Chromatography Fittings
Ace Glass, Inc. Coupling, #25 to #25 Ace-Thred™;, nylon, front seal FETFE; O-rings
25mm diameter thread (#25 Ace-Thred) nylon coupling. For coupling threaded columns together, or coupling threaded columns to end fittings, with single o-ring seal for leak-tight engagement. Supplied with two FETFE o-rings.
Tosoh Bioscience LLC TSKGEL SUPER-ODS GUARD HOLDER
Holder, Guard Filter; For Tosoh TSKgel Super-ODS, -Octyl, and -Phenyl guard filters; 4mm I.D. x 0.4cm Length
Ace Glass, Inc. Column end fitting, #15 to 1/4-28UNF helicoil tap, paper filter disc not included
ADAP COLUMN END NO.15 1/4-28 HELI
Waters Corp Waters PIC B7 Low UV Reagent, 20 mL, 5 Vials
Paired-Ion Chromatography (PIC™ Reagents) offer a straightforward method for analyzing samples that contain ionic species. These reagents facilitate the separation of ionic compounds through reverse-phase chromatography, thereby saving time by enabling the simultaneous assay of acids, bases, amphoteric, and neutral compounds. PIC B7 Low UV is a 5 vial/package of heptane sulfonic acid, designed for use within a workable UV range of 200+ nm in the mobile phase.
- Reversed phase separation mode
- UV detection method
- Liquid formulation
- Room temperature storage condition
- LC system type
- Ambient shipping condition
- Volume: 20 mL
- 5 vials per package
- Contains hazardous material, requiring special freight handling and potential additional charges
Waters Corporation Tubing Assembly, U-Shaped, HPLC-Style Ferrule Seating, 3.9 in.
This tubing assembly is a U-shaped column connector designed for efficient and error-minimized column joining in laboratory settings. It features end ferrules and nuts, with ferrules permanently seated to an HPLC-style depth setting, ensuring a precise connection for compatible hardware.
- U-shaped column connector.
- Includes end ferrules and nuts.
- HPLC-style ferrule seating for compatible hardware.
- Not for use with Parker-style or ACQUITY-based SEC columns.
- Manufactured in ISO-certified plant using ultra-pure reagents.
- Rigorous batch testing ensures consistent, reproducible performance.
- Certified for optimal system performance and compliance.
- Tubing length is approximately 3.9 in.
Waters Corp End Connector Kit, 3.9 mm/4.6 mm I.D., 40 MPa
The Waters End Connector Kit is designed for use with 3.9 mm or 4.6 mm I.D. cartridges. It allows for the replacement of the cartridge while reusing the end-fittings. This kit has a maximum pressure rating of 40 MPa.
- Can be used with any 3.9 mm or 4.6 mm I.D. cartridge.
- Includes two replacement o-rings and one replacement c-clip.
- Maximum pressure rating of 40 MPa.
Waters Corp Waters Bottle Tray Kit, Larger Capacity, HPLC, Separations Modules
The Alliance Bottle Tray Kit is a larger capacity solvent tray designed as an option for all Separations Modules. It works by relocating the detector directly above the column heater or column heater/cooler.
- Minimizes ambient temperature effects on column to detector flow cell tubing.
- Creates more space for larger solvent bottles.
- Enhances routing of solvent and wash line tubings from the top of the system down into the module.
