Chromatography Tubing
Waters Corporation Flowcell, Low Flow, ACQUITY TUV
The Waters ACQUITY TUV Flowcell is a critical component for high-performance liquid chromatography systems, integrating advanced light-guiding technology to deliver precise and sensitive detection. This flowcell is engineered for robust performance in demanding laboratory environments.
- Features a light-guiding UPLC flow cell design.
- Incorporates Intelligent Chip Technology for enhanced performance.
- Ensures precise and sensitive detection of analytes.
- Common wetted materials include 316 stainless steel, fused silica, Teflon™ AF, and PEEK.
- Utilizes total internal reflection, analogous to an optical fiber, for efficient light transmission through the sample.
- Facilitates sample introduction and removal via PEEK tubing.
Waters Corp Tubing Assembly, SS, Vent Valve P1 to Mixer 1
Tubing Assembly, SS, Vent Valve P1 to Mixer 1
Waters Corp Tubing Assembly, SS, Transducer to Accumulator
Tubing Assembly, SS, Transducer to Accumulator
Microsolv Technology Corporation Flx Peek Tub.020 Id20Mm Ora
Tubing, PEEK, Coiled, 0.020 ID, 1/16 OD. 945mm L, General Grade, Orange, with Tubing Connectors. MicroSolv Brand. 1/EA.
Perkin Elmer US LLC 4 mm, Ultra Deactivated Single Taper Inlet Liner with Wool for Splitless Inlets
Inlet liners for split injection have mixing chambers with tortuous flow paths to allow full vaporization of the sample. Deactivating the surface of these liners prevents active compounds from degrading. Packing the liner with wool will trap non-volatile residue and prevent column contamination when analyzing dirty samples. Inlet liners for splitless injection are generally designed as straight tubes, although new designs such as the gooseneck will help contain the sample in the injector. Packing these liners with wool will also help trap non-volatile residue and prevent column contamination. For the capillary injector on the Clarus 590 or 690 GC system.
Optimize Technologies 1/16" OD x .040" ID x 20cm Stainless Steel Tubing
Optimize's stainless steel tubing is pre-cut, micro polished, seamless, guarantees square/burr-free ends, and is passivated prior to shipment. The tubing is available in many different lengths and OD/ID sizes. Please contact your Fisher representative or Optimize directly to view a full list of tubing options.
Trajan Scientific Idex PFA tubing, natural, 1/8 X 1/16, 50 feet, 500 psi
PFA Tubing, Idex, natural, 1/8 x 1/16, 50 feet, 500 psi
Waters Corp Tubing Assembly, Stainless Steel, Pre-Heater to Column, Reusable
This reusable stainless steel tubing assembly is designed as a replacement part for connecting a pre-heater to a column, specifically associated with a CH-30A column heater.
- Replacement tubing assembly
- Made of stainless steel
- Connects pre-heater to column
- Reusable
- Associated with a CH-30A column heater
- Designed for UPLC systems
Waters Corp Tubing Assembly, Stainless Steel, Gold Plated, 0.007 in ID, 28 in
This tubing assembly from Waters Corporation is constructed from stainless steel with gold plated ends. It features a precise internal diameter of 0.007 in and a length of 28 in, making it suitable for various laboratory applications.
- Stainless steel construction
- Gold plated ends
- 0.007 in internal diameter
- 28 in length
Waters Corporation Tubing, PTFE, Thin Wall, 2 in.
This replacement tubing is designed for connecting solvent filter assemblies and solvent inlet lines on various sample and solvent managers, separation modules, and HPLC pumps.
- Replacement tubing for solvent filter assemblies and solvent inlet lines.
- Compatible with a range of analytical systems, including various sample managers, separation modules, and HPLC pumps.
- Suitable for carbohydrate applications.
- Applicable to HPLC, UPLC, and purification system types.