Gas Cylinder Dollies and Trucks
Grainger Electric Chain Hoist 6000 lb 10 ft.
The CM Lodestar H4 Electric Chain Hoist is a compact, lightweight hoist designed for lifting and pulling applications up to 4 tons. It features a three phase motor with thermal overload protection, precision machined gears, and a load brake to hold the load in place. The hoist has a lifting speed of 8/4 fpm and can lift up to 32 feet. It comes with a 20 foot lift of load chain, an upper and lower limit switch, and overload protection. The hoist requires a 3 phase power supply and is made of durable steel construction. It meets ASME specifications.
Grainger Electric Chain Hoist 2000 lb 15 ft.
The Harrington H4 Heavy Duty Electric Chain Hoist has a lifting capacity of 4 tons (8,000 lbs). It features a 3 phase motor and trolley mounting, with a lift speed of 8 ft/min. The hoist has a lift height of 20 ft and comes with a 20 ft lift chain. It requires 460V AC 3 phase power. Safety features include an automatic brake, overload protection, and upper and lower limit switches. The hoist meets ASME specifications and comes with a 1 year warranty on defects. With rugged steel construction, this heavy duty electric hoist is well suited for demanding material handling applications.
Grainger Electric Chain Hoist 10 000 lb 10 ft.
The Dayton Electric Chain Hoist H2 Light is a compact, lightweight hoist for lifting and pulling up to 2 tons. It features a 120V AC motor with thermal overload protection, precision hardened alloy steel load chain, and rugged steel alloy housing. It has a lift speed of 16 feet per minute, lift height up to 20 feet, and a 20-foot lift chain. Operate it with the attached 10-foot cord or hardwire it. Safety features include an automatic brake and overload limiter. UL listed and CSA certified, this hoist is ideal for light-duty lifting applications.
Uline Dual Gas Cylinder Hand Truck
Dual Gas Cylinder Hand Truck, heavy-gauge steel, continuous handle, chain secures tanks up to 12" in diameter, 10" solid rubber wheels, 500lbs capacity
RDP CORPORATION LCC/LCD1-16 STD SPARE PRT KIT
(LCC/LCD1-16 & 1-51) Standard Spare Parts KitThe Spare Parts Kit for all models includes the following: Fuses, circuit board with relays, SSR and door seal.The price of the kit is 10% less than if each of the parts were purchased independently
RDP CORPORATION LCC/LCD1-51 208 V 1- FULL POWR
(LCC/LCD1-51)208 Volt/1-Phase Full PowerThe oven is designed to operate on 240 Volt, but will operate on 208 Volt without modifications, resulting in a 25% heater capacity reduction. 208 Volt operation without modifications requires 25% longer to reach the maximum operating temperature. The 208 Volt full power option restores the heater to full capacity. Lower voltage results in higher amperage. The FLA of the LCC/D1-51 with 208 Volt full#2;power will increase from 27.7 amps to 31.5 amps. An oven equipped with the 208 Volt full power option cannot be operated on 240 Volt.
Electron Microscopy Sciences Molding Cup Tray, 5 mm height
These polyethylene trays are ideal for casting specimen blocks embedded with JB-4 or equivalents and are used with our block holders and chucks shown above.
Size: 2 x 15 mm
Height: 5 mm
Cayman Chemical LCC-12formate 5mg
A copper (II) chelator and derivative of metformin; binds copper (II) as a monomer and reduces its hydrogen peroxide-dependent oxidation of NADH to NAD+ at 20 µM; decreases the levels of the cytokines IL-1β, IL-2, IL-6, IL-8, and TNF-α, as well as levels of JAK2, STAT2, and IRAK4, in primary human cytokine-activated MDMs at 10 µM; reduces the numbers of CD80+ and CD86+ cytokin-activated MDMs at 10 µM; increases survival in mouse models of sepsis induced by LPS or cecal ligation and puncture at 0.3 mg/kg per day
Usa Safety Solutions LLC GRN CYLINDER CART GC900108SC
1 Cylinder Oxygen & Medical Gases (D,E, M9, M60) - Green - Cylinder Cart Model # GC900108SC
Grainger Electric Chain Hoist 1000 lb 20 ft.
The Harrington H4 Heavy Duty Electric Chain Hoist has a lifting capacity of 4 tons (8,000 lbs). It features a 3 phase motor and trolley mounting, with a lift speed of 8 ft/min. The hoist has a lift height of 20 ft and comes with a 20 ft lift chain. It requires 460V AC 3 phase power. Safety features include an automatic brake, overload protection, and upper and lower limit switches. The hoist meets ASME specifications and comes with a 1 year warranty on defects. With rugged steel construction, this heavy duty electric hoist is designed for demanding industrial lifting applications.
Grainger Electric Chain Hoist 6000 lb 15 ft.
The Electric Chain Hoist from Grainger is a portable lifting device designed for vertical lifting applications. It features a 1/4 ton capacity, 115V AC operation, 10 ft lift, and 16fpm lifting speed. The hoist has a rugged steel frame and liftwheel brake for controlled lifting. It comes with a 20ft lift chain and hook. The hoist requires minimal maintenance and meets ASME specifications. With portable operation and 1/4 ton capacity, this electric hoist is well-suited for light duty lifting applications.