Animal Surgical Equipment Accessories
Instech Luer stub, 22ga (blue) x 0.25in (6mm), non-sterile, pack of 100
The Instech LS22/6 is a non‑sterile 22‑gauge blue luer stub used for connecting infusion tubing or catheters to syringes or other male luer fittings. It includes a polypropylene hub with a stainless‑steel blunt, deburred tip to prevent tubing damage. LS22/6 is supplied non‑sterile in a pack of 100 for short‑length infusion and sampling workflows.
Features
- Gauge: 22ga (blue hub)
- Length: 0.25 inch (6 mm)
- Connection Type: Female luer for tubing-to-syringe interfaces
- Hub Material: Polypropylene
- Tip Material: Stainless-steel, blunt and deburred
- Sterility: Non-sterile
- Package Configuration: Pack of 100
- Use Case: Infusion and sampling workflows in preclinical research
Complete tubing set for Instech ABS2, 020 silicone, no low loss. For automated blood sampling from rats.
The Instech ABS2/TS020NL is a complete tubing set designed for the ABS2™ Automated Blood Sampler. Built from 020-size silicone tubing in a no–low-loss configuration, it supports accurate automated blood sampling by maintaining reliable fluid flow and minimizing dead volume. This tubing set is optimized for rat studies and integrates directly with ABS2 peristaltic pump pathways for consistent sampling performance.
Features
- Tubing Type: 020 silicone
- Configuration: No low loss
- Application: Automated blood sampling from rats
- Compatibility: ABS2 Automated Blood Sampler
- Function: Maintains steady fluid flow for sampling and IV fluid return
- Quantity: 1 complete tubing set
Mating tether for Vascular Access Harness™ or Button for mice. 7in (18cm), polyurethane in fluid path. Compatible with Instech 25ga plastic swivels. For mouse infusion and blood sampling.
The Instech VAH62T is a sterile mouse tether designed for use with the Vascular Access Harness™ (VAH62AB series), providing a secure, low‑dead‑volume connection for infusion or blood sampling. Built to mate with 25ga low‑torque swivels, the 7in (18cm) spring tether protects the externalized catheter while allowing free movement during studies, ensuring smooth, aseptic connection to the harness port.
Features
- Sterile tether for mouse Vascular Access Harness™ systems
- 7in (18cm) spring tether length
- Compatible with 25ga low‑torque swivels
- Provides clean, low‑volume connection to harness port
- Supports mouse infusion and blood sampling workflows
- Protects externalized catheter while allowing mobility
World Precision Instrument Rodent Facemask Kit for Anesthesia-OC-ALLFM-KIT
These rodent gas masks fits mice and rats of all sizes, and they are versatile for a wide variety of applications. The OC gas masks allow you access to the eyes and head of the rodent while sealing the nose and mouth. The gas masks provides stability of the animal for examinations and surgery, and they can be easily incorporated in existing examination procedures. The waste-line connects to gravity or vacuum filters, and swiveling ports allow for greater flexibility in positions. The are easily adapted for stereotaxic applications.
Braintree Scientific MICROVETTE CB 300 W/SERUMUM
Microvette CB 300; Capillary collection and sample container in one unit. The Microvette CB 300 capillary tube, along with its attached push cap, is supplied complete with a carrier tube that is also suited for transport and centrifugation. **Sold for research purposes only and not for human use**
World Precision Instrument Rat Restrainer for II-MRBP, 400-600 gram
WPI's Mouse and rat tail cuff blood pressure measuring systems for preclincial research, a true turn-key system when it is key critical for determining accurate, consistent blood pressure on mice, rats or any other laboratory animal test subject. A compact, simple yet versatile system that can test from a single up to 200 animals at a time with independent control of each channel. Simple daisy-chaining of systems allow expansion of systems, up to 200 independently, controlled channels. No other system in the world has such vast capabilities as the IITC blood pressure systems. Single animal systems are controlled from the touch screen which allows keying in all necessary test setups. These rodent restrainers are used with the non-invasive blood pressure tail cuff system for mice and rats. They can also be use for tail vein injections or other studies where the animal needs to be restrained.
Med Vet International Ph Tattoo Ink Jar, Black, 3Oz, Each
Produces crisp, permanent tattoo marks. Easy to work with. Indelible black.Best results are obtained by shaking the pen thoroughly, writing the ID once on the tag using the Allflex tag pen, letting the ink dry and then writing over the ID a second time. Following these steps should provide you with an ID that is readable in the paddock for years!Products are not always manufacturer specific. Actual product appearance may differ from website image.
World Precision Instrument Mouse Restrainer, 25-70 grams
WPI's Mouse and rat tail cuff blood pressure measuring systems for preclincial research, a true turn-key system when it is key critical for determining accurate, consistent blood pressure on mice, rats or any other laboratory animal test subject. A compact, simple yet versatile system that can test from a single up to 200 animals at a time with independent control of each channel. Simple daisy-chaining of systems allow expansion of systems, up to 200 independently, controlled channels. No other system in the world has such vast capabilities as the IITC blood pressure systems. Single animal systems are controlled from the touch screen which allows keying in all necessary test setups. These rodent restrainers are used with the non-invasive blood pressure tail cuff system for mice and rats. They can also be use for tail vein injections or other studies where the animal needs to be restrained.
Innovative Reseach Of America 17B-ESTRADIOL 0.25MG/PELLET,50
17ß-Estradiol 0.25mg/pellet 90 Day Release - 50 pellets
Instech PinPort extension set: PinPort connector, 12in (30cm) PU tubing, 25ga luer stub, sterile
Use a PinPort™ connector to access a PinPort™ at the end of a segment of tubing. Applications include acute experiments where tethering is not necessary, or external tubing connections where the self-sealing septum in the PinPort™ is helpful.
The connectors are 12mm long and feature 22ga or 25ga inputs. The tube that pierces the PinPort™ septum is 25ga. The connectors can be built into extension sets with luers; see below for a standard 30cm set or contact us for custom lengths.
For laboratory animal research use only.
Features
- 22ga or 25ga input
- Low dead volume
- Quick, clean connection
Instech Mouse tail vein cannula, 29ga, 50cm PE-10 tube, PinPort and injector
The Instech C10SS-MTV2021P is a 29-gauge (29ga) stainless steel tail vein cannula for manual dosing or sampling in restrained mice. This model features a sharp needle tip for direct vessel access and a 5.9 in (15 cm) segment of PE-10 extension tubing. To facilitate a low-dead-volume closed system, it includes an integrated PinPort™ and an injector for aseptic access. Because it uses a sharp stainless steel needle, it is intended for immediate experimental use rather than long-term implantation. Each unit is individually packaged and EtO sterilized to maintain surgical-grade standards for laboratory research.
Features
- Vessel Application: Mouse tail vein
- Needle Gauge: 29ga (0.3mm OD) stainless
- Tubing: 5.9 in (15 cm) PE-10
- Access: Integrated PinPort™ and injector
- Tip Design: Sharp (non-implantable)
- Sterilization: Individually packaged, EtO