TLC Plates
MilliporeSigma™ Supelco™ Sigma-Aldrich™ TLC Plates, Silica Gel Matrix with Fluorescent Indicator, 200 μm
Sigma-Aldrich™ TLC Plates may be to perform thin layer chromatography.
MilliporeSigma™ TLC Silica Gel 60 F254: 25 Glass plates, 5 x 20cm
Allows analyzation of any substance when combined with suitable mobile phase
MilliporeSigma™ LiChrospher™ 60 RP-18 Silica Gel, WF254, HPTLC Glass Plates
Features a reliable and versatile traditionally produced spherical silica gel. MilliporeSigma™ LiChrospher™ 60 RP-18 Silica Gel, WF254, HPTLC Glass Plates are 20 x 20cm glass HPTLC plates with silica gel coated with WF254s fluore
MilliporeSigma™ TLC Silica Gel 60 F254: 20 Glass plates, Multiformat pre-scored to 5 x 20cm
Allows analyzation of any substance when combined with suitable mobile phase
Florisil™ Standard, Sold by MilliporeSigma™ Supelco™
Florisil, a commercially-prepared magnesia silica gel, for the separation of lipids. It is effective in promoting [1,3]-sigmatropic shift of myceophenolic acid related allyl phenyl ethers. Florisil cartridges are used in atmospheric sampling to assess possible interference from air contaminants.
MilliporeSigma™ Supelco™ HPTLC (High Performance TLC) Glass Plates, Silica Gel 60 Matrix, Binder Polymeric, 200 μm
HPTLC plates may be used to perform high performance thin layer chromatography.
Avantor™ Baker-flex™, Silica Gel IB-F, J.T. Baker™
Flexible TLC Sheet
Avantor™ Baker-flex™, Silica Gel IB, J.T. Baker™
Flexible TLC Sheet
Baker-flex™, Silica Gel IB2, J.T. Baker™
Flexible TLC Sheet
Macherey-Nagel TLC polyerster sheets POLYGRAM SIL G/UV254, 2.5x7.5 cm
POLYGRAM-sheets SIL G/UV254 - size: 2.5x7.5 cm - pack of 200
Miles Scientific Silica Gel, GF 500UM 20X20CM (25 Plates/Bx)
Preparative TLC plates have adsorbent layers thicker than the 250 micron layers normally used for analytical separations. Thus, preparative plates can be used for separation of larger quantities of materials.The loading capacity for a given degree of sample component resolution increases roughly as the square root of the increased adsorbent layer thickness. In preparative TLC, materials to be separated are often applied as long streaks rather than spots. After development, specific compounds may be recovered by scraping the adsorbent layers from the plate in the region of interest and eluting the separated material from the adsorbent using a strong solvent.Thicker layers for higher capacityFull range of plate sizesCalcium sulfate binder-soft later for easy scraping
Sorbent Technologies Inc Silica G TLC Plates, w/UV254, polyester backed, 200um, 2.5x7.5cm, 200/pk
"Silica G" is a standard grade, unmodified Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to a plastic support. It has a thickness of 200um and dimensions of 2.5x7.5cm. There are 200 plates per pack.
Sorbent Technologies Inc Silica XG TLC Plates, w/UV254, aluminum backed, 200um, 2.5x7.5cm, 200pk
"Silica XG" is a standard grade Silica 60 with a surface area of 500 m2/g, mean pore size of 60A, specific pore volume of 0.75 ml/g, and particle size of 5-17um. The TLC plates contain UV254 fluorescent indicator. This analytical soft layer is bound to an aluminum support. It has a thickness of 200um and dimensions of 2.5x7.5cm. There are 200 plates per pack. The Silica XG TLC Plate has outstanding wettability for precise colorization results, even with 100% aqueous detection reagents, and excellent separation efficiency and reproducibility from lot to lot. Cutting the plates is easy and reliable due to an optimized binder system. There is no flaking of silica gel layer. Binder: highly polymeric product, which is stable in almost all organic solvents and resistant towards aggressive visualization reagents; also completely stable in purely aqueous eluents.