Flask Accessories
Research Products International Corp Glassware Ring Anchors, Size 3, Fits Flasks 500 -2000ml, Weight: 1 1/2 Pound (680 Grams)
Glassware anchors are plastic coated lead weights offered in a one-piece ring shape for use with flasks. Each anchor has a durable and chemically resistant vinyl coating that is non-contaminating. Bright red color helps identify and increase visibility of carefully placed flasks.
WARNING This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Bellco Glass, Inc. 25x25 Flask Tray, 4 1L pre-mounted clamps
Pre-mounted stainless steel clamps for bellco Erlenmeyer flask. Flask tray fits on top of the standard tray platform. Includes clamps.. MADE IN THE USA Flask positions: 4 Dimensions: 25x25" Size: 1l
Ace Glass, Inc. Complete 24/40 10mm bearing, straight adapter style
24/40 10mm straight-adapter style bearing includes all parts needed. Self-aligning, lubricant free PTFE Trubore bearing is designed for use with 10mm O.D. stainless steel or polished glass shafts.
Chemglass Life Sciences Replacement Open (13/16" Hole) GL-32 Gasket Only for Port Assembly
Replacement Open (13/16" Hole) GL-32 Gasket Only for Port Assembly.
Bellco Glass, Inc. IOB Impeller Assembly , 6L
Stainless steel shaft design prevents cell damage and minimizes magnetic decoupling. Sealed internal assembly requires less incubator space. For use with bellco 1965-series standard and water jacketed spinner flasks. MADE IN THE USA. Cap size: 100mm Flask size: 6l PADDLE; (W X H) 6.3/4" X 5"
Bellco Glass, Inc. MicroCarrier Screw Cap Assembly , 100mm Micro-carrier - 6-36L
Micro-carrier screw cap assembly. •Fits center neck of 6L to 36L MicroCarrier Flasks. MADE IN THE USA•Includes: One 100mm blue PP screw cap with 0.77” hole, one 100mm white silicone liner with ¾” hole, one black PP compression fitting with 9mm hole
Chemglass Life Sciences 3-Port Thermowell Assembly for 15L & 36L VSA Vessels, Complete
Our probe holders are designed to secure pH and DO probes into 45mm vertical sidearm vessels.Includes thermoplastic, polyester cap and silicone gasket.This assembly is designed to hold an Ingold pH or DO electrode securely in place in your cell culture vessel via the 45mm sidearm.It consists of: red high temperature 45mm screw cap, 316L SST probe holder with a Pg 13.5 thread, and a white silicone rubber liner. comes fully assembled for fast and easy set-up.
Ace Glass, Inc. PTFE insert 1/2" NPT, 24/40 outer
1/2 NPT PTFE insert with 24/40 outer joint,for use with ACE reaction heads.
Ace Glass, Inc. Head, 100mm(4in), five neck, 29/42 center, (4)24/40
Head, 100mm(4in), five neck, 29/42 center, (4)24/40
Chemglass Life Sciences 2-Port Angled Vent Assembly, 90° 6.35mm/0.25" OD Hose Barbs, GL-45, Universal 316L Electro Polished Stainless Steel, Complete with Gasket and Cap
Universal vent port assembly is constructed of 316L electro polished stainless steel.These port assemblies fit all types of spinner flasks, media bottles and vessels.Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes.Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
Chemglass Life Sciences 2-Port Angled Vent Assembly, GL-32, Universal, 316L Electro Polished Stainless Steel, 3/16" OD Hose Barbs, Complete with Gasket and Cap
Universal vent port assembly is constructed of 316L electro polished stainless steel.These port assemblies fit all types of spinner flasks, media bottles and vessels.Configurations consist of a single vent tube, vent and short fill tubes, or angled vent and fill tubes.Supplied complete with a GL-32 or GL-45 open top cap and silicone gasket.
AVANTOR MASTERFLEX (VWR LLC) FTNG R MLRXB 3/32 PP 10PK
Masterflex Male Rotating Luer Lock and Nut Assembly 3/32 ID in Polypropylene
AVANTOR MASTERFLEX (VWR LLC) FTNG LB MLRXB 1/4 PVDFQC 10PK
Masterflex Large Bore Male Luer 1/4IN ID in Natural PVDF Cleanroom Manufactured, Avantor
Chemglass Life Sciences Reaction Kettle Lid, 6-neck, 200mm
Reaction Kettle Lid, 6-neck, 200mm. Six-Neck lid for 200mm flanged vessel. Lid has 45/50 center neck, four 45/50 side necks and a 60mm angled flange for powder addition.PLEASE NOTE: 60MM LID, O-RING AND CLAMP MUST BE ORDERED SEPARATELY.
PATTERSON VETERINARY SUPPLY INC MICROCLAVE MALE ADAPTER MIN/50
NC3302559 MICROCLAVE MALE ADAPTER MIN/50