Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Perkin Elmer US LLC 1.0 mm I.D. PTFE Tubing, Qty. 1 m
Other tubing with 0.35 mm - 1.75 mm I.D. available separately.
Hach Company Hach Flare Flow Cell Carrier Line, 35 cm - replacement carrier line for Lachat flow cell assemblies
The Hach Flare Flow Cell Carrier Line (35 cm) is a replacement carrier line used with flow cell assemblies in flow injection analysis equipment. It provides the specified 35 cm length carrier line for positioning a flow cell within the analysis path.
- 35 cm length.
- Flow cell carrier line for flow cell assemblies.
- Replacement part for flow injection analysis systems.
- Provides a consistent carrier length for repeatable positioning of the flow cell.
AVANTOR MASTERFLEX (VWR LLC) 2-STP CHMDRNCE BIO 0.89MM 6PK
Masterflex Ismatec Pump Tubing, 2-Stop, Chem-Durance Bio, 0.89 mm ID; 6/PK, Avantor
Pacer Global LLC Saint-Gobain - 082 BrC-Flex TPE Tubing, 0.25'' ID, 0.5'' OD, 0.125'' Wall, 25 Foot Coil, 1/EA - ACC42019
Saint-Gobain - 082 BrC-Flex TPE Tubing, 0.25" ID, 0.5" OD, 0.125" Wall, 25 Foot Coil, 1/EA
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 1/2" X 5/8 "- 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
Scientific Commodities Inc MEDICAL GRADE PTFE MICRO TUBING (Cat.# BB311-22-100′ Roll)
MEDICAL GRADE PTFE MICRO TUBINGThis medical grade PTFE micro size tubing absorbs practically no common acids, bases or solvents. Do not confuse this grade of tubing with general purpose, commercial & industrial grade PTFE tubing; although it can be used in those applications. It is manufactured with a low level of extractables and is chemically inert. It can be safely used from -410°F (-277°C) TO 500°F (260°C). This translucent 58 shore D tubing is USP class VI certified. It also meets military spec #MIL-L-22129, UL-224. Do not use with molten alkali metals, fluorine or strong fluorinating agents. It can easily be autoclaved or eto sterilized.SCI Cat.# BB311-22Gauge Size: 22Dimensions: I.D. x O.D.: 0.028″ x 0.048″ / 0.711mm x 1.22mm
Accuflow Systems Saint-Gobain Tygon S3 E-3603 Non-DEHP Tubing, 50 ft/Pk
Tygon S3™ E-3603 Non-DEHP Tubing is a bio-based formulation designed for laboratory applications, offering excellent lot-to-lot consistency and non-contaminating properties.
- Bio-based formulation reduces environmental impact.
- Lot-to-lot consistency for reproducible results.
- Non-toxic and non-contaminating.
- Smooth inner wall.
- Slips easily over fittings and grips securely for simple lab set-ups.
- No BPA or phthalates intentionally added.
- Sizes available which hold full vacuum at room temperature.
Pacer Global LLC Saint Gobain 072 C-Flex TPE Tubing, Opaque, 0.125'' ID, 0.25'' OD, 0.0625'' Wall, 50 Foot Coil, 1/EA
Saint-Gobain Coil, 0.125ID (in),0.25 OD (In), 0.0625 Wall (in), 50 Length (ft), 1/EA
Pacer Global LLC Saint-Gobain - SaniTech-65 Tubing, 0.125'' ID, 0.25'' OD, 0.0625'' Wall, 25 Foot Coil, 1/EA - STHT65-125-2
Saint-Gobain - SaniTech-65 Tubing, 0.125" ID, 0.25" OD, 0.0625" Wall, 25 Foot Coil, 1/EA
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Metric PTFE, 6.22 mm ID x 8.00 mm OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. Good for high-purity work. PTFE tubing withstands extreme temperatures. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP 23 Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -400 to 500¿F (-240 to 260¿C) Sterilize: With autoclave, ethylene oxide, or use dry heat.
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX NORPRENE 17 50FT
Masterflex L/S Precision Pump Tubing, Versilon™ A-60-N, L/S 17; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) Ismatec Pump Tubing, 2-Stop, Peroxide-Cured Silicone, 0.76 mm ID; 6/PK
Appearance: Opaque Temperature: -70 to 52¿C Life at 100 rpm: 1000 hrs The first of a series of two-stop extension tubing options is below under Accessories. See all of our two-stop extension tubing formulations or contact our Application Specialists for personal assistance.