Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Teledyne ISCO, Inc 3/8" ID x 25' PTFE suction line with protective coating, without strainer
3/8" ID x 25' PTFE suction line with protective coating, without strainer
Accuflow Systems Saint-Gobain Tygon E-3603 Tubing, 3/16 in ID, 1/4 in OD
Tygon E-3603 thermoplastic tubing is designed for laboratory fluid transfer, peristaltic pump use, and light vacuum service. The phthalate-free formulation provides flexible, thin-walled tubing with consistent dimensional stability and low flow resistance. Packaged in a 50 ft coil for bench and instrument applications.
- 3/16 in inner diameter, 1/4 in outer diameter, 1/32 in wall
- 50 ft (15 m) packaged length
- Phthalate-free formulation
- Minimum bend radius 1 in (25.4 mm)
- Maximum working pressure 14 psi (1.0 bar) at 73°F
- Vacuum rating 9 inHg (229 mmHg)
- Flexible thin wall for low flow resistance
Accuflow Systems Saint-Gobain Tygon S3 Tubing, 3/32 in ID, 50 ft
Tygon S3 E-3603 tubing is a clear, flexible, non-DEHP tubing designed for laboratory, food and beverage, and vacuum transfer applications. It resists flex-fatigue and abrasion, and is supplied as a 50 ft (15 m) continuous length. The tubing is rated for 25 psi working pressure and 29.9 inHg vacuum, and supports autoclave, gamma radiation, and ethylene oxide sterilization methods. It meets FDA food-contact and NSF 51 standards and passes relevant USP/ISO biocompatibility tests.
- Clear flexible tubing for laboratory and food-contact use
- 3/32 in (2.4 mm) I.D., 5/32 in (4.0 mm) O.D., 1/32 in (0.8 mm) wall
- Supplied in 50 ft (15 m) continuous length
- Maximum working pressure 25 psi at 73°F (1.7 bar at 23°C)
- Autoclavable, radiation tolerant, and ethylene oxide sterilizable
- Meets FDA food-contact and NSF 51 standards
- Minimum bend radius 3/8 in (9.5 mm); max recommended temperature 165°F (74°C)
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, Ultra, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
Accuflow Systems Saint-Gobain Tygon Tubing, 2375, 1/4 in ID, 3/8 in OD
Tygon 2375 is an ultra chemical-resistant thermoplastic tubing formulation designed for chemical transfer and applications involving harsh cleaning agents. The formulation is plasticizer-free and non-DEHP, providing low extractables, excellent chemical compatibility, and a clear inner surface for visual flow inspection. Typical uses include chemical transfer lines, detergent and solvent dispensing, analyzer sampling lines, and industrial cleaning systems.
- Formulation: 2375 ultra chemical-resistant tubing.
- Inner diameter: 1/4 in (6.35 mm).
- Outer diameter: 3/8 in (9.53 mm).
- Wall thickness: 1/16 in (1.59 mm).
- Package length: 50 ft per pack.
- Maximum working pressure: 25 psi at 73 °F (23 °C) for this size.
- Temperature range: -103 °F to 130 °F (-75 °C to 54 °C).
- Durometer hardness: 75 Shore A.
- Meets FDA CFR 177.1520 and NSF-51 where applicable.
Accuflow Systems C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 082, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P Precision Pump Tubing, FDA-Compliant Viton, I/P 73; 25 ft
Masterflex FDA-Compliant Viton Precision pump tubing is designed for enhanced chemical compatibility at elevated temperatures. Tubing tolerates the transfer of the harshest chemicals such as corrosive solvents and aliphatic and aromatic hydrocarbons. The ultra-low gas permeability maintains integrity of fluid while protecting the user and environment. Ideal for where FDA compliance and superior chemical compatibility are required.
Accuflow Systems Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 350 ft spool.
Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer3/8 in.idx5/8 in.od x 350 ft spool. Shore A 60 durometer,made with animal free compounds, ClassVI approved
Accuflow Systems Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer1/8 in.idx1/4 in.od x 500 ft spool
Cole Parmer - CFLEX TUBING..Weldable and sealable Thermoplastic Elastomer1/8 in.idx1/4 in.od x 500 ft spool. Shore A 60 durometer,made with animal free compounds, ClassVI approved
Foxx Life Sciences EZBiopure Platinum Cured Silicone Transparent Tubing, 12mm (15/32") ID X 16mm (5/8") OD, 25FT
EZBiopure Silicone Tubing is engineered for peristaltic pumps and fluid transfer in pharma and biotech applications. Its ultra-smooth bore prevents particle entrapment and ensures superior purity. Designed to meet global Food and Pharmaceutical standards.
Features
High Precision: PLC-controlled extrusion using NSF-51 certified platinum-cured silicone resin.
Clean Production: Made and packaged in an ISO Class 7 cleanroom.
Tight Tolerances: Laser-inspected for consistent dimensions.
Compliant: Meets FDA 21 CFR, USP Class VI, USP Class 87, and ISO 10993.
Validated: Extractables/leachable data
Clear & Odorless: Excellent transparency with no taste or odor.
Biocompatible: Inert and safe for tissues and cells.
Compatible with autoclave, Ethylene Oxide, and gamma radiation.
Certifications
USP Class VI Certificate
ISO 10993 Certificate
Phthalates / Bis Phenol / Plasticizer free Certification
TSE/BSE Free Certification
5 years Shelf Life