Drills and Drill Bits
Grainger Flush Trim Profile Router Bit 1/2
The Westward Flush Trim Profile Router is a handheld power tool designed for trimming and shaping wood, laminate, and plastic. It has a 1-1/4 HP motor with a variable speed range of 10,000-30,000 RPM. The router comes with a 1/4" collet and accepts 1/4" and 1/2" shank router bits. It features a soft start motor to help maintain control when starting cuts. The aluminum motor housing helps dissipate heat during extended use. This router also has a depth stop turret with five preset depth stops for consistent, repeatable cuts. The tool weighs 4.4 lbs.
Grainger Threading Tool 1/4 Carbide
The Grainger 16T431 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a lifting range of 10-3/8 inches to 16-1/4 inches and a lowered height of 9-3/8 inches. This hydraulic jack has a two-piece handle for easy pumping and is designed for use on hard level surfaces. It has a welded base for stability with rubber saddle to prevent slippage. The 16T431 bottle jack has a maximum lift height of 16-1/4 inches and conforms to ASME PALD standards. This heavy duty hydraulic jack is rated for 16 tons lifting capacity.
Grainger Sq. End Mill Single End Carb 11/64
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a straight shank and is uncoated with an overall length of 2-1/2", shank diameter of 1/2", and flute length of 1-1/4". This end mill provides accurate cuts in steel, aluminum, and other non-ferrous materials. The square end allows plunging into workpieces and machining of pockets with square corners and edges. It is designed for use on CNC or manual milling machines.
Grainger Threading Tool 5/16 Carbide
The Grainger 16T116 is a 16-ton hydraulic bottle jack made by Hein-Werner. It has a minimum height of 10-3/4 inches and a maximum height of 16-1/4 inches. The jack has a welded base for stability with rubber pads to prevent slipping. It has a two-piece handle for easy pumping and controlled lifting. The jack's capacity is 16 tons (32,000 lbs). It weighs 43 lbs and has a one year warranty. The jack is designed for garage, auto repair, machinery and plant maintenance applications.
Grainger End Mill Kyocera MEC 1250S1257917 1.25
The Kyocera 170HH2 is a 1/2" diameter, 2 flute, high helix end mill made of micrograin carbide with TiAIN coating. It has a 1-1/2" LOC and can be run at speeds up to 325 SFM. The end mill features variable helix flutes to reduce harmonics and chatter and is designed for slotting, profiling, and contouring in steels, stainless steels, cast iron, aluminum, and other non-ferrous metals. It has a center cutting design allowing plunge cuts and is made in Japan by Kyocera, a leading manufacturer of precision cutting tools.
Grainger Sq. End Mill Single End Carb 5/32
The Micro 100 Square End Mill Center Cutting 14F944 is a square end milling cutter made by Micro 100. It has a 1/4 inch shank diameter, 1/2 inch cutter diameter, 2 inch overall length, and 2 flute count. This carbide end mill is center cutting and has square ends for milling 90 degree shoulders. It can machine steels, stainless steels, cast iron, aluminum, and other non-ferrous materials. With its sharp cutting edges, this end mill provides accurate right angle shoulders in slotting, side milling, and facing operations.
Grainger Threading Tool 1/2 Carbide
The Micro 100 Threading Tool is a 1/2" shank threading tool with a 60 degree included angle and a 0.040" nose radius. It has a TiN coating for increased tool life and can cut a variety of thread sizes and pitches. The tool has an overall length of 5" and a flute length of 1-1/2". It is made from micro-grain carbide for strength and durability. The threading tool can be used on most common materials including steel, stainless steel, cast iron, aluminum, brass, bronze, plastics and more. It is well-suited for production threading applications.
Grainger End Mill Kyocera MEC 0750S62511T 0.750
The Kyocera 170HG2 is a 2 flute, high speed steel end mill with a 1/2" shank diameter. It has an overall length of 3-1/2" and a cutting diameter of 1/2". The end mill features a 135 degree split point tip and is designed for high feed milling in a variety of materials including steels, cast iron, aluminum, copper, brass, plastics and composites. With its high speed steel construction, this end mill provides good wear resistance and tool life. The 170HG2 is well-suited for slotting, side milling and contouring operations.
Grainger Cor Rad End Mill 5/16 Carb 0.0100 rad
The Grainger 14T036 is a 14 inch diameter, 36 inch long, A36 carbon steel pipe with a schedule 40 wall thickness. It has a plain end finish and is made in the USA. The pipe has a weight of 63.2 lb/ft and can withstand a pressure rating of 490 psi at 100 degrees F. It meets ASTM A53 specifications and is typically used for low pressure steam, water, air and other liquids in plumbing, sprinkler systems, irrigation systems and other applications. The carbon steel construction provides good tensile strength and corrosion resistance.
