Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Med Vet International Foam Dressing Allevyn Life 6-1/16 X 6-1/16 Inch With Border Film Backing Silicone Gel Adhesive Quadrilobe Sterile, 66801069, 10/Box
ALLEVYN LIFE is a silicone-gel adhesive, composite hydrocellular foam dressing Redistributes pressure more evenly than traditional foam dressing Up to 7 day wear time (except on the sacrum, which is up to a 5 day wear time) Indicated for shallow, granulating wounds, chronic and acute exudative wounds, full- and partial-thickness wounds such as pressure ulcers, leg ulcers, diabetic foot ulcers, infected wounds, malignant wounds, surgical wounds, first- and second-degree burns, donor sites, skin tears and fungating ulcers Multi-layered design provides cushioning and helps to redistribute pressure Silicone wound contact layer minimizes trauma to the wound and pain to the patient during dressing changes8 while allowing the dressing to be repositoned
Grainger Hose Fitting Sleeve 5/16 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting for use with AQP hose assemblies. It has a working pressure of 3000 psi and temperature range of -65 to +275°F. This compression sleeve is made of brass per SAE J514, has a thread size of 9/16-18 UNF, and is designed for use with 9/16" ID hose. The sleeve measures 1.28" in length. This brass compression sleeve fitting allows easy assembly and provides a heavy duty seal. It is an ideal choice for hydraulic applications using Aeroquip hose.
Grainger Hose Fitting Sleeve 3/16 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting for use with AQP hose assemblies. It has a working pressure of 3000 psi and temperature range of -65 to +275°F. This compression sleeve is made of brass per SAE J514, has a thread size of 9/16-18 UNF, and is designed for use with 9/16" ID hose. The sleeve measures 1.4" in length. This brass compression sleeve fitting allows easy assembly and provides a heavy duty seal. It is ideal for hydraulic applications.
Accuflow Systems TPE Tubing
Purity One™ OneFlex Biopharmaceutical grade TPE tubing has been formulated for demanding and critical fluid transfer applications in Biopharmaceutical processing. OneFlex is an excellent choice for applications that require heat sealing and sterile welding capabilities, and also can be molded for single-use assemblies such as bottle top inserts. Purity One OneFlex is an excellent choice for applications such as sampling, aseptic welding, aseptic sealing, filtration, and sterile filling and transfer. Full validation guide and USP <665> Extractables testing available.
Accuflow Systems Tygon Silicone Tubing, Smooth Bore, 3/16 in ID, 50 ft
Tygon SPT-3350 silicone tubing features an ultra-smooth inner bore designed for sanitary fluid transfer in food and beverage dispensing applications.
- Material: platinum-cured silicone.
- Inner diameter: 3/16 in (4.76 mm).
- Outer diameter: 5/16 in (7.94 mm).
- Wall thickness: 1/16 in (1.59 mm).
- Length: 50 ft (15.24 m).
- Temperature range: -112 °F to 400 °F (-80 °C to 204 °C).
- Certifications: FDA 21 CFR 175.300, NSF 51.
- Typical applications: food and beverage dispensing, sanitary fluid transfer.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/4" X 3/8"- 100 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high termperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 7/16" X 1/2"- 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
Sigma Aldrich Fine Chemicals Biosciences 3CL Mpro protease fluoroge1MG
This is substrate peptide for Main protease from SARS-Cov2 3CL protease (Mpro) . This substrate allows measuring the activity of 3CL protease using a standard plate reader or spectrophotometer.Proteolytic cleavage by 3CL protease will release the flourecent AfC group from the peptide. After relase an increase in floursence is obtained (Ex 400nm Em 505nm) .Thr-Ser-Ala-Val-Leu-Gln-AfCLyophilized from 0.1% TfA in H2O
Accuflow Systems Altafluor 200 FEP (Fluoronated Ethylene Propylene) - 200 FEP, 3/16" X 1/4"- 100 FT
Altafluor 200 FEP (Fluoronated Ethylene Propylene) is an economical choice for applications requiring chemical resistance in combination with broad temperature exposure. Altafluor 200 FEP offers excellent clarity which makes it ideal for sight glass/flow monitoring applications. Certified to NSF 51, NSF 61 and NSF 372. It has superior electrical insulation properties and is available in coiled hose and convoluted tubing constructions. Additionally, the outstanding UV transmission rate of FEP makes it a clear choice for UV transmission applications. Altafluor 200 tubing may be used with flare or conventional fittings.
Grainger Metal Hose 1-1/2 ID x 8 ft.L
The Grainger 16T825 is a Dayton 1/3 HP 115/230V AC electric motor with a totally enclosed fan cooled enclosure. It has a 1,725 RPM operating speed and features sleeve bearings. This single phase motor has a 48Y frame size and measures approximately 9-1/2" long by 5-3/4" wide. It requires a 48Y mount and has a 1/2" diameter shaft with a 1/4" keyway and set screw. The 16T825 operates on 115V AC and draws 8.6 amps, while on 230V AC it draws 4.3 amps. This electric motor is thermally protected for overloads.
