Gas Purifiers and Traps
Perkin Elmer US LLC Stainless Steel Click-On Triple Trap, Helium-Specific
This moisture trap contains a spring loaded check valve seal when a filter is removed and open only when a new filter has been locked in. There is no need for loosening and tightening fittings every time a trap is changed and your system will remain uncontaminated during the process.
Perkin Elmer US LLC Stainless Steel Oxygen/Moisture/Hydrocarbon Click-On Triple Trap Kit, Brass Fittings
Click-On connectors reduce system downtime and allow you to replace a trap without an open gas line, avoiding the introduction of impurities into the system. This in turn eliminates the need to flush the system. The ability to add a Click-On Inline Super Clean™ Indicator after the stainless steel trap gives the user a clear visual indication of when to change the filter. This indicator may also be used as a standalone trap. Connectors: 1/8 inch, Brass Gas Quality: 100% Maximium Pressure: 11 bar, 160 psi Maximum Flow: 25 L/min Estimated Lifetime: >2 years Use for: Inert Carrier Gas H2O: 6 g Capacity O2: 1,000 mL Hydrocarbons: 12 g (as n-butane)
Ace Glass, Inc. Trap, outer, models R220EX&SE, glassware set C, part 46518
Trap, outer, models R220EX&SE, glassware set C, part 46518
Perkin Elmer US LLC Hydrocarbon Trap
Use our activated charcoal in-line trap to remove gaseous hydrocarbons (C5 and heavier) from nitrogen, hydrogen and inert carrier gas supplies. Recommended for use with purge and trap apparatuses, high-sensitivity FID operations, and GC carrier gases for trace analyses. Frits in each end prevent particulates from entering the gas stream. Trap is shipped filled with helium. Maximum Pressure: 1000 psi (69 bar) Dimensions: 5 cm x 37 cm (including fittings) Weight: 1.0 kg
Perkin Elmer US LLC Ultra Clean Brass Triple Filter Kit - Hydrogen, 0.125 in
The triple combination filter kit is ideal for purifying GC/MS carrier gases. It contains oxygen, moisture and hydrocarbon scrubbers in one easy to change economical cartridge. There is of a range of brass and stainless steel base plate fittings and options for hydrocarbon trap to be helium or hydrogen specific, in addition to the general carrier gas.
Perkin Elmer US LLC Ultra-High Purity 98mL Disposable Helium Gas Cylinder: Purity 99.95% (6/pack)
Disposable helium gas cylinder is a 98 mL stainless steel cylinder at 2500 psi. Helium cylinders are used for both the T-9 GC/MS and SPS-3 during portable operation.
Waters Corp MS Set-up Solution, Atmospheric Pressure Ionization
Standard used for Mass Spec Set up. 2ng/ul Reserpine, 25ng/ul PPG 1000 50ng/ul Triacetyl-B-Cyclodextrin in 50/50 Acetonitrile/Water with 4mM Ammonium Acetate 15mL Nalgene Bottle
Across International Ai -40°C 1.5L Capacity Cold Trap w/ 500ml x 3 Glass Traps ETL
The Ai 2nd Gen -40C/F T40 cold traps are ETL certified. They have a much smaller footprint, but at the same time, offering you the same cooling power.In vacuum applications, a cold trap is a device that condenses all vapors except the permanent gases into a liquid or solid. The most common objective is to prevent vapors being evacuated from an experiment from entering a vacuum pump where they would condense and contaminate it. Particularly large cold traps are necessary when removing large amounts of liquid as in freeze drying.
Phenomenex Inc 1-position Connecting Unit 1/8 in Stainless steel
Zebron™ Gas Management - Connecting Unit AG6-2304
Leap PAL Parts ZPure DS PolyGas II purifier cartridge replacement, brass quick connect
ZPure DS PolyGas II purifier cartridge replacement, brass quick connect
Leap PAL Parts ZPure O2 filter cartridge replacement, stainless steel quick connect
ZPure O2 filter cartridge replacement, stainless steel quick connect
Leap PAL Parts Standard Filter Mounting Kit (With Hardware)
Standard Filter Mounting Kit (With Hardware)