Tubing Connectors and Fittings
Grainger Pipe Hanger 4 Pipe 316SS
The Grainger suspended tube and pipe hangers are designed to support pipes and tubes from ceilings or overhead structures. They feature a steel construction with a durable powder coat finish and include a threaded rod for height adjustment. The hangers have a load capacity up to 500 lbs and accommodate pipe sizes from 1/4" to 4". They can be used in commercial and industrial applications for suspending pipes, tubing, conduit, ducts, and cables. The hangers provide secure support while allowing for adjustment and movement. They are available in multiple sizes to fit different pipe diameters.
Ace Glass, Inc. Adapter, tee tube compression, DN25 ball, 3/8in glass sidearm
ADAPTER DN25M 3/8IN OD TUBE
Beckman Coulter Titanium Tube Spacer, 38 mm Diameter, for Ultracentrifuge Rotors
Beckman Coulter titanium tube spacer (P/N 342697) is a single-piece titanium spacer designed to position and support 38 x 102 mm centrifuge tubes in compatible ultracentrifuge rotors, ensuring correct tube seating and spacing for high-speed operation.
- 38 mm nominal diameter.
- Compatible with 38 x 102 mm tubes with a 94 mL maximum fill volume.
- Made from titanium for strength and corrosion resistance.
- Designed to ensure proper tube seating and spacing in ultracentrifuge rotors.
- Supports operation up to 45,000 rpm (≈235,000 x g) when used with compatible tubes.
- Sold individually.
Chemglass Life Sciences Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread
Adapter, Tooled Pluro Stopper Flare to 20-400 GPI Thread. Adapter with tooled flare top is used for reduced pressure filtration with plain stem Buchner funnels. Flare accepts a #2 Pluro Stopper. ADAPTER IS NOT SUPPLIED WITH PLURO STOPPER UNLESS PURCHASED AS A KIT. SEE CG-1401 FOR STOPPER. Adapters are used for filtration directly into vials. There are three top configurations, with the bottom of all adapters having a 20-400 GPI thread for connection to vials using a CG-1318 Threaded Connector. Design incorporates a drip tube sealed within thread to prevent breakage and are supplied with a 2-1/2” PTFE delivery stem. Hose connection is 10mm OD at the largest serration. ADAPTERS ARE SUPPLIED WITH PTFE DELIVERY STEM.
Chemglass Life Sciences Adapter, Connecting, 14/20 Joints, 90mm Between Joints, Straight
Adapter, Connecting, 14/20 Joints, 90mm Between Joints, Straight. Used to expand the length of apparatus. Adapter can also be used as an air condenser. With standard taper top outer and lower inner joint.
Chemglass Life Sciences Adapter, Distilling Trap, Kjeldahl, 24/40 Top Outer, 14/20 Lower Inner
Adapter, Distilling Trap, Kjeldahl, 24/40 Top Outer, 14/20 Lower Inner. Similar to CG-1032, but with joints of non-similar sizes at the upper and lower portion of the adapter. Dimensions are the same as the CG-1032.
Ace Glass, Inc. Head, 4in conical flange, four neck, 45/50 center, (2)24/40, 14/35
4 neck reaction flask head with 4(100mm) conical flange. Has 45/50 reinforced outer center neck, and two 29/42 reinforced outer joints, in-line, plus a reinforced 14/35 joint for use with a bushing adapter and/or thermometer.
Chemglass Life Sciences Adapter, Connecting, 10/30 Top Outer, 24/40 Lower Inner, Reducing
Adapter, Connecting, 10/30 Top Outer, 24/40 Lower Inner, Reducing. Used to connect dissimilar standard taper joint sizes. Lower inner joint is larger in size than the top outer joint.
Chemglass Life Sciences Adapter, Distillation, 75°, 24/40 Inner Joints, #7 Chem-Thread
Adapter, Distillation, 75¿, 24/40 Inner Joints, #7 Chem-Thread. Adapter has a #7 Chem-Thread at the top for vacuum tight seal of plain stem thermometers. With the same size inner joints on the bottom and sidearm at a 75¿ angle to one another. Supplied complete with a compression cap and Viton o-ring. FOR THERMOMETERS SEE CG-3503.
Ace Glass, Inc. Nylon adapter, #25 Ace-Thred to #50 Ace-Thred
Nylon adapter, #25 Ace-Thred to #50 Ace-Thred