TLC Developing Tanks
TLC Developing Tanks
DWK Life Sciences Kimble™ Kontes™ Lid for Rectangular TLC Developing Tank
Standard Lid for TLC Developing Tank
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Rectangular TLC Developing Tanks
Molded glass tanks for development of any size TLC plate up to 20 × 20cm
Promotions are available
Fisherbrand™ Rectangular TLC Developing Tank
Accommodates a variety of plate sizes
MilliporeSigma™ Supelco™ Rhodamine B Solution
0.2% in isopropanol, for TLC derivatization
MilliporeSigma™ Supelco™ Aldrich™ Rectangular TLC Developing Tanks, Complete
TLC Developing Tanks come complete with the developing tank and lid.
MilliporeSigma™ Supelco™ Rectangular TLC Developing Tanks, Complete
TLC Developing Tanks come complete with the developing tank and lid.
MilliporeSigma™ Supelco™ Aldrich™ TLC Developing Tank - Cylindrical Glass Tank
Aldrich™ TLC developing tanks are used to develop TLC plates.
MilliporeSigma™ Supelco™ Latch-Lid™ TLC Developing Chambers
Latch-Lid™ units have a unique stainless steel latching device that holds the lid and tank firmly in place.
MilliporeSigma™ Supelco™ Aldrich™ TLC Developing Tank - Cylindrical Tank Lid
Aldrich™ TLC developing tanks are used to develop TLC plates.
MilliporeSigma™ Supelco™ Aldrich™ Rectangular TLC Developing Tanks, Lid Only
Aldrich™ rectangular TLC developing tanks, lid only may be used to develop TLC plates.
PYREX™ Rectangular Chromatography Tank With Ground Edges
Grounded to close tolerances needed for tight cover fit
PYREX™ Cylindrical Tanks
Tops are ground to close tolerances to ensure tight cover fits
DWK Life Sciences Kimble™ Kontes™ Nonslip Lid for Rectangular TLC Developing Tank
Nonslip Lid for TLC Developing Tanks
Promotions are available
DWK Life Sciences Kimble™ Kontes™ TLC Cylindrical Developing Tanks
Cylindrical glass tanks for the development of 5 × 10cm (2 × 3.9 in. ) and 5 × 20cm (2 × 7.9 in. ) plates
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Chromatography Cylindrical TLC Developing Tanks
Cylindrical glass tanks for the development of 1 x 3 in. to 10 x 20cm plates.
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Lids for Rectangular TLC Developing Tanks
Latches hold lid firmly to the chromatography tank. Fits 20 x 20mm chromatography developing tanks.
Promotions are available
DWK Life Sciences Kimble™ Kontes™ Replacement Caps For Cylindrical TLC Chromatography Developing Tanks
Replacement Caps for TLC developing tank.
Promotions are available
Chemglass Life Sciences TLC Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4.
Chemglass Life Sciences TLC Stopper only, 34/15 Joint Size
Replacement TLC stopper for the CG1181 series of TLC developing chambers. Stopper only, 34/15 Joint Size.
Chemglass Life Sciences TLC Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4
TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4. Cylindrical glass chamber for development of TLC plates from 25 x 75mm to 50 x 200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. The CG-1181-01 and -02 chambers have a hex base for added stability. Complete chamber is supplied with bottle and stopper.
Chemglass Life Sciences TLC Developing Tank Complete, Latch-Lid
Heavy duty, molded TLC developing tank for use with plates up to 20 x 20 cm ( 8in x 8in). The weight of the tank is approximately 15 pounds and the bottom is ground to insure stability. The unique latching system holds the matching ground surfaces of the lid and tank firmly in place, enhancing the stability of the saturated atmosphere for the developing TLC plates. All of the metal components of the Latch-Lid mechanism are made of stainless steel. Inside dimensions of the tank are 27cm wide x 7cm deep x 26 cm high (10 5/8in x 2 7/8in x 10in). Tank is supplied complete with lid.
Chemglass Life Sciences TLC Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 4
Chemglass Life Sciences TLC Developing Tank (Replacement Lid Only)
Replacement lid for the CG118401 TLC Developing Tank. Lid only.
Chemglass Life Sciences TLC Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 8
Replacement TLC bottle for the CG1181 series of TLC developing chambers. Bottle only, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 8.
Miles Scientific Latch-Lid Developing Chamber for 20x20 cm TLC Plates
Analtech's glass TLC developing chambers provide optimum developing conditions for a variety of TLC plate sizes and shapes. Precision ground surfaces provide tight seals between tanks and glass covers and permit complete saturation of chambers with solvent vapor for uniform development of chromatograms. Each chamber is shipped with the appropriate lid. Inside Dimensions: 25 cm H x 28 cm W x 7.5 cm D. For use with: 20 x 20 cm TLC plates or smaller.
Camag Scientific Twin Trough Chamber For 10X10 Cm Plates, With Stainless Steel Lid
This Is A Classical Developing Tank For Thin-Layer Chromatography. Compared To A Flat Bottom Chamber Less Solvent Is Needed. A Twin-Trough-Chamber Reduces Disposal Problems And Allows Preconditioning Of The Plate With Any Solvent And For Any Duration. For Preconditioning Or Saturation, The Trough Opposite To The Plate Is Filled With Developing Solvent. The Use Of A Saturation Pad Is Recommended For A Fast, Homogeneous And Reproducible Chamber Saturation Process. This Tank Is Suitable For Plates Up To 10 X 10 Cm In Size.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3
TLC Developing Chamber Complete, Cylindrical, 34/15 Joint Size, Fits Plate 1in X 3. Cylindrical glass chamber for development of TLC plates from 25 x 75mm to 50 x 200mm. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. The CG-1181-01 and -02 chambers have a hex base for added stability. Complete chamber is supplied with bottle and stopper.
Chemglass Life Sciences TLC Developing Chamber Complete, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4
TLC Developing Chamber, Cylindrical, 60/15 Joint Size, Fits Plate 2in X 4. Chamber has a short length standard taper outer joint. Stopper is a short length inner with a tool ball style handle. Complete chamber is supplied with bottle and stopper.
Chemglass Life Sciences TLC Tank Rack, Aluminum, PTFE Coated
PTFE coated aluminum rack to fit either CG-1183 or CG-1184 TLC developing tank. Rack will hold six 20cm x 20cm x 1/8in or twelve 20cm x 20cm x 1/16in plates.
- 1
- 2