Low to Medium Pressure LC Columns
Chemglass Life Sciences Column, Chromatography, 1/2in ID X 12in E.L., 2mm Stpk
Column, Chromatography, 1/2in ID X 12in E.L., 2mm Stopcock. Similar to CG-1186 but with a sealed in COARSE porosity fritted disc to support column packing. Lower end of the column has a round bottom. Column is constructed using MEDIUM WALL TUBING.
Cole-Parmer Diba Omnifit 006EZ-05-10-AFEZ, Chromatography Column with 1 Fixed & 1 Adjustable Endpiece, 5 mm ID x 100 mm L
Ergonomically designed endpieces provide simple and quick height adjustmentPEEK column threads offer outstanding durabilityPrecision borosilicate glass columns provide inertness, visibility, and performanceSuperior frit placement adds bed support and even distribution of sample flowReusable columns let you pack your own media specific to your application
Chemglass Life Sciences Column, Chromatography, 24/40 Outer Joint, 1/2in ID X 18in E.L., 2mm Stpk
Column, Chromatography, 24/40 Outer Rodaviss Joint, 1 1/2in ID X 8in E.L., 2mm Stopcock. General purpose column having a PTFE stopcock and a top Rodaviss outer joint. Can be used as a gravity eluted column or a flash column (as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC CHEMISTRY 43, 2923 [1978], and covered in U.S. Patent Number 4,293,422 dated October 6, 1981) when used with optional CG-1195 flow controller and CG-1194 reservoir. Column is constructed using MEDIUM WALL TUBING. Glass wool (not supplied) is used to support column packing. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are made using Rodaviss joints. The unique design of the Rodaviss joint affords a grease free seal while holding glassware together without clamps. Column is supplied complete with a CG-182 open top cap and o-ring.
Sepax Technologies Inc Sepax Generik FPLC Empty Column AA, 25 x 250 mm, Glass
FPLC empty column has 3 configurations to choose from: AF(one fixed endpiece and one adjustable endpiece), AA(two adjustable endpieces), and FF(non-adjustable with two fixed endpieces). The versatile glass empty columns are ideal for FPLC purification based on following characters: high pressure tolerance, up to 900 psi (or 60 bar); easy use two adjustable endpieces configuration; wide range of inner diameter, from 6.6 mm to 50 mm with various lengths; and it is compatible with most solvents used in FPLC purification
Chemglass Life Sciences Column, Chromatography, 35/20 Socket Joint, 3/4in ID X 18in E.L., 2mm Stpk
Column, Chromatography, 35/20 Socket Joint, 3/4in ID X 18in E.L., 2mm Stopcock. Absorption chromatography column for rapid preparative separations as described by W.C. Still, M. Kahn and A. Mitra of Columbia University in JOURNAL OF ORGANIC CHEMISTRY 43, 2923 [1978], and covered in U.S. Patent Number 4,293,422 dated October 6, 1981. Moderate resolution can be obtained with this inexpensive to setup and operate column. Column is constructed using MEDIUM WALL tubing. Glass wool (not supplied) is used to support column packing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Connections between the column, reservoir and flow control adapter are spherical joints connected with CG-150 stainless steel clamps.
Chemglass Life Sciences Column, Chromatography, 35/20 Socket Joint, 1 1/2in ID X 18in E.L., 2mm Stpk
Column, Chromatography, 35/20 Socket Joint, 1 1/2in ID X 18in E.L., 2mm Stopcock. Similar to CG-1198 but with a COARSE porosity disc sealed into the lower end of the column for packing support. Column is constructed using MEDIUM WALL tubing. Can be used with optional CG-1201 flow controller and CG-1200 reservoir. Lower end of the column has a round bottom. Connections between the column, reservoir and flow control adapter are spherical joints connected with CG-150 stainless steel pinchclamps.
AGAROSE BEAD TECHNOLOGIES Empty FPLC 8 mL Columns
FPLC column is a single use product suitable for FPLC and ÄKTA design™ chromatography systems. It is recommended to work with approximately 8ml of packed bead bed volume. The package contains 3 columns, 9 frits (polyethylene frit with a nominal pore size of 12 µm), and 6 caps. The FPLC column parts are made of polypropylene which shows excellent chemical resistance to most of the commonly used reagents.
Bioanalytical Systems Inc EC C3 CELL ACCESSORIES KIT
Kit, Accessories; BASi; For C-3 Cell Stand *Does not ship to Puerto Rico
CHROMATOGRAPHIC SPECIALTIES INC 1/4X3.5 SS TUBE UNCAPPED EMPTY
NC3855892 1/4X3.5 SS TUBE UNCAPPED EMPTY
Waters Corp iKey CSH C18 Separation Device, 130à , 1.7 µm, 150 µm X 100 mm, 1/pk
iKey CSH C18 Separation Device, 130à , 1.7 µm, 150 µm X 100 mm, 1/pk
Tosoh Bioscience LLC TSKGEL GUARD FOR G2500-GMPW
Column, Guard; For 7.5mm I.D. Tosoh TSKgel G2500PW-GMPW; Media: Polymer; Particle: 13 micrometer; 7.5mm I.D. x 7.5cm Length