HPLC Valve and Injector Accessories

MilliporeSigma™ Supelco™ HyperShear Ultra HPLC High Pressure Static Mixer, Binary Tee Housing Assembly, 18,000 psi

HyperShear Mixers incorporate a highly efficient cross-flow shearing mechanism which produces vortex shear mixing over a wide flow range. This mixing technology typically delivers between 25% to 200% better mixing efficiency compared to conventional packed bed or tortuous path mixers.

MilliporeSigma™ Supelco™ Sample Diffusion Discs for LC columns

A 20 μm polyethylene disc sealed to an acrylic ring. Installed on top of column packing in an open-ended column, it protects the packing from disruption.

MilliporeSigma™ Supelco™ Knitted Reactor Coil

For use with PHRED Reactor

MilliporeSigma™ Supelco™ Rheodyne™ Model 7060 Selection Valve

Number of ports: 7 and Number of positions: 6

MilliporeSigma™ Supelco™ Mobile Phase Reservoir System

This convenient system is made entirely of inert parts: glass, Tefzel, PEEK, and PTFE TFE. Includes 10 ft./3 m of 1/8 in. O.D. PTFE tubing, a PEEK bottom-of-the-bottle filter/sparger, a plug, and a 1-liter or 2-liter safety-coated bottle.

MilliporeSigma™ Supelco™ PEEK Inline Microfilter

Install between 2 pieces of capillary tubing, using Microtight tubing sleeves. PEEK housing with special PEEK fitting that encases the 0.5 μm PEEK frit. Through hole 0.006 in., swept volume 0.24 μL. Includes 2 MicroFingertight nuts, and 5 frits (1 installed).

MilliporeSigma™ Supelco™ Micro-Mixer Static Mixers (2 to 25 μL) Housing, Binary

MilliporeSigma™ Supelco™ PlatePrep 96-well Vacuum Manifold Starter kit

The PlatePrep vacuum manifold consists of a clear acrylic top allowing for easier inspection of flow rates during SPE 96-well plate processing. The polypropylene base offers excellent chemical resistance while a single remote vacuum gauge/bleed valve controls flow through all the wells.

MilliporeSigma™ Supelco™ Miniature Regulator with Gauge

Reliable pressure regulation to 1 psig (0.07 kg/cm²), indicated on a 0-60 psi (4.2 kg/cm²) gauge. Easily connects to SCOTTY 14 cylinders with the 1/8-inch NPT connector provided. You can also attach the syringe adapter (Cat. No. 609010) to the regulator for low pressure sample removal. Aluminum body with acetyl resin bonnet. Maximum inlet pressure: 400 psi (28.1 kg/cm²).

MilliporeSigma™ Supelco™ OQ/PV and Installation Kit, API MS

For Mass Spectrometry

MilliporeSigma™ Supelco™ LC column Replacement Bed Supports

For use with flow adapter only.

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, Binary

MilliporeSigma™ Supelco™ Rheodyne™ Stator

MilliporeSigma™ Supelco™ Rheodyne™ Model 9725i PEEK Injector

Manual with MBB and switch, Number of ports: 6, Number of positions: 2

MilliporeSigma™ Supelco™ Low Volume Static Mixer (50 to 250 μL) Housing, In-line