead wires. Valves are compact and lightweight ¿ mount them almost anywhere. Valves with a 1/16" orifice have mounting holes at the bottom only and valves with a 3/32" and 5/32" orifice have mounting holes at the top and bottom.
Chemglass Life Sciences Small Zero Dead Space Drain Valve Complete, 1-1/2” beaded pipe, Standard, 3/4" Beaded Pipe Side Arm
Small Zero Dead Space Drain Valve Complete, Standard, 3/4" Beaded Pipe Side ArmSmall Zero Dead Space Drain Valve Complete, Standard, 3/4" Beaded Pipe Side Arm Features: Auto-Stop When Opening The Valve Anodized Aluminum Control Knob Is Laser Etched W/Directional Arrows For Opening & Closing The Valve Zero Dead Space Perfluoro O-Rings On Tip & PlungerZero Dead Space flush bottom valve is designed to prevent solids from collecting in the bottom of the vessel. The PTFE drain valve plunger is supplied with an Perfluoro and a TFE encapsulated o-ring for the tip and two Perfluoro o-rings installed on the shaft. The drain valve is connected to the reactor by a unique 2 beaded pipe valve seat that is sealed to the reactor bottom. Our valve permits total drainage of the vessel contents. The sidearm has a 1 beaded pipe fitting.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Two-Way Valve Mounting Clip; 1"" Diameter Models
Mount, link and control your valves with clips, brackets and cables, as well as controllers.
AGI NORTH AMERICA INC Asia Blue Syringes (500ul/1ml) 10ul to 2.5ml/min
Asia Blue Syringes (500ul/1ml) 10ul to 2.5ml/min
AVANTOR MASTERFLEX (VWR LLC) Masterflex Two-way normally open solenoid pinch valve; 24 VDC, 1/8"" ID x 1/4"" OD tubing
Choose from two-way NC, two-way NO, or three-way pinch valves. These are ideal where contamination is an issue, as the fluid only comes in contact with the tubing, not the valve. Tubing replacement is quick and easy, making these suitable for pharmaceutical or sanitary applications. Mounting clip or mounting flange available separately for increased versatility.
Alta Robbins VALVE 1/4 NPT X 1/4
Valve, 1/4 NPT x 1/4, 1.94 in. Operating pressure vacuum 3500psi, Safety factor: 4: 1, Cv: 0.31, Leakage: Zero, Orifice dia. 0.187 in., Body Material 303 Stainless Steel, Bonnet Material 303 Stainless Steel, Stem Material 303 SS