Maintenance Lubricants and Penetrating Fluids
Sigma Aldrich Fine Chemicals Biosciences Dow Corning(R) high-vacuum silicone grease colorless, weight 5.3 oz (tube) | 1EA
Dow Corning(R) high-vacuum silicone grease colorless, weight 5.3 oz (tube) | 1EA
Scientific Instrument Services Inc APIEZON GREASE L 25GAPIEZON G
Apiezon L Grease, 25 gram tube, HP #=6040-0289
Scientific Instrument Services Inc Inland 19 Pump Oil, 1 Gallon Bottle
Inland rough pump oil is ideal for use in all models of vacuum pumps including Adixen, Edwards, and Welch. Inland 19 utilizes crude stocks known for their durability and fine lubricating qualities. Precision distillation further enhances these characteristics while providing a cleaner, cooler running, longer-lasting oil that in many instances will provide improved pumping cycles. Inland 19 is effective in those cases where operating temperatures are not a problem, especially in the lower speed belt-driven pumps. Providing the least back streaming, Inland 19 is particularly well suited for use with the high grade diffusion pump fluids, such as the polyphenyl ethers (Santovac 5 and Convalex 10), silicones, and ester-based fluids. Direct-drive pumps that are not subject to extreme operating conditions can use Inland 19 to achieve the same advantages. Durability and performance highlight Inland 19's capabilities. Inland 19 replaces Inland 15.
Ted Pella Inc PELCO Conductive Graphite, Isopropanol base, 30g
Conductive graphite paint, primarily designed for SEM sample preparation. The graphite flakes, with an average size of 1µm, are bonded by a cellulose resin with isopropanol as diluent. Good bonding properties on most materials. Graphite content is 20%. Ideal to mount samples on sample stubs or to make a conductive path to the sample surface. Let fully dry before using in the SEM. Maximum service temperature: 200° C.
Scientific Instrument Services Inc VACUUM PUMP FLUID
Inland 45 Rough Pump Oil, 1 Gal. Bottle, HP #=6040-0798
PFEIFFER VACUUM INC RESOVOIR FELT OIL LUBRCNT PAD
This item has a minimum order quantity of 2 per supplier requirements. RESOVOIR FELT OIL LUBRCNT PAD
ELITechGroup Aerospray Hematology Stat, Basofix™ Pre-dip Fixative, 500mL
Basofix is a system of reagents for staining peripheral blood smears with the Wescor Aerospray Hematology Slide Stainer. Its purpose is to fix granules of basophilic leukocytes in the slide.
Leica Biosystems Cyanoacrylate Adhesive | 7085-85-0 | MFCD00045615 | 10 g
Cyanoacrylate Adhesive | Mol Wt: 125.13 | 7085-85-0 | MFCD00045615 | 10 g
R E Carroll Inc IRM 902 Oil 1 Gal
Testing oil for ASTM D471 Standard Test Method to evaluate the comparative ability of rubber and rubber-like compositions to withstand the effect of liquids.
Krayden DC 184 KIT 3.9KG/8.8LB
SYLGARD(R) 184 SILICONE ELASTOMER BASE ,8.8 lb, Dow Corning 184 8.8 lb,Two-part; 10:1 mix; minimal shrinkage; no exothermduring cure; no solvents or cure by-products; deep section cure; repairable; good dielectric properties
Ellsworth Adhesive Co Dow Sylgard 184 Silicone Encapsulant, Clear, 0.5 kg Kit
The Dow Sylgard 184 Silicone Encapsulant Clear 0.5 kg Kit is a two-part silicone elastomer that cures at room temperature to a flexible elastomer. It is used for potting, encapsulating, coating, and mold making. The kit contains 0.5 kg of base and 0.5 kg of curing agent. It has a 1:1 mix ratio by weight, cures in 24 hours at 25C, has a viscosity of 3500 cP, tensile strength of 6.2 MPa, elongation of 170%, dielectric strength of 20 kV/mm, and volume resistivity of 2.9 x 1015 ohm cm. The operating temperature range is -45 to 200C. It has good adhesion and is resistant to moisture, dust, chemicals, and repeated thermal cycling.